Various metal-modified ZSM-5 zeolite adsorbents prepared by the impregnation method were applied to the removal of organic chlorides from model naphtha.The adsorption performance and regeneration stability were invest...Various metal-modified ZSM-5 zeolite adsorbents prepared by the impregnation method were applied to the removal of organic chlorides from model naphtha.The adsorption performance and regeneration stability were investigated by static adsorption experiments.The morphologies,structural features,and physicochemical properties of the adsorbents were characterized by X-ray diffraction,Brunauer-Emmett-Teller analysis,NH3 temperature-programmed desorption,scanning electron microscopy,transmission electron microscopy,and pyridine adsorption infrared spectroscopy.The Mg/ZSM-5 zeolite adsorbent possessed a relatively high specific surface area and good metal dispersion and exhibited the best dechlorination and regeneration performance.The characterization results revealed that introduction of the metal exerted a significant influence on the acidic properties of the catalyst surface.A decrease in the ratio of Brønsted acidic sites to Lewis acidic sites and an increase in the amount of moderately acidic sites were confirmed to be responsible for the excellent adsorption performance of the Mg-modified ZSM-5 zeolite.Furthermore,the Langmuir adsorption isotherm model was applied to study the adsorption equilibrium and thermodynamics of the Mg/ZSM-5 adsorbent under mild conditions.The results revealed that the removal of 1,2-dichloroethane by the Mg/ZSM-5 adsorbent was endothermic,spontaneous,disordered,and primarily involved physical adsorption.展开更多
The effects of rare earth(RE)on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE(RE=La,Ce,Pr,Nd,Sm,Eu or Gd),were prepared by ...The effects of rare earth(RE)on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE(RE=La,Ce,Pr,Nd,Sm,Eu or Gd),were prepared by the impregnation of the ZSM-5 type zeolites(Si/Al=64:1)with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B(Lewis acid/Brnsted acid),but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.展开更多
Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of...Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species([GaO;]a) that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface([GaO;];), which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples(Gax-NZ5) exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield(i.e.,65.4 wt%) was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.展开更多
The adsorption behavior of benzene and propylene in zeolite ZSM-5 was studied by Grand Canonical Monte Carlo(GCMC) simulations. It could be found that benzene and propylene molecules showed different adsorption beha...The adsorption behavior of benzene and propylene in zeolite ZSM-5 was studied by Grand Canonical Monte Carlo(GCMC) simulations. It could be found that benzene and propylene molecules showed different adsorption behavior in the zeolite cavities. The loadings of propylene were significantly larger than those of benzene at 100 kPa. From the figures of potential energy distribution, the potential energy of benzene/zeolite was more negative than that of propylene/zeolite, so benzene could be adsorbed more stably than propylene. When the temperature was in- creased from 298 to 443 K at 100 kPa, the loading ofpropylene was reduced from 99 to 82 molecules, whereas that of benzene changed little. When benzene and propylene were adsorbed in zeolite simultaneously, the competitive adsorption of them occurred; therefore, the potential energy distribution could be changed significantly. Besides, the adsorption isotherms of benzene and propylene in ZSM-5 at 298 and 443 K were simulated. The results exhibit that the different factors influenced the molecular adsorption at various temperatures and pressures, leading to the diffe- rent rules for the adsorption of benzene and propylene molecules in the zeolite. At a low pressure, the unfavorable energy of propylene/zeolite and the "commensurate freezing" phenomenon of benzene would make the loadings of itself higher than those of propylene. When pressure was higher than 5 kPa, the adsorption of benzene in ZSM-5 would nearly reach saturation.展开更多
The most prestigious catalyst applied in natural gas (methane) non-oxidative conversion to petrochemicals is 6%Mo/H-ZSM-5. Chromium, molybdenum and tungsten are the group VI metals. Hence, in this work, 6%Mo/H-ZSM-5...The most prestigious catalyst applied in natural gas (methane) non-oxidative conversion to petrochemicals is 6%Mo/H-ZSM-5. Chromium, molybdenum and tungsten are the group VI metals. Hence, in this work, 6%Mo/H-ZSM-5 was correlated with 3%Cr+3%Mo/H-ZSM-5 and 3%W+3%Mo/H-ZSM-5 as catalysts to examine their promoting or inhibiting effects on the various reactions taking place during methane conversion. The catalytic activities of these catalysts were tested in a continuous flow fixed bed reactor at 700℃ and a GHSV of 1500 ml·g^-1·h^-1 Characterization of the catalysts using XRD, TGA and TPD were investigated. XRD and NH3-TPD showed greater interaction between the W-phase and the Bronsted acid sites in the channels of the zeolite than between Cr-phase and the acid sites in the zeolite.展开更多
