Upsilon Constants and Their Usefulness in Planck Scale Quantum Cosmology

This paper introduces the two Upsilon constants to the reader. Their usefulness is described with respect to acting as coupling constants between the CMB temperature and the Hubble constant. In addition, this paper summarizes the current state of quantum cosmology with respect to the Flat Space Cosmology (FSC) model. Although the FSC quantum cosmology formulae were published in 2018, they are only rearrangements and substitutions of the other assumptions into the original FSC Hubble temperature formula. In a real sense, this temperature formula was the first quantum cosmology formula developed since Hawking’s black hole temperature formula. A recent development in the last month proves that the FSC Hubble temperature formula can be derived from the Stephan-Boltzmann law. Thus, this Hubble temperature formula effectively unites some quantum developments with the general relativity model inherent in FSC. More progress towards unification in the near-future is expected.

Effects of initial δ phase(Ni_3Nb) on hot tensile deformation behaviors and material constants of Ni-based superalloy

Effects of initial δ phase（Ni_3Nb） on the hot tensile deformation behaviors and material constants of a Ni-based superalloy were investigated over wide ranges of strain rate and deformation temperature. It is found that the true stress-true strain curves exhibit peak stress at a small strain, and the peak stress increases with the increase of initial δ phase. After the peak stress, initial δ phase promotes the dynamic softening behaviors, resulting in the decreased flow stress. An improved Arrhenius constitutive model is proposed to consider the synthetical effects of initial δ phase, deformation temperature, strain rate, and strain on hot deformation behaviors. In the improved model, material constants are expressed as the functions of the content of initial δ phase and strain. A good agreement between the predicted and measured results indicates that the improved Arrhenius constitutive model can well describe hot deformation behaviors of the studied Ni-based superalloy.

Biaxial tensile properties and elastic constants evaluation of envelope material for airship

This paper presents an experimental study to determine the tensile properties of the envelope fabric Uretek3216L under biaxial cyclic loading.First the biaxial cyclic tests were carefully carried out on the envelope material to obtain the stress-strain data and the corresponding nonlinearity and orthotropy of the material were analyzed. Then for some determination options with different stress ratios the least squares method minimizing the strain terms was used to calculate the elastic constants from the experimental data.Finally the influences of the determination options with different stress ratios and the reciprocal relationship on the elastic constants were discussed.Results show that the orthotropy of the envelope material can be attributed to the unbalanced crimp of their constitutive yarns in warp and weft directions and the elastic constants vary noticeably with the determination options as well as the normalized stress ratios.In real design practice it is more reasonable to use constants determined for specific stress states in particular stress ratios depending on the project＆#39;s needs.Also calculating the structures with two limitative sets of elastic constants instead of using only one set is recommendable in light of the great variety of the constant＆#39;s values.

Experimental Determination of the Vibrational Constants of FeS（X5 △） by Dispersed Fluorescence Spectroscopy

Based on previous laser-induced fluorescence excitation spectroscopy work, the vibrational constants of neutral FeS in the X5 △ electronic state were obtained by directly mapping the ground-state vibrational levels up to v＂=3 using conventional laser-induced dispersed fluorescence spectroscopy. The vibrational frequency of FeS（X5 △） （518±5 cm-1） agrees well with that reported in a recent PES measurement （520±30 cm-1） [J. Phys. Chem. A 107, 2821 （2003）] which is the only one prior experimental vibrational frequency value for the 5 △ state of FeS. Careful comparisons of our experimental results and those documented in the literature （mainly from theoretical predictions） suggest that the ground state of FeS is 5 △ state.

Determination of Stability Constants of Cadmium-Glycine Complexes by a Unified Treatment for Potentiometric and Polarographic Data

The cadmium（Ⅱ）-glycine system was studied by the two experimental techniques, ion sensitive electrode （ISE） and differential pulse polarography （DPP）, and the experimental data obtained were used by a unified mathematical treatment to calculate the complex stability constants. The combination of the two techniques is of many advantages as ISE can be performed at low [LT]：[MT] ratios and significantly higher [MT], whereas DPP could be used well at large [LT]：[MT] ratios and much smaller [MT]. This makes it possible to study a metal-ligand system in a relatively broader range of experimental conditions that, in turn, provides more information about the metakligand system of interest. Applying the unified mathematical treatment to the cadmium-glycine system, two new complexes MHL and ML2（OH） as well as three complexes ML, ML2 and ML3, reported in literatures, could be modeled and all their stability constants have been refined.

