This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance compariso...This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance comparison to a predefined reference point. We find the optimal investment strategy by maximizing a weighted average utility of a concave utility and an Sshaped utility via a concavification technique and the martingale method. Numerical results are carried out to show the impact of the extent to which the manager pays attention to the change of relative performance related to the reference point on the optimal terminal relative performance.展开更多
An electrohydrodynamic （EHD） method, which is based on glow discharge plasma, is presented for flow control in an S-shaped duct. The research subject is an expanding channel with a constant width and a rectangular c...An electrohydrodynamic （EHD） method, which is based on glow discharge plasma, is presented for flow control in an S-shaped duct. The research subject is an expanding channel with a constant width and a rectangular cross section. An equivalent divergence angle and basic function are introduced to build the three-dimensional model. Subsequently, the plasma physical models are simplified as the effects of electrical body force and work （done by the force） on the fluid near the wall. With the aid of FLUENT software, the source terms of momentum and energy are added to the Navier-Stokes equation. Finally, the original performance of three models （A, B and C） is studied, in which model A demonstrates better performance. Then EHD control based on model A is discussed. The results show that the EHD method is an effective way of reducing flow loss and improving uniformity at the duct exit. The innovation in this study is the assessment of the EHD control effect on the flow in an S-shaped duct. Both the parametric modeling of the S-shaped duct and the simplified models of plasma provide valuable information for future research on aircraft inlet ducts.展开更多
Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped...Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.展开更多
Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines req...Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines requires a complete understanding of complex pillar damage mechanisms.Continuum models represent a convenient tool for analyzing this problem,but the behavior of such models is dependent of the choice of the constitutive model.In this study,a recently proposed constitutive model was used to simulate the rib fracturing process in a longwall chain pillar at West Cliff mine.After calibration,the model was able to capture the rib displacement profiles for multiple locations of the longwall face and the stress evolution 4 m into the pillar.The rib bolts in the model were found to be yielding over 60% of their length under the headgate loading condition.The model also predicted a steady damage accumulation in the rib for certain face locations,which is consistent with the description of the rib at the site.Damage was localized along the upper part of the pillar and underscored the role that the dirt band played in controlling rib deterioration at the site.The ability of the numerical model to replicate field measurements provides confidence in the capabilities of the new constitutive model.Finally,the need of using multi-point calibration is highlighted by comparing the results of the calibrated model to an alternative model calibrated to a smaller amount of data.展开更多
The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. T...The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. The s-shape is selected due to the need of reducing the overall size of the normal monopole antenna. The printed antenna was designed with an approximate overall size of 39 × 56 mm2 of which the antenna’s upper side is 26 × 39 mm2 while its reference ground board was sized at 39 × 30 mm2. The antenna is fed by a strip line of 3 × 1.5 mm2, in series with a 4.4 pF capacitance and shunt with an 8.7 nH inductance for purpose of antenna’s impedance matching with the input. A couple of existing publications showed that PCB antenna is not a new technology;however not an old technology for telecommunication industry. The raised problem by this work was duly solved with HFSS as a tool;excellent results are presented. After duly matching the antenna’s impedance with 50 Ω microstrip feed-line, solutions for overall performance were analyzed and demonstrated optimal: radiation patterns were proven omnidirectional, antenna gain optimized. The present antenna prototype’s overall dimensions can be readjusted according to any industrial and manufacturing requests.展开更多
This paper illustrates a simple kind of tri-band printed G-shaped monopole antenna for Multiple-Input-Multiple-Output (MIMO) systems. The proposed antenna is used to achieve three operating frequencies, 2.45 GHz, 5.2 ...This paper illustrates a simple kind of tri-band printed G-shaped monopole antenna for Multiple-Input-Multiple-Output (MIMO) systems. The proposed antenna is used to achieve three operating frequencies, 2.45 GHz, 5.2 GHz and 8.2 GHz for wireless communications. To improve the isolation between the two radiating elements, we use left-handed materials composed of only S-shaped resonators to get negative refractive index at the three operating frequencies. When one layer of S-shaped resonators is employed, the antenna correlation, the diversity gain and the bandwidth are also enhanced. The simulated results are presented and evaluated with and without left-handed materials.展开更多