The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total ...The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.展开更多
Template-free nanosized ZSM-5 seeds with an average size of 15 nm were prepared from a synthesis solution with the composition 12Na2O∶100SiO2∶2Al2O3∶2500H2O. By the use of these seeds, thin ZSM-5 zeolite membranes ...Template-free nanosized ZSM-5 seeds with an average size of 15 nm were prepared from a synthesis solution with the composition 12Na2O∶100SiO2∶2Al2O3∶2500H2O. By the use of these seeds, thin ZSM-5 zeolite membranes were prepared on the outer surface of a porous α-alumina tube with a pore size of 2 μm in a gel system by varying-concentration synthesis with organic-free template. The first composition synthesis sol-gel was the same as seeds of molar composition and the second one was 12Na2O∶100SiO2∶2Al2O3∶5000H2O at 180 ℃ for 10 h, respectively. XRD shows that the film consists of well-crystallized ZSM-5 zeolite. SEM investigation indicats that the zeolite films on the supports are defect free and the film thickness is approximately 8 μm. The permeances for H2, N2, CH4 and CO2 are 8.94×10-7, 3.27×10-7, 3.9×10-7, 3.14×10-7 and 0.874×10-7 mol·m2·s-1·Pa-1, respectively. The ideal selectivity of membrane at room temperature for H2/CO2, H2/N2, H2/CH4 are 2.84, 2.73 and 2.29, respectively.展开更多
Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject...Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject to the rapid deactivation due to coke deposition.Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process,compared to that by air regeneration.A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work.In doing so,we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure,acidity,residual coke properties and other structural parameters.The results show that with the increase of regeneration temperature,the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene,which are normally considered as active hydrocarbon pool species in MTO reaction.However,when the regeneration temperature is too high,nitrogen oxides can be found in the residual coke.Meanwhile,as the regeneration temperature increases,the quantity of residual coke reduces and the acidity,BET surface area and pore structure of the regenerated samples can be better recovered,resulting in prolonging catalyst lifetime.We have further derived the kinetics of steam regeneration,and obtained an activation energy of about 177.8 kJ·mol^(-1).Compared that with air regeneration,the activation energy of steam regeneration is higher,indicating that the steam regeneration process is more difficult to occur.展开更多
A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystalli...A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystallization followed by protonation and Pt-loading. The product formed had a spherical morphology with bicontinuous lamellar with a diameter in the range of 500-700 nm. The catalytic activity of the Pt/HSi@Y has been assessed based on light linear alkane (C5-C7) isomerization in a micro-catalytic pulse reactor at 423-623 K. A pyridine IR study confirmed that the introduction of fibrous silica on Y zeolite increased the Lewis acid sites corresponding with the formation of extra-framework Al which led to the generation of more protonic acid sites. A hydrogen adsorbed IR study showed that the protonic acid sites which act as active sites in the isomerization were formed via dissociative-adsorption of molecular hydrogen releasing electrons to the nearby Lewis acid sites. Thus, it is suggested that the presence of Pt and HSi@Y with a high number of Lewis acid as well as weak Bronsted acid sites improved the activity and stability in C5, C6 and C7 isomerization via hydrogen spill-over mechanism.展开更多
The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment(combined alkali treatment and acid leaching) of parent zeolite and its catalytic performance for benzene alky...The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment(combined alkali treatment and acid leaching) of parent zeolite and its catalytic performance for benzene alkylation with methanol was investigated. The effect of post-treatment on the textural properties was characterized by various techniques(including ICP-AES, XRD, nitrogen sorption isotherms, SEM, NH3-TPD, Py-IR and TG). The results indicated that the post-treatment could modify the structural and acidic properties of HZSM-5 zeolite. In this procedure, not only additional mesopores were created by selective extraction of silicon but also the acidity was tuned. Consequently, the modified HZSM-5 zeolite showed larger external surface area with less acid sites