Generally complex 3D contours are divided into a lot of continuous small line blocks by CAD/CAM software. When these small line blocks are used in conventional way,machine tool has to stop at the end of one move befor...Generally complex 3D contours are divided into a lot of continuous small line blocks by CAD/CAM software. When these small line blocks are used in conventional way,machine tool has to stop at the end of one move before continuing on to the next to meet accuracy requirement,which results in inefficiency.Look-ahead is an intelligent function that aims at adjusting the feed rate automatically to achieve maximum productivity while maintaining accuracy.By now most researchers just utilize the simplest linear acceleration(ACC)and deceleration(DEC)to deal with look-ahead intelligence.A generalized ACC/DEC ap- proach and corresponding optimal look-ahead algorithm based on dynamic back tracking along a doubly linked list are proposed.An improved rounding strategy for reducing interpolation errors is also presented.By using the proposed techniques,arbitrary velocity profiles that offer look-ahead feature and have the desired ACC/DEC characteristics for movement of a lot of continuous line blocks can be generated efficiently.Both simulations and experiments showed the productivity was dramatically increased without sacri- fice of accuracy.展开更多
The global oceanic/atmospheric tides exert decelerating/accelerating secular torques on the Earth rotation. We developed new formulations to accurately calculate amounts of two kinds of secular tidal torques. After Me...The global oceanic/atmospheric tides exert decelerating/accelerating secular torques on the Earth rotation. We developed new formulations to accurately calculate amounts of two kinds of secular tidal torques. After Melchior, we found that an additional factor 1+k-l = 1.216, which has been formerly neglected, must be multiplied unto the tidal torque integral. By using our refined formulations and the recent oceanic/atmospheric global tide models, we found that:(i) semidiurnal oceanic lunar/solar tides exert decelerating torques of about-4.462 × 10^(16)/-0.676 × 10^(16) Nm respectively and(ii) atmospheric S_2 tide exerts accelerating torque of 1.55 × 10^(15) Nm. Former estimates of the atmospheric S_2 tidal torque were twice as large as our estimate due to improper consideration of loading effect. We took the load Love number for atmospheric loading effect from Guo et al.(2004). For atmospheric loading of spherical harmonic degree two, the value of k′=-0.6031 is different from that for ocean loading as k′ =-0.3052,while the latter is currently used for both cases-ocean/atmospheric loading-without distinction. We discuss(i) the amount of solid Earth tidal dissipation(which has been left most uncertain) and(ii) secular changes of the dynamical state of the Earth-Moon-Sun system. Our estimate of the solid Earth tidal torque is-4.94×10^(15) Nm.展开更多
To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed c...To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.展开更多
The distinguishing feature of a vertical ball screw feed system without counterweight is that the spindle system weight directly acts on the kinematic joints.Research into the dynamic characteristics under acceleratio...The distinguishing feature of a vertical ball screw feed system without counterweight is that the spindle system weight directly acts on the kinematic joints.Research into the dynamic characteristics under acceleration and deceleration is an important step in improving the structural performance of vertical milling machines.The magnitude and direction of the inertial force change significantly when the spindle system accelerates and decelerates.Therefore,the kinematic joint contact stiffness changes under the action of the inertial force and the spindle system weight.Thus,the system transmission stiffness also varies and affects the dynamics.In this study,a variable-coefficient lumped parameter dynamic model that considers the changes in the spindle system weight and the magnitude and direction of the inertial force is established for a ball screw feed system without counterweight.In addition,a calculation method for the system stiffness is provided.Experiments on a vertical ball screw feed system under acceleration and deceleration with different accelerations are also performed to verify the proposed dynamic model.Finally,the influence of the spindle system position,the rated dynamic load of the screw-nut joint,and the screw tension force on the natural frequency of the vertical ball screw feed system under acceleration and deceleration are studied.The results show that the vertical ball screw feed system has obviously different variable dynamics under acceleration and deceleration.The influence of the rated dynamic load and the spindle system position on the natural frequency under acceleration and deceleration is much greater than that of the screw tension force.展开更多