Dual laterolog borehole correction based on dynamic tool constants

The positive and negative difference of deep and shallow resisitivity in formation without invasion is caused mainly by the fixed two tool constants from numerical simulations. A dynamic calibration method for tool constants is proposed based on the effects of the mud and formation resisitivity ratio on the two constants calculated using the finite element method （FEM）. Finally, four specific examples are given to validate the dynamic calibration method. It is an automatic borehole correction method and can give more accurate formation resistivity. The method is useful for dual laterolog logging.

DDI METHOD FOR MEASURING OPTICAL CONSTANTS OF THIN FILMS

By double beam and double wave interferomatric (DDI) method, the optical constants of thin films, i.e. refractive index, extinction coefficient and thickness may be determined in infrared (3.39 μm) and in visible (0.633 μm) wavelengths in the same optical path with a tunable double wave He Ne laser designed by ourselves. The measuring principle and the device are describod.

Salting-in/Salting-out Mechanism of Carbon Dioxide in Aqueous Electrolyte Solutions

The solvation of carbon dioxide in sea water plays an important role in the carbon circle and the world climate. The salting-out/salting-in mechanism of CO2 in electrolyte solutions still remains elusive at molecule level. The ability of ion salting-out/salting-in CO2 in electrolyte solution follows Hofmeister Series and the change of water mobility induced by salts can be predicted by the viscosity B-coefficients. In this work, the chemical potential of carbon dioxide and the dynamic properties of water in aqueous NaCl, KF and NaClO4 solutions are calculated and analyzed. According to the viscosity B-coefficients, NaClO4 （0.012） should salt out the carbon dioxide relative to in pure water, but the opposite effect is observed for it. Our simulation results suggest that the salting-in effect of NaClO4 is due to the strongly direct anion-CO2 interaction. The inconsistency between＂ Hofmeister Series and the viscosity B-coefficient suggests that it is not always right to indicate whether a salt belongs to salting-in or salting-out just from these properties of the salt solution in the absence of solute.

Effect of lens constants optimization on the accuracy of intraocular lens power calculation formulas for highly myopic eyes

AIM: To evaluate the effect of different lens constant optimization methods on the accuracy of intraocular lens(IOL) power calculation formulas for highly myopic eyes.METHODS: This study comprised 108 eyes of 94 consecutive patients with axial length(AL) over 26 mm undergoing phacoemulsification and implantation of a Rayner(Hove, UK) 920H IOL. Formulas were evaluated using the following lens constants: manufacturer’s lens constant, User Group for Laser Interference Biometry(ULIB) constant, and optimized constant for long eyes. Results were compared with Barrett Universal II formula, original Wang-Koch AL adjustment method, and modified Wang-Koch AL adjustment method. The outcomes assessed were mean absolute error(MAE) and percentage of eyes with IOL prediction errors within ±0.25, ±0.50, and ±1.0 diopter(D). The nonparametric method, Friedman test, was used to compare MAE performance among constants.RESULTS: Optimized constants could significantly reduce the MAE of SRK/T, Hoffer Q, and Holladay 1 formulas compared with manufacturer’s lens constant, whereas the percentage of eyes with IOL prediction errors within ±0.25, ±0.50, and ±1.0 D had no statistically significant differences. Optimized lens constant for long eyes alone showed non-significant refractive advantages over the ULIB constant. Barrett Universal II formula and formulas with AL adjustment showed significantly higher accuracy in highly myopic eyes(P<0.001). CONCLUSION: Lens constant optimization for the subset of long eyes reduces the refractive error only to a limited extent for highly myopic eyes.

Binding Constants for Terbium(Ⅲ) with Chicken Apoovotransferrin

The binding of Tb 3+ to chicken apoovotransferrin was studied by monitoring the fluorescent intensity of Tb 3+ at 549 nm. The conditional equilibrium constants for the complexation of Tb 3+ by chicken apoovotransferrin in 0 1 mol/L hepes, at pH 7 4 and room temperature were measured. The successive macroscopic binding constants are lg K 1=9 08±0 12 and lg K 2=7 36±0 22. The molar fluorescence enhancement of Tb 3+ apoovotransferrin complex is (2 06±0 14)×10 4 mol -1 ·L. The fluorescence quenching experiment and the titration of N terminal monoferric ovotransferrin showed that Tb 3+ has a preference for being bound to the N terminal binding site of apoovotransferrin.

