SINOPEC's Success in Fixed-bed Methanol-to-Propylene Pilot Scale Tests

The first in China pilot tests of fixed-bed methanol-topropylene unit were successfully implemented at the Yangzi Petrochemical Company(YPC).It is told that this technology has opened up a new process for production of propylene through coal gasification,and China has possessed both the fluidized-bed methanolto-propylene process(F-MTP)and the

The Preliminary Study on the Small-scale Test of the Microbial Quick-degumming Ramie

During the experiments with low temperature plasma treating the ramie degumming microbe,the authors found some kinds of microbe which can degum ramie in 5-6L fluid very quickly.In comparison with some standards of microbiological experiments,5L or 6L-scale can be called the small-scale.Therefore,the authors believe that the experiments of the microbial quick-degumming ramie can be enlarged from the laboratory-scale test to be applied in the future.

3-D Modelling of the Confederation Bridge Using Data of Full Scale Tests

Long-span bridges are special structures that require advanced analysis techniques to examine their performance. This paper presents a procedure developed to model the Confederation Bridge using 3-D beam elements. The model was validated using the data collected before the opening of the bridge to the public. The bridge was instrumented to conduct fullscale static and dynamic tests. The static tests were to measure the deflection of the bridge pier while the dynamic tests to measure the free vibrations of the pier due to a sudden release of the static load. Confederation Bridge is one of the longest reinforced concrete bridges in the world. It connects the province of Prince Edward Island and the province of New Brunswick in Canada. Due to its strategic location and vital role as a transportation link between these two provinces, it was designed using higher safety factors than those for typical highway bridges. After validating the present numerical model, a procedure was developed to evaluate the performance of similar bridges subjected to traffic and seismic loads. It is of interest to note that the foundation stiffness and the modulus of elasticity of the concrete have significant effects on the structural responses of the Confederation Bridge.

Small-scale fire tests in the underwater tunnel section model with new sidewall smoke extraction

The Shenzhen–Zhongshan Bridge is a 24‐km‐long bridge and tunnel system,including a 6.8-km-long super cross section subsea tunnel.To solve the smoke exhaust problem of a super large cross-section subsea tunnel,the tunnel has a new smoke exhaust system that combines a horizontal smoke exhaust cross section at the top and sidewall smoke exhaust holes.In order to evaluate the potential fire hazards of this type of tunnel,a 1:30 tunnel model was established and 140 smallscale experiments on underwater tunnel fires were conducted.By changing the fire power,fire location,and fan operation mode,different scenarios of submarine immersed tunnel fire were simulated and the related key parameters such as fire smoke diffusion behavior and smoke temperature distribution were studied.On this basis,the optimal smoke control strategy was proposed for different fire scenarios.The research results indicate that the new smoke exhaust system can fully utilize the smoke flow characteristics,significantly improve smoke exhaust efficiency,and increase available evacuation time,thus further enhancing the fire safety of super large cross-section subsea tunnels.

Research on the intelligent internet nursing model based on the child respiratory and asthma control test scale for asthma management of preschool children

BACKGROUND Childhood asthma is a common respiratory ailment that significantly affects preschool children.Effective asthma management in this population is particularly challenging due to limited communication skills in children and the necessity for consistent involvement of a caregiver.With the rise of digital healthcare and the need for innovative interventions,Internet-based models can potentially offer relatively more efficient and patient-tailored care,especially in children.AIM To explore the impact of an intelligent Internet care model based on the child respiratory and asthma control test(TRACK)on asthma management in preschool children.METHODS The study group comprised preschoolers,aged 5 years or younger,that visited the hospital's pediatric outpatient and emergency departments between January 2021 and January 2022.Total of 200 children were evenly and randomly divided into the observation and control groups.The control group received standard treatment in accordance with the 2016 Guidelines for Pediatric Bronchial Asthma and the Global Initiative on Asthma.In addition to above treatment,the observation group was introduced to an intelligent internet nursing model,emphasizing the TRACK scale.Key measures monitored over a six-month period included the frequency of asthma attack,emergency visits,pulmonary function parameters(FEV1,FEV1/FVC,and PEF),monthly TRACK scores,and the SF-12 quality of life assessment.Post-intervention asthma control rates were assessed at six-month follow-up.RESULTS The observation group had fewer asthma attacks and emergency room visits than the control group(P<0.05).After six months of treatment,the children in both groups had higher FEV1,FEV1/FVC,and PEF(P<0.05).Statistically significant differences were observed between the two groups(P<0.05).For six months,children in the observation group had a higher monthly TRACK score than those in the control group(P<0.05).The PCS and MCSSF-12 quality of life scores were relatively higher than those before the nursing period(P<0.05).Furthermore,the groups showed statistically significant differences(P<0.05).The asthma control rate was higher in the observation group than in the control group(P<0.05).CONCLUSION TRACK based Intelligent Internet nursing model may reduce asthma attacks and emergency visits in asthmatic children,improve lung function,quality of life,and the TRACK score and asthma control rate.The effect of nursing was significant,allowing for development of an asthma management model.