as compared to the parent zeolite. It was found out that the modified zeolite exhibited a higher benzene conversion and xylene selectivity for alkylation of benzene with methanol as well as excellent life span of the catalyst than conventional ones. This can be explained by the facts that the presence of additional mesopores improved the diffusion property in the reactions. Furthermore, the modified zeolite showed an appropriate Br?nsted acidity for effective suppression of the side reaction of methanol to olefins, thus reduced the accumulation of coke on the HZSM-5 zeolite, which was favorable for the catalyst stability. In comparison with the parent HZSM-5 zeolite,the modified zeolite by alkali treatment and acid leaching showed better performance for the benzene alkylation with methanol.展开更多
Binderless zeolite is considered to be a potential alternative for binder-containing zeolite in the industrial applications of adsorptive separation process. Synthesized binderless zeolite and commercial binder-contai...Binderless zeolite is considered to be a potential alternative for binder-containing zeolite in the industrial applications of adsorptive separation process. Synthesized binderless zeolite and commercial binder-containing product were used in adsorptive separation of n-paraffins from a model oil, with their performance compared. It is indicated that the binderless zeolite exhibits by 25%-35% higher in saturated adsorption capacity and by 115%-130% more adsorption amount at the breakthrough point with much shorter length of mass-transfer zone. Adsorptive separation of n-paraffins from naphtha was carried out in a fixed-bed adsorber containing the synthesized binderless zeolite 5 A under the operating conditions covering a feed space velocity of 90 h-1 and an adsorption temperature of 573 K. As compared to original naphtha, the raffinate shows by 34 units more in research octane number and by around 10% more of potential aromatic content, while the desorption oil exhibits by 13.3% more ethylene yield and by 11.7% higher in total olefins yield.展开更多
基金This work was financially supported by the Natural Science Foundation of Shandong Province(ZR2021MB134 and ZR2022MB019)the National Natural Science Foundation of China(22008131)+1 种基金the Talent Fund for Province and Ministry Co-construction Collaborative Innovation Center of Eco-chemical Engineering(STHGYX2220)the Opening Fund of State Key Laboratory of Heavy Oil Processing(SKLOP202002002).
文摘Various metal-modified ZSM-5 zeolite adsorbents prepared by the impregnation method were applied to the removal of organic chlorides from model naphtha.The adsorption performance and regeneration stability were investigated by static adsorption experiments.The morphologies,structural features,and physicochemical properties of the adsorbents were characterized by X-ray diffraction,Brunauer-Emmett-Teller analysis,NH3 temperature-programmed desorption,scanning electron microscopy,transmission electron microscopy,and pyridine adsorption infrared spectroscopy.The Mg/ZSM-5 zeolite adsorbent possessed a relatively high specific surface area and good metal dispersion and exhibited the best dechlorination and regeneration performance.The characterization results revealed that introduction of the metal exerted a significant influence on the acidic properties of the catalyst surface.A decrease in the ratio of Brønsted acidic sites to Lewis acidic sites and an increase in the amount of moderately acidic sites were confirmed to be responsible for the excellent adsorption performance of the Mg-modified ZSM-5 zeolite.Furthermore,the Langmuir adsorption isotherm model was applied to study the adsorption equilibrium and thermodynamics of the Mg/ZSM-5 adsorbent under mild conditions.The results revealed that the removal of 1,2-dichloroethane by the Mg/ZSM-5 adsorbent was endothermic,spontaneous,disordered,and primarily involved physical adsorption.
基金Project supported by the National Basic Research Program of China(2004CB2178062005CB221402)+1 种基金the National NaturalScience Foundation of China(20373043)Young Scientists Innovation Foundation of CNPC(04E7025)
文摘The effects of rare earth(RE)on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE(RE=La,Ce,Pr,Nd,Sm,Eu or Gd),were prepared by the impregnation of the ZSM-5 type zeolites(Si/Al=64:1)with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B(Lewis acid/Brnsted acid),but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.
基金supported by the National Natural Science Foundation of China(Nos.21276067 and 21676074)Programs of International S&T cooperation(No.2014DFR41110)
文摘Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species([GaO;]a) that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface([GaO;];), which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples(Gax-NZ5) exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield(i.e.,65.4 wt%) was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.
