Solvent effects on Pt-Ru/C catalyst for methanol electro-oxidation

Alloying degree, particle size and the level of dispersion are the key structural parameters of Pt-Ru/C catalyst in fuel cells. Solvent（s） used in the preparation process can affect the particle size and alloying degree of the object substance, which lead to a great positive impact on its properties. In this work, three types of solvents and their mixtures were used in preparation of the Pt-Ru/C catalysts by chemical reduction of metal precursors with sodium borohydride at room temperature. The structure of the catalysts was characterized by X-ray diffraction （XRD） and Transmission electron microscopy （TEM）. The catalytic activity and stability for methanol electro-oxidation were studied by Cyclic Voltammetry （CV） and Chronoamperometry （CA）. Pt-Ru/C catalyst prepared in H2O or binary solvents of H2O and isopropanol had large particle size and low alloying degree leading to low catalytic activity and less stability in methanol electro-oxidation. When tetrahydrofuran was added to the above solvent systems, Pt-Ru/C catalyst prepared had smaller particle size and higher alloying degree which resulted in better catalytic activity, lower onset and peak potentials, compared with the above catalysts. Moreover, the catalyst prepared in ternary solvents of isopropanol, water and tetrahydrofuran had the smallest particle size, and the high alloying degree and the dispersion kept unchanged. Therefore, this kind of catalyst showed the highest catalytic activity and good stability for methanol electro-oxidation.

Reaction mechanism of aqueous-phase conversion of γ-valerolactone(GVL) over a Ru/C catalyst

The present work explores the reaction pathways of γ-valerolactone(GVL) over a supported ruthenium catalyst. The conversion of GVL in aqueous phase over a 5% Ru/C catalyst was investigated in a batch reactor operating at 463 K under 500–1000 psi of H2. The main reaction products obtained under these conditions were 2-butanol(2-BuOH), 1,4-pentanediol(1,4-PDO), 2-methyltetrahydrofuran(2-MTHF) and 2-pentanol(2-PeOH). A complete reaction network was developed, identifying the primary and/or secondary products. In this reaction network, production of 2-BuOH via decarbonylation of a ring-opened surface intermediate CH3CH(O*)–(CH2)2–CO*is clearly the dominant pathway. From the evolution of products as a function of reaction time and theoretical(DFT) calculations, a mechanism for the formation of intermediates and products is proposed. The high sensitivity of 2-BuOH production to the presence of CO, compared to a much lower effect on the production of the other products indicates that the sites responsible for decarbonylation are particularly prone to CO adsorption and poisoning. Also, since the decarbonylation rate is not affected by the H2 pressure it is concluded that the direct decarbonylation path of the CH3CH(O*)–(CH2)2–CO*intermediate does not required a previous dehydrogenation step, as is the case in decarbonylation of short alcohols.

Inhibiting effect of tungstic compounds on glucose hydrogenation over Ru/C catalyst

The effect of acid component including various conventional acids and tungstic compounds on glucose hydrogenation over a series of binary catalyst system containing Ru/C catalyst was investigated. The results showed that HC1, H2SO4, H3BO3, H3PO4, and HNO3 had negligible effect, while all the tungstic compounds imposed inhibiting effects on the hydrogenation of glucose over Ru/C catalyst, and the suppressing effect followed the order of H2WO4〉HPW〉WO3〉AMT〉HSiW. This order is the same as the order of ethylene glycol （EG） yields in the one-pot conversion of glucose to EG, suggesting the important role of competition between glucose hydrogenation and retro-aldol condensation in controlling the selectivity of EG.

Pt-Ru Catalysts Prepared by a Modified Polyol Process for Direct Methanol Fuel Cells

Supported PtRu/C catalysts used in direct methanol fuel cells (DMFCs) were prepared by a new modified polyol method. Transmission electron microscopy (TEM), X-ray diffraction (XRD) and cyclic voltammograms (CVs) were carried out to characterize the morphology, composition and the electrochemical properties of the PtRu/C catalyst. The results revealed that the PtRu nanoparticles with small average particle size (≈2.5 nm), and highly dispersed on the carbon support. The PtRu/C catalyst exhibited high catalytic activity and anti poisoned performance than that of the JM PtRu/C. It is imply that the modified polyol method is efficient for PtRu/C catalyst preparation.