Severe fluctuation of the effective roll gap in the acceleration and deceleration section of the cold rolling process is a significant factor causing thickness deviation.However,the conventional roll gap compensation ...Severe fluctuation of the effective roll gap in the acceleration and deceleration section of the cold rolling process is a significant factor causing thickness deviation.However,the conventional roll gap compensation method and control strategy do not meet the stringent strip quality requirements.The roll gap model in the acceleration and deceleration process is studied to increase the thickness control precision.In order to improve model accuracy,a roll gap prediction method based on data-driven is proposed.Given the complexities of the cold rolling process,the extreme gradient boosting(XGBoost)method is used to predict the roll gap model as the rolling speed changes.Meanwhile,support vector regression and neural network-based methods are taken to evaluate and compare the prediction performances.Based on the field data,the simulation experiments are carried out.It demonstrated that the prediction performance of the proposed method outperformed the other two methods.The values of root mean square error,determination coefficient value,mean absolute percentage error and mean absolute error obtained from the XGBoost model were equal to 0.000346,0.952,7.02,and 0.00028,respectively.In addition,the proposed method analyzed the contribution rates of the rolling affecting parameters on the roll gap.The data showed that in the controllable rolling parameters,the rolling speed is the most impacting factor that disturbs the roll gap model in the acceleration and deceleration process,which can provide a useful direction for actual roll gap adjustment.展开更多
Recent developments in the exploration of the universe suggest that it is in an accelerated phase of ex-pansion.Accordingly,our study aims to probe the current scenario of the universe with the aid of the reconstructi...Recent developments in the exploration of the universe suggest that it is in an accelerated phase of ex-pansion.Accordingly,our study aims to probe the current scenario of the universe with the aid of the reconstruction technique.The primary factor that describes cosmic evolution is the deceleration parameter.Here,we provide a physically plausible,newly defined model-independent parametric form of the deceleration parameter.Further,we constrain the free parameters through statistical MCMC analysis for different datasets,including the most recent Pantheon+.With the statistically obtained results,we analyze the dynamics of the model through the phase trans-ition,EoS parameter,and energy conditions.Also,we make use of the tool Om diagnostic to test our model.展开更多
Studies show that different geometries of a Variable Cycle Engine(VCE)can be adjusted during the transient stage of the engine operation to improve the engine performance.However,this improvement increases the complex...Studies show that different geometries of a Variable Cycle Engine(VCE)can be adjusted during the transient stage of the engine operation to improve the engine performance.However,this improvement increases the complexity of the acceleration and deceleration control schedule.In order to resolve this problem,the Transient-state Reverse Method(TRM)is established in the present study based on the Steady-state Reverse Method(SRM)and the Virtual Power Extraction Method(VPEM).The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE.Obtained results are compared with the conventional component-based model from different aspects,including the accuracy and the convergence rate.The TRM is then employed to optimize the control schedule of a VCE.Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model.On the other hand,it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45%and 54%,respectively.Meanwhile,the surge margin of compressors,fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria.It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.展开更多
The acceleration saltation of the traditional S-type acceleration model in the speed planning of the NURBS curve will result in the vibration and flexible impact of the machine tool.It will affect the surface quality ...The acceleration saltation of the traditional S-type acceleration model in the speed planning of the NURBS curve will result in the vibration and flexible impact of the machine tool.It will affect the surface quality of the components.The high speed smooth S-type acceleration and deceleration model deals with flexible impact,but the calculation is tedious.Aimed at the above problems,the traditional S-type acceleration and deceleration model is improved to make the jerk change linearly at a certain slope to reduce the flexible impact.Before the speed planning,it is needed to find the arc length and curvature of each point on the NURBS curve with a tiny step,and to determine the speed sensitivity point on the curve accordingly.According to the speed sensitive point,the NURBS curve is segmented.The attribute parameters of each section are determined by adaptive speed planning.Then,the speed planning can be performed on the NURBS curve according to the speed characteristics classification.The simulation results show that the algorithm can effectively reduce the flexible impact,improve the machining precision and efficiency,and simplify the classification of speed characteristics.展开更多
文摘Generally complex 3D contours are divided into a lot of continuous small line blocks by CAD/CAM software. When these small line blocks are used in conventional way,machine tool has to stop at the end of one move before continuing on to the next to meet accuracy requirement,which results in inefficiency.Look-ahead is an intelligent function that aims at adjusting the feed rate automatically to achieve maximum productivity while maintaining accuracy.By now most researchers just utilize the simplest linear acceleration(ACC)and deceleration(DEC)to deal with look-ahead intelligence.A generalized ACC/DEC ap- proach and corresponding optimal look-ahead algorithm based on dynamic back tracking along a doubly linked list are proposed.An improved rounding strategy for reducing interpolation errors is also presented.By using the proposed techniques,arbitrary velocity profiles that offer look-ahead feature and have the desired ACC/DEC characteristics for movement of a lot of continuous line blocks can be generated efficiently.Both simulations and experiments showed the productivity was dramatically increased without sacri- fice of accuracy.