Aim: the aim of this study was to investigate the shaping ability of thermomechanically treated files manufactured by twisting(Twisted files)and compare it to conventional rotary system (K3, Sybron Endo, Orange, CA) i...Aim: the aim of this study was to investigate the shaping ability of thermomechanically treated files manufactured by twisting(Twisted files)and compare it to conventional rotary system (K3, Sybron Endo, Orange, CA) in S-shaped canals, including formation of ledges, zipping, elbow, outer widening, danger zone, perforation and file deformation. Materials & Methods: Forty S-Shaped canals in resin blocks were randomly divided into 2 groups of 20 each. Pre-instrumentation images of the canals were taken via a digital camera and superimposed on images taken after preparation with TF and K3 systems to apical size of 25/06 and 30/06. Canal aberrations were measured from the superimposed image at five levels using AutoCAD system. Fisher exact test and Mann Whitney test were used for analysis of the data. Results: the incidence of zipping, elbow and apical transportation was significantly lower in the TF group (P = 0.04). Generally the incidence of aberration increased when the apical size increased to 30/0.06 regardless of the file system. Significant file deformation was evident in the TF after single use (P ? 0.001). Conclusion: Under the conditions of this study, TF manufactured by new technique performed better than K3 systems when used up to size 25/06 in simulated S-shaped canals. Clinical significance: The flexibility of thermomechanically treated files is beneficial in canals with multiple curvatures;however, attention should be paid to the instrument taper and final apical size of the preparation.展开更多
Amorphous–microcrystalline MoS_(2)thin films are fabricated using the sol-gel method to produce MoS_(2)/Si-based solar cells. The generation mechanisms of the S-shaped current density–voltage(J–V) curves of the sol...Amorphous–microcrystalline MoS_(2)thin films are fabricated using the sol-gel method to produce MoS_(2)/Si-based solar cells. The generation mechanisms of the S-shaped current density–voltage(J–V) curves of the solar cells are analyzed. To improve the performance of the solar cells and address the problem of the S-shaped J–V curve, a MoS_(2)film and a p^(+) layer are introduced into the front and back interfaces of the solar cell, respectively, which leads to the formation of a p–n junction between the p-Si and the MoS_(2)film as well as ohmic contacts between the MoS_(2)film and the ITO, improving the S-shaped J–V curve. As a result of the high doping characteristics and the high work function of the p^(+) layer, a high–low junction is formed between the p;and p layers along with ohmic contacts between the p;layer and the Ag electrode. Consequently,the S-shaped J–V curve is eliminated, and a significantly higher current density is achieved at a high voltage. The device exhibits ideal p–n junction rectification characteristics and achieves a high power-conversion efficiency(CE) of 7.55%. The findings of this study may improve the application of MoS_(2)thin films in silicon-based solar cells, which are expected to be widely used in various silicon-based electronic and optical devices.展开更多
The spatial form of urbanization in China has developed from single-core city expansion to a multi-center metropolitan area.However,little attention has been paid to the growth process of the emerging metropolitan are...The spatial form of urbanization in China has developed from single-core city expansion to a multi-center metropolitan area.However,little attention has been paid to the growth process of the emerging metropolitan area situated in major grain producing locations in the central China.Taking the Zhengzhou metropolitan area(ZZMA)as a case study,we developed an inverse S-shape model to characterize the spatial distribution of urban land density,and constructed an urban expansion core index,urban expansion intensity index,and urban compactness index to quantify the spatial structure change that has taken place from 1978 to 2017 during the process of urban expansion.Moreover,cropland contribution rate(CR)was constructed to evaluate the impacts of urban expansion on croplands.We uncovered four key findings.First,over the past 40 yr,the ZZMA has experienced dramatic expansion,and the central city of Zhengzhou expanded faster than other cities.The gravity centers of urban expansion of surrounding cities were moving toward to Zhengzhou City.Second,the urban land density decreased with the distance from the city center to the outskirts.As the only large city,Zhengzhou has experienced the fastest and most compact centralized urban expansion,especially after 2000,while other medium-and small-sized cities have experienced low-intensity decentralized expansion.Third,the urban core has been gradually expanding outward.From 1978 to 2017,the hot-zone of urban growth has moved progressively with the acceleration of urbanization.All cities except Jiaozuo had a single peak in different periods.Forth,the cities in national core grain-producing areas has higher cropland contribution rates and lower urban expansion areas,which was closely related to cropland protection.Further analysis showed that large city was relatively better positioned than smaller cities in the efficiency of their urban infrastructure and the effectiveness of wealth creation efficiency in the urbanized area could be tested in all cities,and the policy factor seemed to play an important role in the urban expansion process.展开更多
基金Supported by the National Natural Science Foundation of China(12071335)the Humanities and Social Science Research Projects in Ministry of Education(20YJAZH025).
