Wheat stripe rust,caused by Puccinia striiformis f.sp.tritici(Pst),is one of the most destructive fungal diseases of wheat,and seriously threatens safe production of the crop worldwide.In China,new races historically ...Wheat stripe rust,caused by Puccinia striiformis f.sp.tritici(Pst),is one of the most destructive fungal diseases of wheat,and seriously threatens safe production of the crop worldwide.In China,new races historically appeared and rapidly developed to be predominant races and have resulted in ineffectiveness and replacement of wheat resistance cultivars as well as massive reduction in yield.In the present study,the relative parasitic fitness of the two newlyemerged Yr5-virulent races(TSA-6 and TSA-9)were compared with those of four currently predominant Chinese races(CYR31,CYR32,CYR33,and CYR34)based on evaluation on 10 Chinese wheat cultivars.As a result,there were significant differences in the relative parasitic fitness parameters among overall tested races based on multiple comparison(LSD)analysis(P<0.05).The principal component analysis(PCA)of overall parasitic fitness parameters indicated that the sporulation ability,infection and spore survivability,expansion capacity,and potential pathogenicity were the most important parasitic fitness attributes of the tested races.Based on the establishment of extracted three principal components and a comprehensive factor score mathematical models,evaluations of the parasitic fitness attributes of tested races showed that the level of relative parasitic fitness of the tested six races was:CYR32(1.15)>TSA-9(0.95)>TSA-6(0.92)>CYR34(0.29)>CYR31(–1.54)>CYR33(–1.77).The results indicated that two Yr5-virulent races TSA-9 and TSA-6 possessed relative parasitic fitness higher than races CYR34,CYR31,and CYR33,but lower than race CYR32,and have potential risks in developing to be predominant races.Therefore,continual monitoring of both Yr5-virulent races,and their variants is needed.The use of wheat cultivars(lines)with Yr5 resistance gene singly in wheat breeding is essential for being avoided,and is suggested to combine with other effective stripe rust resistance genes.展开更多
Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved met...Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded interface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.展开更多
Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved met...Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded in- terface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.展开更多
The temperature field during the whole process of SPS sintering TiB2 -BN sample was numerically simulated based on the simplification of the temperature rising process. The result shows that the highest temperature is...The temperature field during the whole process of SPS sintering TiB2 -BN sample was numerically simulated based on the simplification of the temperature rising process. The result shows that the highest temperature is found in the punch and the heat flows from punch to sample and die in SPS sintering system. In the radial direction, the center temperature of the sample is much higher than the circumference temperature of the sampie. In the axial direction, the center temperature of the sample is lower than the border temperature of the sampie. The temperature difference in the sample is growing bigger in the sintering process and reaches the maximum at the end of the heating-up process.展开更多
To verify the effectiveness and correctness of the protection settings in ring structure Shipboard Power System (SPS), a digital-physical hybrid simulation platform at China Ship Development and Design Center (CSDDC) ...To verify the effectiveness and correctness of the protection settings in ring structure Shipboard Power System (SPS), a digital-physical hybrid simulation platform at China Ship Development and Design Center (CSDDC) has been built, which aims to give double verification effect of design scheme and physical device. The platform consists of eMEGAsim digital simulator, signal power amplifiers and digital-analog interface equipments. With this platform, the multiple protection device of ring structure grid can be accessed to form a close-loop test system. Since eMEGAsim model-simulated faults and actual protection device actions are on real time, the tripping settings of each device as well as their coordinate performance between multiple devices can be verified in this close-loop test.展开更多
Rhabditis sp.Bn strain was the first time found suppressive on plant parasitic nematodes(PPNs)in the rhizosphere of greenhouse cucumber.The nematode Bn was applied into soil at the rate of 1.0×1010 Juveniles/hm2 ...Rhabditis sp.Bn strain was the first time found suppressive on plant parasitic nematodes(PPNs)in the rhizosphere of greenhouse cucumber.The nematode Bn was applied into soil at the rate of 1.0×1010 Juveniles/hm2 10 days before cucumber plants being planted in October 2004 and then once a month as treatment.The same volume of tap water was used as control.The density of PPNs increased sharply in control and reached 1 561 Js/100 mL soil in April,whereas it was less than 400 Js/100 mL soil in treatment,significantly lower than that of control(P<0.01).The densities of PPNs,Meloidogyne spp.and Tylenchorhynchus spp.were reduced by 70% and 87% respectively by applying Rhabditis sp.Bn strain.The root-knot index of cucumber in treatment was also reduced significantly(P<0.05)in April 2005.展开更多