基金Supported by the National Natural Science Foundation of China(Nos.20576012 and 20625621)
文摘The adsorption behavior of benzene and propylene in zeolite ZSM-5 was studied by Grand Canonical Monte Carlo(GCMC) simulations. It could be found that benzene and propylene molecules showed different adsorption behavior in the zeolite cavities. The loadings of propylene were significantly larger than those of benzene at 100 kPa. From the figures of potential energy distribution, the potential energy of benzene/zeolite was more negative than that of propylene/zeolite, so benzene could be adsorbed more stably than propylene. When the temperature was in- creased from 298 to 443 K at 100 kPa, the loading ofpropylene was reduced from 99 to 82 molecules, whereas that of benzene changed little. When benzene and propylene were adsorbed in zeolite simultaneously, the competitive adsorption of them occurred; therefore, the potential energy distribution could be changed significantly. Besides, the adsorption isotherms of benzene and propylene in ZSM-5 at 298 and 443 K were simulated. The results exhibit that the different factors influenced the molecular adsorption at various temperatures and pressures, leading to the diffe- rent rules for the adsorption of benzene and propylene molecules in the zeolite. At a low pressure, the unfavorable energy of propylene/zeolite and the "commensurate freezing" phenomenon of benzene would make the loadings of itself higher than those of propylene. When pressure was higher than 5 kPa, the adsorption of benzene in ZSM-5 would nearly reach saturation.
文摘The most prestigious catalyst applied in natural gas (methane) non-oxidative conversion to petrochemicals is 6%Mo/H-ZSM-5. Chromium, molybdenum and tungsten are the group VI metals. Hence, in this work, 6%Mo/H-ZSM-5 was correlated with 3%Cr+3%Mo/H-ZSM-5 and 3%W+3%Mo/H-ZSM-5 as catalysts to examine their promoting or inhibiting effects on the various reactions taking place during methane conversion. The catalytic activities of these catalysts were tested in a continuous flow fixed bed reactor at 700℃ and a GHSV of 1500 ml·g^-1·h^-1 Characterization of the catalysts using XRD, TGA and TPD were investigated. XRD and NH3-TPD showed greater interaction between the W-phase and the Bronsted acid sites in the channels of the zeolite than between Cr-phase and the acid sites in the zeolite.
基金The authors would like to thank the financial support from the National Basic Research Program of China fgrant No.2004CB 217806)the National Natural Science Foundation of China (Grant No.20373043) the Scientific Research Key Foundation for the Returned Overseas Chinese Scholars of State Education Ministry.
文摘The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.
基金This work was financially supported by the Specialized Research Fund for the Doctoral Program of High Education (SRFDP)(No.B20020288015).
文摘Template-free nanosized ZSM-5 seeds with an average size of 15 nm were prepared from a synthesis solution with the composition 12Na2O∶100SiO2∶2Al2O3∶2500H2O. By the use of these seeds, thin ZSM-5 zeolite membranes were prepared on the outer surface of a porous α-alumina tube with a pore size of 2 μm in a gel system by varying-concentration synthesis with organic-free template. The first composition synthesis sol-gel was the same as seeds of molar composition and the second one was 12Na2O∶100SiO2∶2Al2O3∶5000H2O at 180 ℃ for 10 h, respectively. XRD shows that the film consists of well-crystallized ZSM-5 zeolite. SEM investigation indicats that the zeolite films on the supports are defect free and the film thickness is approximately 8 μm. The permeances for H2, N2, CH4 and CO2 are 8.94×10-7, 3.27×10-7, 3.9×10-7, 3.14×10-7 and 0.874×10-7 mol·m2·s-1·Pa-1, respectively. The ideal selectivity of membrane at room temperature for H2/CO2, H2/N2, H2/CH4 are 2.84, 2.73 and 2.29, respectively.
基金the National Natural Science Foundation of China(91834302)。
文摘Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject to the rapid deactivation due to coke deposition.Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process,compared to that by air regeneration.A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work.In doing so,we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure,acidity,residual coke properties and other structural parameters.The results show that with the increase of regeneration temperature,the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene,which are normally considered as active hydrocarbon pool species in MTO reaction.However,when the regeneration temperature is too high,nitrogen oxides can be found in the residual coke.Meanwhile,as the regeneration temperature increases,the quantity of residual coke reduces and the acidity,BET surface area and pore structure of the regenerated samples can be better recovered,resulting in prolonging catalyst lifetime.We have further derived the kinetics of steam regeneration,and obtained an activation energy of about 177.8 kJ·mol^(-1).Compared that with air regeneration,the activation energy of steam regeneration is higher,indicating that the steam regeneration process is more difficult to occur.