Acoustic emission characterization of microcracking in laboratory-scale hydraulic fracturing tests

Understanding microcracking near coalesced fracture generation is critically important for hydrocarbon and geothermal reservoir characterization as well as damage evaluation in civil engineering structures. Dense and sometimes random microcracking near coalesced fracture formation alters the mechanical properties of the nearby virgin material. Individual microcrack characterization is also significant in quantifying the material changes near the fracture faces （i.e. damage）. Acoustic emission （AE） monitoring and analysis provide unique information regarding the microcracking process temporally, and infor- mation concerning the source characterization of individual microcracks can be extracted. In this context, laboratory hydraulic fracture tests were carried out while monitoring the AEs from several piezoelectric transducers. In-depth post-processing of the AE event data was performed for the purpose of under- standing the individual source mechanisms. Several source characterization techniques including moment tensor inversion, event parametric analysis, and volumetric deformation analysis were adopted. Post-test fracture characterization through coring, slicing and micro-computed tomographic imaging was performed to determine the coalesced fracture location and structure. Distinct differences in fracture characteristics were found spatially in relation to the openhole injection interval. Individual microcrack AE analysis showed substantial energy reduction emanating spatially from the injection interval. It was quantitatively observed that the recorded AE signals provided sufficient information to generalize the damage radiating spatially away from the injection wellbore.

Real-time multibody modeling and simulation of a scaled bogie test rig

In wheel–rail adhesion studies,most of the test rigs used are simplified designs such as a single wheel or wheelset,but the results may not be accurate.Alternatively,representing the complex system by using a full vehicle model provides accurate results but may incur complexity in design.To trade off accuracy over complexity,a bogie model can be the optimum selection.Furthermore,only a real-time model can replicate its physical counterpart in the time domain.Developing such a model requires broad expertise and appropriate software and hardware.A few published works are available which deal with real-time modeling.However,the influence of the control system has not been included in those works.To address these issues,a real-time scaled bogie test rig including the control system is essential.Therefore,a 1:4 scaled bogie roller rig is developed to study the adhesion between wheel and roller contact.To compare the performances obtained from the scaled bogie test rig and to expand the test applications,a numerical simulation model of that scaled bogie test rig is developed using Gensys multibody software.This model is the complete model of the test rig which delivers more precise results.To exactly represent the physical counterpart system in the time domain,a real-time scaled bogie test rig(RT-SBTR)is developed after four consecutive stages.Then,to simulate the RT-SBTR to solve the internal state equations and functions representing the physical counterpart system in rigs used are simplified designs such as a single wheel or wheelset,but the results may not be accurate.Alternatively,representing the complex system by using a full vehicle model provides accurate results but may incur complexity in design.To trade off accuracy over complexity,a bogie model can be the optimum selection.Furthermore,only a real-time model can replicate its physical counterpart in the time domain.Developing such a model requires broad expertise and appropriate software and hardware.A few published works are available which deal with real-time modeling.However,the influence of the control system has not been included in those works.To address these issues,a real-time scaled bogie test rig including the control system is essential.Therefore,a 1:4 scaled bogie roller rig is developed to study the adhesion between wheel and roller contact.To compare the performances obtained from the scaled bogie test rig and to expand the test applications,a numerical simulation model of that scaled bogie test rig is developed using Gensys multibody software.This model is the complete model of the test rig which delivers more precise results.To exactly represent the physical counterpart system in the time domain,a real-time scaled bogie test rig(RT-SBTR)is developed after four consecutive stages.Then,to simulate the RT-SBTR to solve the internal state equations and functions representing the physical counterpart system in equal or less than actual time,the real-time simulation environment is prepared in two stages.To such end,the computational time improved from 4 times slower than real time to 2 times faster than real time.Finally,the real-time scaled bogie model is also incorporated with the braking control system which slightly reduces the computational performances without affecting real-time capability.

