Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films ...Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films withnanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisoprenc-block-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50 μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass faction of 20% relative to the triblock or the totalPtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrixof PCEMA and Pl. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannelswere formed by extracting out hPtBA with solvent. Alternatively. larger channels were obtained from extracting out hPtBAand hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeabilityconstants ～6 orders of magnitude higher than that of low-density polyethylene films.展开更多
Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment we...Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.展开更多
The objective of this research paper is to study numerical relationships between a block of a finite group and a defect group of such block. We define a new notion which is called a strongly k(D)- block and give a nec...The objective of this research paper is to study numerical relationships between a block of a finite group and a defect group of such block. We define a new notion which is called a strongly k(D)- block and give a necessary and sufficient condition of a block with a cyclic defect group to be a k(D) -block in term of its inertial index. We believe that the notion and the results in this work will contribute to the developments of the theory of blocks of finite groups.展开更多
文摘Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films withnanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisoprenc-block-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50 μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass faction of 20% relative to the triblock or the totalPtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrixof PCEMA and Pl. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannelswere formed by extracting out hPtBA with solvent. Alternatively. larger channels were obtained from extracting out hPtBAand hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeabilityconstants ～6 orders of magnitude higher than that of low-density polyethylene films.
文摘Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.
文摘The objective of this research paper is to study numerical relationships between a block of a finite group and a defect group of such block. We define a new notion which is called a strongly k(D)- block and give a necessary and sufficient condition of a block with a cyclic defect group to be a k(D) -block in term of its inertial index. We believe that the notion and the results in this work will contribute to the developments of the theory of blocks of finite groups.