基金supported by the Universiti Teknologi Malaysia through Research University Grant No. 13H61 and 19H04
文摘A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystallization followed by protonation and Pt-loading. The product formed had a spherical morphology with bicontinuous lamellar with a diameter in the range of 500-700 nm. The catalytic activity of the Pt/HSi@Y has been assessed based on light linear alkane (C5-C7) isomerization in a micro-catalytic pulse reactor at 423-623 K. A pyridine IR study confirmed that the introduction of fibrous silica on Y zeolite increased the Lewis acid sites corresponding with the formation of extra-framework Al which led to the generation of more protonic acid sites. A hydrogen adsorbed IR study showed that the protonic acid sites which act as active sites in the isomerization were formed via dissociative-adsorption of molecular hydrogen releasing electrons to the nearby Lewis acid sites. Thus, it is suggested that the presence of Pt and HSi@Y with a high number of Lewis acid as well as weak Bronsted acid sites improved the activity and stability in C5, C6 and C7 isomerization via hydrogen spill-over mechanism.
基金Supported by the National Natural Science Foundation of China(NSFC-21476207 and NSFC-21506189)the National Basic Research Program of China(973 Program)(2011CB710800)
文摘The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment(combined alkali treatment and acid leaching) of parent zeolite and its catalytic performance for benzene alkylation with methanol was investigated. The effect of post-treatment on the textural properties was characterized by various techniques(including ICP-AES, XRD, nitrogen sorption isotherms, SEM, NH3-TPD, Py-IR and TG). The results indicated that the post-treatment could modify the structural and acidic properties of HZSM-5 zeolite. In this procedure, not only additional mesopores were created by selective extraction of silicon but also the acidity was tuned. Consequently, the modified HZSM-5 zeolite showed larger external surface area with less acid sites as compared to the parent zeolite. It was found out that the modified zeolite exhibited a higher benzene conversion and xylene selectivity for alkylation of benzene with methanol as well as excellent life span of the catalyst than conventional ones. This can be explained by the facts that the presence of additional mesopores improved the diffusion property in the reactions. Furthermore, the modified zeolite showed an appropriate Br?nsted acidity for effective suppression of the side reaction of methanol to olefins, thus reduced the accumulation of coke on the HZSM-5 zeolite, which was favorable for the catalyst stability. In comparison with the parent HZSM-5 zeolite,the modified zeolite by alkali treatment and acid leaching showed better performance for the benzene alkylation with methanol.
基金the National Key Project for Basic Research of China(973 Project)(No.2005CB221403)the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant:DICP K2007D3)
基金financially supported by the Natural Science Foundation of Shanghai(Grant 16ZR1408100)the National Natural Science Foundation of China(Grant 91634112 and 21878097)the Open Project of State Key Laboratory of Chemical Engineering(SKL-ChE-16C01)
文摘Binderless zeolite is considered to be a potential alternative for binder-containing zeolite in the industrial applications of adsorptive separation process. Synthesized binderless zeolite and commercial binder-containing product were used in adsorptive separation of n-paraffins from a model oil, with their performance compared. It is indicated that the binderless zeolite exhibits by 25%-35% higher in saturated adsorption capacity and by 115%-130% more adsorption amount at the breakthrough point with much shorter length of mass-transfer zone. Adsorptive separation of n-paraffins from naphtha was carried out in a fixed-bed adsorber containing the synthesized binderless zeolite 5 A under the operating conditions covering a feed space velocity of 90 h-1 and an adsorption temperature of 573 K. As compared to original naphtha, the raffinate shows by 34 units more in research octane number and by around 10% more of potential aromatic content, while the desorption oil exhibits by 13.3% more ethylene yield and by 11.7% higher in total olefins yield.
基金Supported by the Key Natural Science Foundation for Universities of Jiangsu Province(06KJA53012) the National Natural Science Foundation of China(20776069 20976084)
文摘为甲苯的 disproportionation 的形状选择的催化剂被塑造柱体的 ZSM-5 沸石 extrudates 的修正与 TEOS (tetraethyl orthosilicate ) 与化学液体免职准备。为准备催化剂的各种各样的参数被改变调查合适的条件。产生催化剂在一个迫使的固定的床反应堆被测试并且由 SEM (扫描电子显微镜学) 描绘了。甲苯和帕拉二甲苯选择的变换被免职代理人,酸和溶剂的 ZSM-5 沸石,类型和数量的 /n (Al2O3 ) 比率使用了的 n (SiO2 ) 显著地影响,并且免职处理的时间和周期。当免职数量是低的时, TEOS 被证明比常规 polysiloxanes 是一个更有效的代理人。以合适的条件准备的催化剂与 25.6% 的可观的高变换展出了 91.1% 的一种高帕拉二甲苯选择。SEM 分析在 ZSM-5 zeolie 晶体的外部表面上证实了非结晶的硅石的层的形成,它为高度提高的形状选择负责。