Investigations on spectroscopic parameters, vibrational levels, classical turning points and inertial rotation and centrifugal distortion constants for the 1 ＋ X^1∑g^＋ state of sodium dimer

The density functional theory （B3LYP, B3P86） and the quadratic configuration-interaction method including single and double substitutions （QCISD（T）, QCISD） presented in Gaussian03 program package are employed to calculate the equilibrium internuclear distance Re, the dissociation energy De and the harmonic frequency We for the XIEg＋ state of sodium dimer in a number of basis sets. The conclusion is gained that the best Re, De and We results can be attained at the QCISD/6-311G（3df,3pd） level of theory. The potential energy curve at this level of theory for this state is obtained over a wide internuclear separation range from 0.16 to 2.0 nm and is fitted to the analytic Murrell-Sorbie function. The spectroscopic parameters De, DO, Re, ωe, ωe Xe, αe and Be are calculated to be 0.7219 eV, 0.7135 eV, 0.31813 nm, 151.63 cm^-1, 0.7288 cm^-1, 0.000729 cm^-1 and 0.1449 cm^-1, respectively, which are in good agreement with the measurements. With the potential obtained at the QCISD/6-311G（3df,3pd） level of theory, a total of 63 vibrational states is found when J = 0 by solving the radial SchrSdinger equation of nuclear motion. The vibrational level, corresponding classical turning point and inertial rotation constant are computed for each vibrational state. The centrifugal distortion constants （Dr Hv, Lv, Mv, Nv and Ov） are reported for the first time for the first 31 vibrational states when J = 0.

Changes of Intramuscular Fat Composition,Lipid Oxidation and Lipase Activity in Biceps femoris and Semimembranosus of Xuanwei Ham During Controlled Salting Stages

Fatty acid composition of neutral lipids （NLs）, phospholipids （PLs） and free fatty acids （FFAs） from intramuscular fat （IMF）, lipid oxidation and lipase activity in muscle Semimembranosus （SM） and msucle Biceps femoris （BF） of dry-cured Xuanwei ham during the 90-d salting stages were analysed. The salt content increased from 0.34 to 3.52%in BF and from 0.10 to 5.42%in SM during the 90 d salting stage, respectively. PLs of IMF in both BF and SM decreased 54.70%（P〈0.001） and 34.64%（P〈0.05）, furthermore, the saturated fatty acids （SFA）, monounsaturated fatty acids （MUFA） and polyunsaturated fatty acids （PUFA） of PLs in both muscles were hydrolysed almost isochronously. FFAs were increased from 0.46 g 100 g-1 lipids to 2.92 g 100 g-1 lipids in BF at the end of salting, which was lower than SM （from 1.29 g 100 g-1 lipids to 9.70 g 100 g-1 lipids）. The activities of acid lipase, neutral lipase and acid phospholipase all remained active in the 90 d. The thiobarbituric acid reactive substances （TBARS） was slowly increased to 1.34 mg kg-1 muscle in BF and to 2.44 mg kg-1 muscle in SM during the salting stage. In conclusion, the controlled salting process prompted the hydrolysis of PLs of IMF notably and increased the lipid oxidation of muscles within some limits.

Valence Bond Study of Dissociation Behavior and Spectroscopic Constants for the Ground States of LiF and NaF

Ab initio VB calculations were used to determine the accurate spectroscopic parameters of the ground states of LiF and NaF. A set of potential energy curves corresponding to the ground states including ionic and covalent interactions, pure ionic interaction and covalent interaction were generated using the VBSCF method. Curve crossing in the dissociation processes of LiF and NaF was discussed. The optimized VB wave functions suggest that LiF and NaF are of high ionicity, and their ionic weights are 86 2% and 94 6%, respectively. NaF has a higher ionicity. The main difference between atom F and ion F - and the effect of the proper description of this difference on dissociation energies were investigated.

Thickness dependence of the optical constants of oxidized copper thin films based on ellipsometry and transmittance

Thin oxidized copper films in various thickness values are deposited onto quartz glass substrates by electron beam evaporation. The ellipsometry parameters and transmittance in a wavelength range of 300 nm-1000 nm are collected by a spectroscopic ellipsometer and a spectrophotometer respectively. The effective thickness and optical constants, i.e., refractive index n and extinction coefficient k, are accurately determined by using newly developed ellipsometry combined with transmittance iteration method. It is found that the effective thickness determined by this method is close to the physical thickness and has obvious difference from the mass thickness for very thin film due to variable density of film. Furthermore, the thickness dependence of optical constants of thin oxidized Cu films is analyzed.

Third-order elastic, piezoelectric, and dielectric constants

The definitions of the third-order elastic,piezoelectric,and dielectric constants and the properties of the associated tensors are discussed.Based on the energy conservation and coordinate transformation,the relations among the third-order constants are obtained.Furthermore,the relations among the third-order elastic,piezoelectric,and dielectric constants of the seven crystal systems and isotropic materials are listed in detail.These third-order constants relations play an important role in solving nonlinear problems of elastic and piezoelectric materials.It is further found that all third-order piezoelectric constants are 0 for 15 kinds of point groups,while all third-order dielectric constants are 0 for 16 kinds of point groups as well as isotropic material.The reason is that some of the point groups are centrally symmetric,and the other point groups are high symmetry.These results provide the foundation to measure these constants,to choose material,and to research nonlinear problems.Moreover,these results are helpful not only for the study of nonlinear elastic and piezoelectric problems,but also for the research on flexoelectric effects and size effects.