Selective CO Methanation over Ru Catalysts Supported on Nanostructured TiO2 with Different Crystalline Phases and Morphology

Nanostructured titanium dioxides were synthesized via various post-treatments of titanate nanofibers obtained from titanium precursors by hydrothermal reactions. The microstructures of TiO2 and supported Ru/TiO2 catalysts were characterized with X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray analysis, and nitrogen adsorption isotherms. The phase structure, particle size, morphology, and specific surface area were determined. The supported Ru catalysts were applied for the selective methanation of CO in a hydrogen-rich stream. The results indicated that the Ru catalyst supported on rutile and TiO2-B exhibited higher catalytic performance than the counterpart supported on anatase, which suggested the distinct interaction between Ru nanoparticles and TiO2 resulting from different crystalline phases and morphology.

高分散Ru/Si_(3)N_(4)催化剂的制备及其在CO_(2)加氢中的应用

氮化硅是一种良好的载体,具有较高的水热稳定性和机械稳定性,其表面的氨基基团能够较好地锚定金属,显著提高金属分散度。但是,商品氮化硅比表面积较低,对金属分散作用仍然有限。因此,以自制的高比表面积氮化硅(Si_(3)N_(4))为载体,通过浸渍法制备了不同Ru负载量(质量分数分别为0.5%、1.0%和2.0%)的催化剂(分别为0.5%Ru/Si_(3)N_(4)、1.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)),并以商品氮化硅(Si_(3)N_(4)-C)为载体制备了2.0%Ru/Si_(3)N_(4)-C催化剂作为对照组。表征了催化剂的理化性质,测试了其在300℃、0.1 MPa下的CO_(2)加氢反应活性。结果显示,与Si_(3)N_(4)-C相比,Si_(3)N_(4)的比表面积较高(502 m^(2)/g),Si_(3)N_(4)作为载体显著提高了金属分散度,降低了金属粒径,催化剂暴露出更多的活性位点。0.5%Ru/Si_(3)N_(4)的金属粒径较小,展现出强的H_(2)吸附能力,H难以解吸,抑制了中间物种CO加氢生成CH_(4)。随着Ru负载量增加,金属粒径增大,催化剂的CH_(4)选择性更好。Ru/Si_(3)N_(4)系列催化剂中,2.0%Ru/Si_(3)N_(4)的CH_(4)选择性较高(98.8%)。空速为10000 m L/(g·h)时,0.5%Ru/Si_(3)N_(4)的CO选择性为88.2%。与2.0%Ru/Si_(3)N_(4)相比,2.0%Ru/Si_(3)N_(4)-C的金属粒径更大,活性位点较少,活性更低。2.0%Ru/Si_(3)N_(4)和2.0%Ru/Si_(3)N_(4)-C的CO_(2)转化率分别为53.1%和9.2%。Si_(3)N_(4)有效提高了金属分散度,提高了催化剂的CO_(2)加氢反应活性;通过调控Ru负载量控制催化剂金属粒径,可实现对产物CO或CH_(4)选择性的调控。

Ru/AC和Ru-NPs/AC催化剂对乙炔氢氯化反应催化活性的比较

针对乙炔氢氯化反应无汞催化剂的开发,Ru基催化剂是最具工业潜力的催化剂之一。结合表面积分析仪(BET)、程序升温还原(TPR)、透射电镜(TEM)和程序升温脱附(TPD),以及动力学实验探究了导致Ru/AC(AC为活性炭)和高温H_(2)处理后Ru-NPs/AC催化性能差异的原因。在排除内、外扩散的条件下,通过动力学实验判断了反应级数,初步推测了基元反应步骤和决速步骤。结果表明,Ru-NPs/AC相对于Ru/AC总反应速率更低,表观活化能更高,这是由于高温H_(2)处理后活性组分的分散度降低、Ru物种被还原,并且导致活性中心对C_(2)H_(2)的吸附性能降低。

制备方法对Ru/CeO_(2)催化氨分解性能的影响

采用共沉淀法、沉积沉淀法和浸渍法制备了Ru/CeO_(2)催化剂,利用XRD、N_(2)吸附-脱附、SEM、CO_(2)-TPD、H_(2)-TPD、H_(2)-TPR、XPS、N_(2)-TPD等方法对催化剂进行表征,并考察了催化剂的氨分解性能。实验结果表明,共沉淀法制备的Ru/CeO_(2)-CP催化剂在450℃、气时空速15000 h-1条件下,氨转化率可达80.7%,是沉积沉淀法和浸渍法制备Ru/CeO_(2)催化剂的1.3,2.7倍。共沉淀法制备的催化剂表面疏松,具有最大的比表面积,为催化剂提供了更为丰富的碱性位点。CeO_(2)载体与Ru金属间的强相互作用有利于电子从CeO_(2)向Ru的转移,提高了Ru粒子表面的电子密度,促进了N物种在催化剂表面的结合脱附。