文摘This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance comparison to a predefined reference point. We find the optimal investment strategy by maximizing a weighted average utility of a concave utility and an Sshaped utility via a concavification technique and the martingale method. Numerical results are carried out to show the impact of the extent to which the manager pays attention to the change of relative performance related to the reference point on the optimal terminal relative performance.
文摘An electrohydrodynamic （EHD） method, which is based on glow discharge plasma, is presented for flow control in an S-shaped duct. The research subject is an expanding channel with a constant width and a rectangular cross section. An equivalent divergence angle and basic function are introduced to build the three-dimensional model. Subsequently, the plasma physical models are simplified as the effects of electrical body force and work （done by the force） on the fluid near the wall. With the aid of FLUENT software, the source terms of momentum and energy are added to the Navier-Stokes equation. Finally, the original performance of three models （A, B and C） is studied, in which model A demonstrates better performance. Then EHD control based on model A is discussed. The results show that the EHD method is an effective way of reducing flow loss and improving uniformity at the duct exit. The innovation in this study is the assessment of the EHD control effect on the flow in an S-shaped duct. Both the parametric modeling of the S-shaped duct and the simplified models of plasma provide valuable information for future research on aircraft inlet ducts.
基金supported by the Pre-research Foundation of CPLA General Equipment Department
文摘Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.
基金funded by the National Institute for Occupational Safety and Health(NIOSH)(Grant No.200-2016-90154)sponsored by the Alpha Foundation for the Improvement of Mine Safety and Health,Inc.(ALPHA FOUNDATION)。
文摘Spalling of pillar ribs has been a major hazard in the mining industry for decades.In the absence of rib support guidelines,accidents have continued to occur in recent years.Developing effective support guidelines requires a complete understanding of complex pillar damage mechanisms.Continuum models represent a convenient tool for analyzing this problem,but the behavior of such models is dependent of the choice of the constitutive model.In this study,a recently proposed constitutive model was used to simulate the rib fracturing process in a longwall chain pillar at West Cliff mine.After calibration,the model was able to capture the rib displacement profiles for multiple locations of the longwall face and the stress evolution 4 m into the pillar.The rib bolts in the model were found to be yielding over 60% of their length under the headgate loading condition.The model also predicted a steady damage accumulation in the rib for certain face locations,which is consistent with the description of the rib at the site.Damage was localized along the upper part of the pillar and underscored the role that the dirt band played in controlling rib deterioration at the site.The ability of the numerical model to replicate field measurements provides confidence in the capabilities of the new constitutive model.Finally,the need of using multi-point calibration is highlighted by comparing the results of the calibrated model to an alternative model calibrated to a smaller amount of data.
文摘The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. The s-shape is selected due to the need of reducing the overall size of the normal monopole antenna. The printed antenna was designed with an approximate overall size of 39 × 56 mm2 of which the antenna’s upper side is 26 × 39 mm2 while its reference ground board was sized at 39 × 30 mm2. The antenna is fed by a strip line of 3 × 1.5 mm2, in series with a 4.4 pF capacitance and shunt with an 8.7 nH inductance for purpose of antenna’s impedance matching with the input. A couple of existing publications showed that PCB antenna is not a new technology;however not an old technology for telecommunication industry. The raised problem by this work was duly solved with HFSS as a tool;excellent results are presented. After duly matching the antenna’s impedance with 50 Ω microstrip feed-line, solutions for overall performance were analyzed and demonstrated optimal: radiation patterns were proven omnidirectional, antenna gain optimized. The present antenna prototype’s overall dimensions can be readjusted according to any industrial and manufacturing requests.
文摘This paper illustrates a simple kind of tri-band printed G-shaped monopole antenna for Multiple-Input-Multiple-Output (MIMO) systems. The proposed antenna is used to achieve three operating frequencies, 2.45 GHz, 5.2 GHz and 8.2 GHz for wireless communications. To improve the isolation between the two radiating elements, we use left-handed materials composed of only S-shaped resonators to get negative refractive index at the three operating frequencies. When one layer of S-shaped resonators is employed, the antenna correlation, the diversity gain and the bandwidth are also enhanced. The simulated results are presented and evaluated with and without left-handed materials.