Effective electroelastic constants for three-phase confocal elliptical cylinder model in piezoelectric quasicrystal composites

A three-phase confocal elliptical cylinder model is proposed to analyze micromechanics of one-dimensional hexagonal piezoelectric quasicrystal （PQC） compos- ites. Exact solutions of the phonon, phason, and electric fields are obtained by using the conformal mapping combined with the Laurent expansion technique when the model is subject to far-field anti-plane mechanical and in-plane electric loadings. The effective elec- troelastic constants of several different composites made up of PQC, quasicrystal （QC）, and piezoelectric （PE） materials are predicted by the generalized self-consistent method. Numerical examples are conducted to show the effects of the volume fraction and the cross-sectional shape of inclusion （or fiber） on the effective electroelastic constants of these composites. Compared with other micromechanical methods, the generalized self- consistent and Mori-Tanaka methods can predict the effective electroelastic constants of the composites consistently.

A Comparative Study of Elastic Constants of NiTi and NiAl Alloys from First-Principle Calculations

To investigate the origin of the strong dependence of martensitic transformation temperature on composition, the elastic properties of high temperature B2 phases of both NiTi and NiAI were calculated by a first-principle method, the exact-muffin orbital method within coherent potential approximation. In the composition range of 50-56 at. pct Ni of NiTi and 60-70 at. pct Ni of NiAI in which martensitic transformation occurs, non-basalplane shear modulus c44 increases with increasing Ni content, while basal-plane shear modulus c＇ decreases. In the above composition ranges however the transformation temperature of NiAI increases with increasing Ni content while that of NiTi decreases from experimental observation. The softening of c＇ is experimentally observed only in NiAI, and the decrease of c＇ with increasing Ni content is responsible for the increase of transformation temperature. The result of the present work demonstrates that, besides c＇, c44 also influences the martensitic transformation of NiTi and plays quite important a role.

The Determination of the Protonation Constants of A New Macrocyclic Dinucleating Ligand, BDBPH

The protonation constants of a new dinucleating 24-membered hexaazadiphenol macrocyclic ligand, BDBPH, were determined by potentiometric measurement at 25.0 degreesC and mu = 0.100 mol.L-1 (KCl). The species distributions of the deprotonated and protonated compounds in the pH range from 2 to 12 aqueous solutions were also described.

Proton radiation effects on optical constants of Al film reflector

The Al film reflectors can yield a high-reflectance over a broad wavelength region, and have been widely used in the spacecraft optical instruments for high quality optical applications. Under the irradiation of charged particles in the Earth radiation belt, the reflectors could be deteriorated. In order to reveal the deterioration mechanism, the change in optical constants of Al film reflector induced by proton radiation with 60 keV was studied in an environment of vacuum with heat sink. Experimental results showed that when the radiation damage primarily occurs in the Al reflecting film, the extinction coefficient k will gradually decrease with increasing radiation fluence, which results in the decrease of the energies of reflective light. Therefore, the proton radiation induced an obvious degradation of spectral reflectance in the wavelength region from 200 to 800nm on the Al film reflector.

Simultaneous estimation of aerosol optical constants and size distribution from angular light-scattering measurement signals

The angular light-scattering measurement（ALSM） method combined with an improved artificial bee colony algorithm is introduced to determine aerosol optical constants and aerosol size distribution（ASD） simultaneously. Meanwhile, an optimized selection principle of the ALSM signals based on the sensitivity analysis and principle component analysis（PCA）is proposed to improve the accuracy of the retrieval results. The sensitivity analysis of the ALSM signals to the optical constants or characteristic parameters in the ASD is studied first to find the optimized selection region of measurement angles. Then, the PCA is adopted to select the optimized measurement angles within the optimized selection region obtained by sensitivity analysis. The investigation reveals that, compared with random selection measurement angles, the optimized selection measurement angles can provide more useful measurement information to ensure the retrieval accuracy. Finally,the aerosol optical constants and the ASDs are reconstructed simultaneously. The results show that the retrieval accuracy of refractive indices is better than that of absorption indices, while the characteristic parameters in ASDs have similar retrieval accuracy. Moreover, the retrieval accuracy in studying L-N distribution is a little better than that in studying Gamma distribution for the difference of corresponding correlation coefficient matrixes of the ALSM signals. All the results confirm that the proposed technique is an effective and reliable technique in estimating the aerosol optical constants and ASD simultaneously.