Effect of the graphitic degree of carbon supports on the catalytic performance of ammonia synthesis over Ba-Ru-K/HSGC catalyst

A series of high surface area graphitic carbon materials （HSGCs） were prepared by ball-milling method. Effect of the graphitic degree of HSGCs on the catalytic performance of Ba-Ru-K/HSGC-x （x is the ball-milling time in hour） catalysts was studied using ammonia synthesis as a probe reaction. The graphitic degree and pore structure of HSGC-x supports could be successfully tuned via the variation of ball-milling time. Ru nanoparticles of different Ba-Ru-K/HSGC-x catalysts are homogeneously distributed on the supports with the particle sizes ranging from 1.6 to 2.0 nm. The graphitic degree of the support is closely related to its facile electron transfer capability and so plays an important role in improving the intrinsic catalytic performance of Ba-Ru-K/HSGC-x catalyst.

Efficient aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid on Ru/C catalysts

2,5-Furandicarboxylic(FDCA) is a potential substitute for petroleum-derived terephthalic acid, and aerobic oxidation of5-hydroxymethylfurfural(HMF) provides an efficient route to synthesis of FDCA. On an activated carbon supported ruthenium(Ru/C) catalyst(with 5 wt% Ru loading), HMF was readily oxidized to FDCA in a high yield of 97.3% at 383 K and 1.0 MPa O_2 in the presence of Mg(OH)_2 as base additive. Ru/C was superior to Pt/C and Pd/C and also other supported Ru catalysts with similar sizes of metal nanoparticles(1–2 nm). The Ru/C catalysts were stable and recyclable, and their efficiency in the formation of FDCA increased with Ru loadings examined in the range of 0.5 wt%–5.0 wt%. Based on the kinetic studies including the effects of reaction time, reaction temperature, O_2 pressure, on the oxidation of HMF to FDCA on Ru/C, it was confirmed that the oxidation of HMF to FDCA proceeds involving the primary oxidation of HMF to 2,5-diformylfuran(DFF) intermediate, and its sequential oxidation to 5-formyl-2-furancarboxylic acid(FFCA) and ultimately to FDCA, in which the oxidation of FFCA to FDCA is the rate-determining step and dictates the overall formation rate of FDCA. This study provides directions towards efficient synthesis of FDCA from HMF, for example, by designing novel catalysts more efficient for the involved oxidation step of FFCA to FDCA.

A highly stable and active mesoporous ruthenium catalyst for ammonia synthesis prepared by a RuCl_3/SiO_2-templated approach

Molecular nitrogen is relatively inert and the activation of its triple bond is full of challenges and of significance.Hence,searching for an efficiently heterogeneous catalyst with high stability and dispersion is one of the important targets of chemical technology.Here,we report a Ba‐K/Ru‐MC catalyst with Ru particle size of 1.5–2.5 nm semi‐embedded in a mesoporous C matrix and with dual promoters of Ba and K that exhibits a higher activity than the supported Ba‐Ru‐K/MC catalyst,although both have similar metal particle sizes for ammonia synthesis.Further,the Ba‐K/Ru‐MC catalyst is more active than commercial fused Fe catalysts and supported Ru catalysts.Characterization techniques such as high‐resolution transmission electron microscopy,N2 physisorption,CO chemisorption,and temperature‐programmed reduction suggest that the Ru nanoparticles have strong interactions with the C matrix in Ba‐K/Ru‐MC,which may facilitate electron transport better than supported nanoparticles.

Effects of Reaction Conditions on Performance of Ru Catalyst and Iron Catalyst for Ammonia Synthesis

Activated carbon-supported Ru-based catalyst and A301 iron catalyst were prepared,and the influences of reaction temperature,space velocity,pressure,and H2/N2 ratio on performance of iron catalyst coupled with Ru catalyst in series for ammonia synthesis were investigated.The activity tests were also performed on the single Ru and Fe catalysts as comparison.Results showed that the activity of the Ru catalyst for ammonia synthesis was higher than that of the iron catalyst by 33.5%-37.6% under the reaction conditions：375-400 °C,10 MPa,10000 h-1,H2︰N2 3,and the Ru catalyst also had better thermal stability when treated at 475 °C for 20 h.The outlet ammonia concentration using Fe-Ru catalyst was increased by 45.6%-63.5% than that of the single-iron catalyst at low tem-perature （375-400 °C）,and the outlet ammonia concentration increased with increasing Ru catalyst loading.