基金supported by the National Natural Science Foundation of China(32072358 and 32272507)the National Key R&D Program of China(2021YFD1401000)+1 种基金the earmarked fund for CARS-03,the Natural Science Basic Research Project in Shaanxi Province of China(2020JZ-15)National“111 Project”of China(BP0719026)。
文摘Wheat stripe rust,caused by Puccinia striiformis f.sp.tritici(Pst),is one of the most destructive fungal diseases of wheat,and seriously threatens safe production of the crop worldwide.In China,new races historically appeared and rapidly developed to be predominant races and have resulted in ineffectiveness and replacement of wheat resistance cultivars as well as massive reduction in yield.In the present study,the relative parasitic fitness of the two newlyemerged Yr5-virulent races(TSA-6 and TSA-9)were compared with those of four currently predominant Chinese races(CYR31,CYR32,CYR33,and CYR34)based on evaluation on 10 Chinese wheat cultivars.As a result,there were significant differences in the relative parasitic fitness parameters among overall tested races based on multiple comparison(LSD)analysis(P<0.05).The principal component analysis(PCA)of overall parasitic fitness parameters indicated that the sporulation ability,infection and spore survivability,expansion capacity,and potential pathogenicity were the most important parasitic fitness attributes of the tested races.Based on the establishment of extracted three principal components and a comprehensive factor score mathematical models,evaluations of the parasitic fitness attributes of tested races showed that the level of relative parasitic fitness of the tested six races was:CYR32(1.15)>TSA-9(0.95)>TSA-6(0.92)>CYR34(0.29)>CYR31(–1.54)>CYR33(–1.77).The results indicated that two Yr5-virulent races TSA-9 and TSA-6 possessed relative parasitic fitness higher than races CYR34,CYR31,and CYR33,but lower than race CYR32,and have potential risks in developing to be predominant races.Therefore,continual monitoring of both Yr5-virulent races,and their variants is needed.The use of wheat cultivars(lines)with Yr5 resistance gene singly in wheat breeding is essential for being avoided,and is suggested to combine with other effective stripe rust resistance genes.
基金Supported by the National Natural Science Foundation of China (No.20490206) and the Special Funds for Major State Basic Research Program of China (973 Program, 2004CB217604).
文摘Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded interface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.
基金the National Natural Science Foundation of China (No.20490206) the Special Funds for Major State BasicResearch Program of China (973 Program, 2004CB217604).
文摘Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded in- terface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.
基金Funded by the National Natural Science Foundation of China(No.50272047) and Key Lab Fund of Wuhan University of Scienceand Technology(No.G0306)
文摘The temperature field during the whole process of SPS sintering TiB2 -BN sample was numerically simulated based on the simplification of the temperature rising process. The result shows that the highest temperature is found in the punch and the heat flows from punch to sample and die in SPS sintering system. In the radial direction, the center temperature of the sample is much higher than the circumference temperature of the sampie. In the axial direction, the center temperature of the sample is lower than the border temperature of the sampie. The temperature difference in the sample is growing bigger in the sintering process and reaches the maximum at the end of the heating-up process.
文摘To verify the effectiveness and correctness of the protection settings in ring structure Shipboard Power System (SPS), a digital-physical hybrid simulation platform at China Ship Development and Design Center (CSDDC) has been built, which aims to give double verification effect of design scheme and physical device. The platform consists of eMEGAsim digital simulator, signal power amplifiers and digital-analog interface equipments. With this platform, the multiple protection device of ring structure grid can be accessed to form a close-loop test system. Since eMEGAsim model-simulated faults and actual protection device actions are on real time, the tripping settings of each device as well as their coordinate performance between multiple devices can be verified in this close-loop test.
文摘Rhabditis sp.Bn strain was the first time found suppressive on plant parasitic nematodes(PPNs)in the rhizosphere of greenhouse cucumber.The nematode Bn was applied into soil at the rate of 1.0×1010 Juveniles/hm2 10 days before cucumber plants being planted in October 2004 and then once a month as treatment.The same volume of tap water was used as control.The density of PPNs increased sharply in control and reached 1 561 Js/100 mL soil in April,whereas it was less than 400 Js/100 mL soil in treatment,significantly lower than that of control(P<0.01).The densities of PPNs,Meloidogyne spp.and Tylenchorhynchus spp.were reduced by 70% and 87% respectively by applying Rhabditis sp.Bn strain.The root-knot index of cucumber in treatment was also reduced significantly(P<0.05)in April 2005.