基金supported by the Space Geodesy Technology Development Program of Korea Astronomy and Space Science Institutesupported by the NSFC(grant Nos.41631072,41721003,41574007 and 41429401)the Discipline Innovative Engineering Plan of Modern Geodesy and Geodynamics(grant No.B17033)
文摘The global oceanic/atmospheric tides exert decelerating/accelerating secular torques on the Earth rotation. We developed new formulations to accurately calculate amounts of two kinds of secular tidal torques. After Melchior, we found that an additional factor 1+k-l = 1.216, which has been formerly neglected, must be multiplied unto the tidal torque integral. By using our refined formulations and the recent oceanic/atmospheric global tide models, we found that:(i) semidiurnal oceanic lunar/solar tides exert decelerating torques of about-4.462 × 10^(16)/-0.676 × 10^(16) Nm respectively and(ii) atmospheric S_2 tide exerts accelerating torque of 1.55 × 10^(15) Nm. Former estimates of the atmospheric S_2 tidal torque were twice as large as our estimate due to improper consideration of loading effect. We took the load Love number for atmospheric loading effect from Guo et al.(2004). For atmospheric loading of spherical harmonic degree two, the value of k′=-0.6031 is different from that for ocean loading as k′ =-0.3052,while the latter is currently used for both cases-ocean/atmospheric loading-without distinction. We discuss(i) the amount of solid Earth tidal dissipation(which has been left most uncertain) and(ii) secular changes of the dynamical state of the Earth-Moon-Sun system. Our estimate of the solid Earth tidal torque is-4.94×10^(15) Nm.
基金the Hi-Tech Research and Development Pro-gram (863) of China (No. 2006AA04Z233)the National NaturalScience Foundation of China (No. 50575205)the Natural ScienceFoundation of Zhejiang Province (Nos. Y104243 and Y105686),China
文摘To satisfy the need of high speed NC (numerical control) machining, an acceleration and deceleration (acc/dec) control model is proposed, and the speed curve is also constructed by the cubic polynomial. The proposed control model provides continuity of acceleration, which avoids the intense vibration in high speed NC machining. Based on the discrete characteristic of the data sampling interpolation, the acc/dec control discrete mathematical model is also set up and the discrete expression of the theoretical deceleration length is obtained furthermore. Aiming at the question of hardly predetermining the deceleration point in acc/dec control before interpolation, the adaptive acc/dec control algorithm is deduced from the expressions of the theoretical deceleration length. The experimental result proves that the acc/dec control model has the characteristic of easy implementation, stable movement and low impact. The model has been applied in multi-axes high speed micro fabrication machining successfully.
基金Supported by Key Program of National Natural Science Foundation of China(Grant No.51235009)National Natural Science Foundation of China(Grant No.51605374).
文摘The distinguishing feature of a vertical ball screw feed system without counterweight is that the spindle system weight directly acts on the kinematic joints.Research into the dynamic characteristics under acceleration and deceleration is an important step in improving the structural performance of vertical milling machines.The magnitude and direction of the inertial force change significantly when the spindle system accelerates and decelerates.Therefore,the kinematic joint contact stiffness changes under the action of the inertial force and the spindle system weight.Thus,the system transmission stiffness also varies and affects the dynamics.In this study,a variable-coefficient lumped parameter dynamic model that considers the changes in the spindle system weight and the magnitude and direction of the inertial force is established for a ball screw feed system without counterweight.In addition,a calculation method for the system stiffness is provided.Experiments on a vertical ball screw feed system under acceleration and deceleration with different accelerations are also performed to verify the proposed dynamic model.Finally,the influence of the spindle system position,the rated dynamic load of the screw-nut joint,and the screw tension force on the natural frequency of the vertical ball screw feed system under acceleration and deceleration are studied.The results show that the vertical ball screw feed system has obviously different variable dynamics under acceleration and deceleration.The influence of the rated dynamic load and the spindle system position on the natural frequency under acceleration and deceleration is much greater than that of the screw tension force.