Simulation of large-scale numerical substructure in real-time dynamic hybrid testing

A solution scheme is proposed in this paper for an existing RTDHT system to simulate large-scale finite element （FE） numerical substructures. The analysis of the FE numerical substructure is split into response analysis and signal generation tasks, and executed in two different target computers in real-time. One target computer implements the response analysis task, wherein a large time-step is used to solve the FE substructure, and another target computer implements the signal generation task, wherein an interpolation program is used to generate control signals in a small time-step to meet the input demand of the controller. By using this strategy, the scale of the FE numerical substructure simulation may be increased significantly. The proposed scheme is initially verified by two FE numerical substructure models with 98 and 1240 degrees of freedom （DOFs）. Thereafter, RTDHTs of a single frame-foundation structure are implemented where the foundation, considered as the numerical substructure, is simulated by the FE model with 1240 DOFs. Good agreements between the results of the RTDHT and those from the FE analysis in ABAQUS are obtained.

Effect of Rating Scales and Test Parts of Body on the Evaluation Results of Fabric-evoked Prickle

The effect of rating scales and test parts of body on the fabric-evoked prickle evaluation results are studied by carrying out subjective evaluation tests under controlled environment conditions (24±1)℃,(65±5) %RH. Ten college female students aged about 20 were chosen as the subjects, who have participated a preliminary training on subjective prickle evaluation. The prickle of a range of 9 light-weight worsted woven wool and wool blend fabrics and a cotton fabric were tested by using a 15 rating scale and using a 010 rating scale respectively at different test parts of body respectively such as forearm, upper arm ball and neck back. The test results were statistically analyzed. It is found that there is a significant correlation coefficient between the evaluation results of using the 15 rating scale and of using the 010 rating scale. It is also found that there are highly significant correlation coefficients between the evaluation results of using the forearm prickle test and the neck back prickle test, between the evaluation results of using the neck back prickle test and the upper arm ball prickle test, and between the evaluation results of using the forearm prickle test and the upper arm ball prickle test. It is suggested that the forearm prickle test is preferable in evaluating fabric-evoked prickle for its convenience and sensitivity.

Full-scale model tests and nonlinear analysis of prestressed concrete simply supported box girders

Full-scale model tests were carried out on a 30 m span prestressed concrete box girder and a 20 m span prestressed concrete hollow slab. Failure models were prestressed reinforcement tensile failure and crushing of roof concrete,respectively. The ductility indexes of the box girder and hollow slab were 1.99 and 1.23, respectively,according to the energy viewpoint. Based on the horizontal section hypothesis,the nonlinear computation procedure was established using the limited banding law,and it could carry out the entire performance analysis including the unloading,mainly focusing on the ways to achieve the unloading curves computation through stress-strain,moment-curvature and load-displacement curves. Through the procedure,parameters that influence on the bearing capacity,deformation performance and ductility of the structures were analyzed. Those parameters were quantity of prestressed reinforcement and tension coefficients of prestressed reinforcement. From the analysis,some useful conclusions can be obtained.

RCS SCALE-MODEL-TESTING METHOD BY VARIANCE IN THE SIZE FOR SIMPLY SHAPED SCATTERERS

t According to a general representation of physical scale factor of RCS for variance in the size of simply shaped scatterers, a novel RCS model-testing method is described. The computed results of the prototype scatterers by this method from the model-testing agree well with their measured values both for two kinds of simply shaped scatterers, cylinders and ladder-shaped plates.

荒漠草原不同植物群落蒸散组分特征及其环境因子影响分析

蒸散发是生态水文过程的关键环节,掌握蒸散组分的变化特征及其影响因子,对干旱半干旱地区的可持续发展至关重要。以荒漠草原多年生植物针茅群落和一年生植物猪毛蒿群落为研究对象,利用小型蒸渗仪开展了连续3年监测,分析了蒸散组分的日、月和年变化规律,探讨了影响蒸散组分的主要环境因子。结果表明:晴天时,多年生和一年生植物群落蒸散组分呈先增加后减小的抛物线型,夜间蒸散活动较弱,累积蒸散量较低,不足全天总累积蒸散量的20%;阴天时各蒸散组分无明显峰值,且日累积量均较小,一年生和多年生植物群落的蒸散量、蒸发量和蒸腾量无显著差异;10.64 mm/d及以上降雨对蒸散和蒸发的日变化具有明显影响,随着降雨量的增多,蒸散量和蒸发量也呈增大趋势,但蒸腾量则相对较小。从月动态来看,7—9月占全年蒸散量和蒸发量的一半左右,冬春季蒸散量和蒸发量维持在全年最低水平。年蒸散量与年降雨量接近,而蒸腾量占蒸散量的比例低于10%。总体来看,多年生植物群落蒸散量较一年生植物群落多。采用Mantel检验方法分析不同时间尺度影响蒸散组分的主要气候因素,在小时尺度上太阳辐射与蒸发量和蒸腾量显著性水平较高(P<0.01),但相关性较低(r<0.2);在日尺度上,蒸散量、蒸发量和蒸腾量与降雨量的显著性(P<0.01)和相关性(r≥0.4)均最高;而月尺度上,降雨量和降雨速率与蒸散量、蒸发量的相关性较高(0.2≤r<0.4),但显著性较低(P≥0.05)。因此,蒸散组分受环境因子的影响在不同时间尺度上具有较大差异,说明蒸散组分受多种因子共同影响。