Scission of C–O and C–C linkages in lignin over RuRe alloy catalyst

The performance of lignin depolymerization is basically determined by the interunit C–O and C–C bonds.Numerous C–O bond cleavage strategies have been developed, while the cleavage of C–C bond between the primary aromatic units remains a challenging task due to the high dissociation energy of C–C bond.Herein, a multifunctional Ru Re alloy catalyst was designed, which exhibited exceptional catalytic activity for the cleavage of both C–O and C–C linkages in a broad range of lignin model compounds(β-1, a-5, 5–5,β-O-4, 4-O-5) and two stubborn lignins(kraft lignin and alkaline lignin), affording 97.5% overall yield of monocyclic compounds from model compounds and up to 129% of the maximum theoretical yield of monocyclic products based on C–O bonds cleavage from realistic lignin. Scanning transmission electron microscopy(STEM) characterization showed that Ru Re(1:1) alloy particles with hexagonal close-packed structure were homogeneously dispersed on the support. Quasi-in situ X-ray photoelectron spectroscopy(XPS), and X-ray absorption spectroscopy(XAS) indicate that Ru species were predominantly metallic state, whereas Re species were partially oxidized;meanwhile, there was a strong interaction between Ru and Re, where the electron transfer from Re to Ru was occurred, resulting in great improvement on the capability of C–O and C–C bonds cleavage in lignin conversion.

Highly selective CO methanation over amorphous Ni-Ru-B/ZrO_2 catalyst

Amorphous Ni-Ru-B/ZrO2 catalyst was prepared by the means of chemical reduction, and selective CO methanation as a strategy for CO removal in fuel processing applications was investigated over the amorphous Ni-Ru-B/ZrO2 catalyst. The result showed that, at the temperature of 210-230 ℃, the catalyst was shown to be capable of reducing CO in a hydrogen-rich reformate to less than 10 ppm, while keeping the CO2 conversion below 1.55% and the hydrogen consumption below 6.50%. ？2009 Xin Fa Dong. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Study on the Nanosized Amorphous Ru-Fe-B/ZrO_2 Alloy Catalyst for Benzene Selective Hydrogenation to Cyclohexene

A novel nanosized amorphous Ru-Fe-B/ZrO2 alloy catalyst for benzene selective hydrogenation to cyclohexene was investigated. The superior properties of this catalyst were attributed to the combination of the nanosize and the amorphous character as well as to its textural character. In addition, the concentration of zinc ions, the content of ZrO2 in the slurry, and the pretreatment of the catalyst were found to be effective in improving the activity and the selectivity of the catalyst.

Construction of bifunctional single-atom catalysts on the optimized β-Mo_(2)C surface for highly selective hydrogenation of CO_(2) into ethanol

Green and economical CO_(2)utilization is significant for CO_(2)emission reduction and energy development.Here,the 1D Mo_(2)C nanowires with dominant(101)crystal surfaces were modified by the deposition of atomic functional components Rh and K.While unmodifiedβMo_(2)C could only convert CO_(2)to methanol,the designed catalyst of K_(0.2)Rh_(0.2)/β-Mo_(2)C exhibited up to 72.1%of ethanol selectivity at 150℃.It was observed that the atomically dispersed Rh could form the bifunctional active centres with the active carrierβMo_(2)C with the synergistic effects to achieve highly specific controlled C–C coupling.By promoting the CO_(2)adsorption and activation,the introduction of an alkali metal(K)mainly regulated the balanced performance of the two active centres,which in turn improved the hydrogenation selectivity.Overall,the controlled modification ofβMo_(2)C provides a new design strategy for the highly efficient,lowtemperature hydrogenation of CO_(2)to ethanol with single-atom catalysts,which provides an excellent example for the rational design of the complex catalysts.

Tuned selectivity and enhanced activity of CO_(2) methanation over Ru catalysts by modified metal-carbonate interfaces

Carbonate-modified metal-support interfaces allow Ru/MnCO_(3) catalyst to exhibit over 99% selectivity,great specific activity and long-term anti-CO poisoning stability in atmospheric CO_(2) methanation.As a contrast,Ru/MnO catalyst with metal-oxide interfaces prefers reverse water-gas shift rather than methanation route,along with a remarkably lower activity and a less than 15% CH_(4) selectivity.The carbonatemodified interfaces are found to stabilize the Ru species and activate CO_(2) and H_(2) molecules.Ru-CO^(4) species are identified as the reaction intermediates steadily formed from CO_(2) dissociation,which show moderate adsorption strength and high reactivity in further hydrogenation to CH_(4),Furthermore,carbonates of Ru/MnCO_(3) are found to be consumed by hydrogenation to form CH_(4) and replenished by exchange with CO_(2),which are in a dynamic equilibrium during the reaction.Modification with surface carbonates is proved as an efficient strategy to endow metal-support interfaces of Ru-based catalysts with unique catalytic functions for selective CO_(2) hydrogenation.