文摘Aim: the aim of this study was to investigate the shaping ability of thermomechanically treated files manufactured by twisting(Twisted files)and compare it to conventional rotary system (K3, Sybron Endo, Orange, CA) in S-shaped canals, including formation of ledges, zipping, elbow, outer widening, danger zone, perforation and file deformation. Materials & Methods: Forty S-Shaped canals in resin blocks were randomly divided into 2 groups of 20 each. Pre-instrumentation images of the canals were taken via a digital camera and superimposed on images taken after preparation with TF and K3 systems to apical size of 25/06 and 30/06. Canal aberrations were measured from the superimposed image at five levels using AutoCAD system. Fisher exact test and Mann Whitney test were used for analysis of the data. Results: the incidence of zipping, elbow and apical transportation was significantly lower in the TF group (P = 0.04). Generally the incidence of aberration increased when the apical size increased to 30/0.06 regardless of the file system. Significant file deformation was evident in the TF after single use (P ? 0.001). Conclusion: Under the conditions of this study, TF manufactured by new technique performed better than K3 systems when used up to size 25/06 in simulated S-shaped canals. Clinical significance: The flexibility of thermomechanically treated files is beneficial in canals with multiple curvatures;however, attention should be paid to the instrument taper and final apical size of the preparation.
基金Project supported by the Science and Technology Research Project of Hebei Province Colleges and Universities (Grant No. QN2020113)Tangshan Applied Basic Research Project (Grant No. 19130227g)。
文摘Amorphous–microcrystalline MoS_(2)thin films are fabricated using the sol-gel method to produce MoS_(2)/Si-based solar cells. The generation mechanisms of the S-shaped current density–voltage(J–V) curves of the solar cells are analyzed. To improve the performance of the solar cells and address the problem of the S-shaped J–V curve, a MoS_(2)film and a p^(+) layer are introduced into the front and back interfaces of the solar cell, respectively, which leads to the formation of a p–n junction between the p-Si and the MoS_(2)film as well as ohmic contacts between the MoS_(2)film and the ITO, improving the S-shaped J–V curve. As a result of the high doping characteristics and the high work function of the p^(+) layer, a high–low junction is formed between the p;and p layers along with ohmic contacts between the p;layer and the Ag electrode. Consequently,the S-shaped J–V curve is eliminated, and a significantly higher current density is achieved at a high voltage. The device exhibits ideal p–n junction rectification characteristics and achieves a high power-conversion efficiency(CE) of 7.55%. The findings of this study may improve the application of MoS_(2)thin films in silicon-based solar cells, which are expected to be widely used in various silicon-based electronic and optical devices.
基金Under the auspices of National Natural Science Foundation of China(No.41971274)the Innovation Research Team of Henan Provincial University(No.2021-CXTD-08,2022-CXTD-02)the Scientific and Technological Innovation Team of Universities in Henan Province(No.22IRTSTHN008)。
文摘The spatial form of urbanization in China has developed from single-core city expansion to a multi-center metropolitan area.However,little attention has been paid to the growth process of the emerging metropolitan area situated in major grain producing locations in the central China.Taking the Zhengzhou metropolitan area(ZZMA)as a case study,we developed an inverse S-shape model to characterize the spatial distribution of urban land density,and constructed an urban expansion core index,urban expansion intensity index,and urban compactness index to quantify the spatial structure change that has taken place from 1978 to 2017 during the process of urban expansion.Moreover,cropland contribution rate(CR)was constructed to evaluate the impacts of urban expansion on croplands.We uncovered four key findings.First,over the past 40 yr,the ZZMA has experienced dramatic expansion,and the central city of Zhengzhou expanded faster than other cities.The gravity centers of urban expansion of surrounding cities were moving toward to Zhengzhou City.Second,the urban land density decreased with the distance from the city center to the outskirts.As the only large city,Zhengzhou has experienced the fastest and most compact centralized urban expansion,especially after 2000,while other medium-and small-sized cities have experienced low-intensity decentralized expansion.Third,the urban core has been gradually expanding outward.From 1978 to 2017,the hot-zone of urban growth has moved progressively with the acceleration of urbanization.All cities except Jiaozuo had a single peak in different periods.Forth,the cities in national core grain-producing areas has higher cropland contribution rates and lower urban expansion areas,which was closely related to cropland protection.Further analysis showed that large city was relatively better positioned than smaller cities in the efficiency of their urban infrastructure and the effectiveness of wealth creation efficiency in the urbanized area could be tested in all cities,and the policy factor seemed to play an important role in the urban expansion process.
