A new method has been developed for fabrication of copper micro-pattern by selective chemical copper deposition based on photolithographed (3-mercaptopropyl)-trimethoxysilane (MPTS) self-assembly monolayers (SAMs). A...A new method has been developed for fabrication of copper micro-pattern by selective chemical copper deposition based on photolithographed (3-mercaptopropyl)-trimethoxysilane (MPTS) self-assembly monolayers (SAMs). As confirmed by scanning electron microscopy (SEM), Cu closely replicated the mask features. The present approach makes this technic to be cheap and may be applicable to assembly of microelectronic circuits.展开更多
The high temperature superconductor of CuBa2Ca2Cu3O8+δ(Cu-1223) was synthesized experimentally by solid-state reaction. There were many pa-rameters affecting the preparation technique such as oxygen flow, si...The high temperature superconductor of CuBa2Ca2Cu3O8+δ(Cu-1223) was synthesized experimentally by solid-state reaction. There were many pa-rameters affecting the preparation technique such as oxygen flow, sintering temperature, sintering time, and compacted pressure. The XRD-pattern exhibited a tetragonal phase for both Cu-1223, and Cu-1212. The resistivity measurement was considered the important experiment to show the predominant phase of superconductor if it was a high phase or low phase. The critical temperature (Tc) was about (128 K) for the high phase of Cu-1223, whereas the low phase of (Cu-1212) appeared at (Tc = 64 K). The correlation between the Miller indices and resistivity measurements was a good tool to predicate the expected mechanism of conductivity within the unit cell. It was clear that the arrangement of these planes was aligned in the a-c direction. That should make the motion of the charge to be simpler by a stepping plane toward c-axis.展开更多
基金This work was supported by the National Natural Science Foundation of the Peoples Republic of China (No. 69890220).
文摘A new method has been developed for fabrication of copper micro-pattern by selective chemical copper deposition based on photolithographed (3-mercaptopropyl)-trimethoxysilane (MPTS) self-assembly monolayers (SAMs). As confirmed by scanning electron microscopy (SEM), Cu closely replicated the mask features. The present approach makes this technic to be cheap and may be applicable to assembly of microelectronic circuits.
文摘The high temperature superconductor of CuBa2Ca2Cu3O8+δ(Cu-1223) was synthesized experimentally by solid-state reaction. There were many pa-rameters affecting the preparation technique such as oxygen flow, sintering temperature, sintering time, and compacted pressure. The XRD-pattern exhibited a tetragonal phase for both Cu-1223, and Cu-1212. The resistivity measurement was considered the important experiment to show the predominant phase of superconductor if it was a high phase or low phase. The critical temperature (Tc) was about (128 K) for the high phase of Cu-1223, whereas the low phase of (Cu-1212) appeared at (Tc = 64 K). The correlation between the Miller indices and resistivity measurements was a good tool to predicate the expected mechanism of conductivity within the unit cell. It was clear that the arrangement of these planes was aligned in the a-c direction. That should make the motion of the charge to be simpler by a stepping plane toward c-axis.