Ru surface density effect on ammonia synthesis activity and hydrogen poisoning of ceria-supported Ru catalysts

Evaluating the effect of metal surface density on catalytic performance is critical for designing high-activity metal-based catalysts.In this study,a series of ceria(CeCO_(2))-supported Ru catalysts(Ru/CeCO_(2))were prepared to analyze the effect of Ru surface density on the catalytic performance of Ru/CeCO_(2) for ammonia synthesis.For the Ru/CeCO_(2) catalysts with Ru surface densities lower than 0.68 Ru nm^(-2),the Ru layers were in close contact with CeCO_(2),and electrons were transferred directly from the CeCO_(2) defect sites to the Ru species.In such cases,the adsorption of hydrogen species on the Ru sites in the vicinity of 0 atoms was high,leading to a high ammonia synthesis activity and strong hydrogen poisoning.In contrast,the preferential aggregation of Ru species into large particles on top of the Ru overlayer resulted in the coexistence of Ru clusters and particles,for catalysts with a Ru surface density higher than 1.4 Ru nm^(-2),for which Ru particles were isolated from the direct electronic influence of CeCO_(2).Consequently,the Ru-Ceth interactions were weak,and hydrogen poisoning can be significantly alleviated.Overall,electron transfer and hydrogen adsorption synergistically affected the synthesis of ammonia over Ru/CeCO_(2) catalysts,and catalyst samples with a Ru surface density lower than 0.31 Ru nm^(-2) or exactly 2.1 Ru nm^(-2) exhibited high catalytic activity for ammonia synthesis.

Ru/FeO_x catalyst performance design: Highly dispersed Ru species for selective carbon dioxide hydrogenation

A series of Ru/FeOx catalysts were synthesized for the selective hydrogenation of CO2to CO.Detailed characterizations of the catalysts through X‐ray diffraction,X‐ray photoelectron spectroscopy,transmission electron microscopy,and temperature‐programmed techniques were performed to directly monitor the surface chemical properties and the catalytic performance to elucidate the reaction mechanism.Highly dispersed Ru species were observed on the surface of FeOx regardless of the initial Ru loading.Varying the Ru loading resulted in changes to the Ru coverage over the FeOx surface,which had a significant impact on the interaction between Ru and adsorbed H,and concomitantly,the H2activation capacity via the ability for H2dissociation.FeOx having0.01%of Ru loading exhibited100%selectivity toward CO resulting from the very strong interaction between Ru and adsorbed H,which limits the desorption of the activated H species and hinders over‐reduction of CO to CH4.Further increasing the Ru loading of the catalysts to above0.01%resulted in the adsorbed H to be easily dissociated,as a result of a weaker interaction with Ru,which allowed excessive CO reduction to produce CH4.Understanding how to selectively design the catalyst by tuning the initial loading of the active phase has broader implications on the design of supported metal catalysts toward preparing liquid fuels from CO2.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences toward preparing liquid fuels from CO2.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.

Selective CO methanation over amorphous Ni-Ru-B/ZrO_2 catalyst for hydrogen-rich gas purification

Amorphous Ni-Ru-B/ZrO2 catalysts were prepared by chemical reduction method. The effects of Ni-Ru-B loading and Ru/Ni mole ratio on the catalytic performance for selective CO methanation from reformed fuel were studied, and the catalysts were characterized by BET, ICP, XRD and TPD. The results showed that Ru strongly affected the catalytic activity and selectivity by increasing the thermal stability of amorphous structure, promoting the dispersion of the catalyst particle, and intensifying the CO adsorption. For the catalysts with Ru/Ni mole ratio under 0.15, the CO methanation conversion and selectivity increased significantly with the increasing Ru/Ni mole ratio. Among all the catalysts investigated, the 30 wt% Ni-Ru-B loading amorphous Ni61Ru9B30/ZrO2 catalyst with 0.15 Ru/Ni mole ratio presented the best catalytic performance, over which higher than 99.9% of CO conversion was obtained in the temperature range of 230℃-250℃, and the CO2 conversion was kept under the level of 0.9%.