基金supported by the National Natural Science Foundation of China(Grant Nos.U21A20117 and 52074085)the Liao Ning Revitalization Talents Program(XLYC1907065)+1 种基金Liao Ning Province Doctoral Initiation Fund(2022-BS-188)Open Research Fund from State Key Laboratory of Rolling and Automation(No.2021RALKFKT006).
文摘Severe fluctuation of the effective roll gap in the acceleration and deceleration section of the cold rolling process is a significant factor causing thickness deviation.However,the conventional roll gap compensation method and control strategy do not meet the stringent strip quality requirements.The roll gap model in the acceleration and deceleration process is studied to increase the thickness control precision.In order to improve model accuracy,a roll gap prediction method based on data-driven is proposed.Given the complexities of the cold rolling process,the extreme gradient boosting(XGBoost)method is used to predict the roll gap model as the rolling speed changes.Meanwhile,support vector regression and neural network-based methods are taken to evaluate and compare the prediction performances.Based on the field data,the simulation experiments are carried out.It demonstrated that the prediction performance of the proposed method outperformed the other two methods.The values of root mean square error,determination coefficient value,mean absolute percentage error and mean absolute error obtained from the XGBoost model were equal to 0.000346,0.952,7.02,and 0.00028,respectively.In addition,the proposed method analyzed the contribution rates of the rolling affecting parameters on the roll gap.The data showed that in the controllable rolling parameters,the rolling speed is the most impacting factor that disturbs the roll gap model in the acceleration and deceleration process,which can provide a useful direction for actual roll gap adjustment.
文摘Recent developments in the exploration of the universe suggest that it is in an accelerated phase of ex-pansion.Accordingly,our study aims to probe the current scenario of the universe with the aid of the reconstruction technique.The primary factor that describes cosmic evolution is the deceleration parameter.Here,we provide a physically plausible,newly defined model-independent parametric form of the deceleration parameter.Further,we constrain the free parameters through statistical MCMC analysis for different datasets,including the most recent Pantheon+.With the statistically obtained results,we analyze the dynamics of the model through the phase trans-ition,EoS parameter,and energy conditions.Also,we make use of the tool Om diagnostic to test our model.
基金supported by the Aviation Power Foundation of China(6141B09050382)。
文摘Studies show that different geometries of a Variable Cycle Engine(VCE)can be adjusted during the transient stage of the engine operation to improve the engine performance.However,this improvement increases the complexity of the acceleration and deceleration control schedule.In order to resolve this problem,the Transient-state Reverse Method(TRM)is established in the present study based on the Steady-state Reverse Method(SRM)and the Virtual Power Extraction Method(VPEM).The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE.Obtained results are compared with the conventional component-based model from different aspects,including the accuracy and the convergence rate.The TRM is then employed to optimize the control schedule of a VCE.Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model.On the other hand,it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45%and 54%,respectively.Meanwhile,the surge margin of compressors,fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria.It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.
基金the National Key Basic Research Program of China(973 Program)(No.2014CB046501)。
文摘The acceleration saltation of the traditional S-type acceleration model in the speed planning of the NURBS curve will result in the vibration and flexible impact of the machine tool.It will affect the surface quality of the components.The high speed smooth S-type acceleration and deceleration model deals with flexible impact,but the calculation is tedious.Aimed at the above problems,the traditional S-type acceleration and deceleration model is improved to make the jerk change linearly at a certain slope to reduce the flexible impact.Before the speed planning,it is needed to find the arc length and curvature of each point on the NURBS curve with a tiny step,and to determine the speed sensitivity point on the curve accordingly.According to the speed sensitive point,the NURBS curve is segmented.The attribute parameters of each section are determined by adaptive speed planning.Then,the speed planning can be performed on the NURBS curve according to the speed characteristics classification.The simulation results show that the algorithm can effectively reduce the flexible impact,improve the machining precision and efficiency,and simplify the classification of speed characteristics.