时速120 km地铁快线空气动力学试验研究

为探明设计时速120 km快速地铁列车在多区段桥隧衔接线路运行时的气动效应和气密性能,采用实车试验的方法,在武汉某多区段桥隧衔接地铁快线对某4车编组的新研A型密封性地铁列车开展空气动力学测试。实验测试系统采用LL-250-15A型Kulite压力传感器,通过测量列车外部和内部的瞬态压力变化,分析全线路车外压力波动特性,对比沿列车长度方向不同测点位置的压力变化幅值,并分析不同空调状态下的车内压力舒适性。经过3次实验测试分析,该实验的结果具有可重复性。研究结果表明:全线路运行时,列车在隧道段内加减速导致车外压力变化幅值明显大于高架段,气动效应最恶劣的位置为地下段人防门变截面处,列车上行通过该处时车外任意3 s内压力变化幅值为1 071 Pa,下行通过该处时车外任意3 s内压力变化幅值为905 Pa;相对于下行线全线路,上行线车外任意3 s内压力变化幅值大18.3%;列车正线运营时压力波保护阀会在压力变化剧烈区段进行动作响应,列车上行时,空调开启、压力波保护阀正常启用状态下,车内任意3 s内压力变化幅值相对于压力波保护阀打开未启用时减少了16%,下行时,减少了28%,空调压力波保护阀能够有效降低车外压力波动对车内气压变化的影响。本文研究成果可为快速地铁线路设计、地铁列车运营及地铁气密性优化提供参考依据。

Scaled down model design of shaking table test of Taizhou Bridge

Taizhou Bridge is the first kilometer level three-pylon two-span suspension bridge in the world and the structural complexity has significant effects on the seismic performance of the bridge. Shaking table test of Taizhou Bridge is arranged to investigate the effects of non-uniform ground motion input, collision between main and side spans and optimal seismic structural system. It's very important and difficult to design and manufacture the scaled down model of Taizhou Bridge used during the shaking table test. The key point is that the girder and pylons are very hard to be manufactured if the similarity ratio is strictly followed. Based on the finite element method (FEM) analysis, a simplified scaled down model is designed and the bending stiffness of the girder and pylon are strictly simulated, and the torsion stiffness and axial stiffness are not strictly simulated. The inner forces and displacements of critical sections, points of simplified model and theoretical model are compared by FEM analysis, and it's found out that the difference between the seismic responses is relatively small. So, the simplified model can be used to conduct the shaking table test by the FEM verification.

乡村旅游地居民公民意识量表开发与检验

乡村振兴旨在促进乡村经济、社会和文化的全面发展,乡村居民作为乡村发展的主体,其公民意识的觉醒和提升是实现乡村振兴的关键。目前学术界对乡村旅游地居民公民意识的研究涉及较少,能测量的量表更是少见。以乡村旅游地居民为研究对象,通过文献回顾和半结构化访谈,提炼出乡村旅游地居民公民意识的核心内涵及结构维度;在此基础上,通过专家咨询、问卷预调研等方式确定居民公民意识的初始量表,并对安徽宏村、湖南张谷英村和靖港古镇3个乡村旅游地所在居民开展问卷调查。研究发现:乡村旅游地居民公民意识量表由主体意识、法律意识和公共意识3个维度,共10个测项构成,量表的信效度俱佳。

隧道分岔形式对分流局部通风阻力特性的影响

目的:随着城市建设水平和强度提高,带匝道的分岔隧道日趋增多。针对分岔隧道通风设计难题,亟待获取隧道分岔形式对分流局部通风阻力特性的影响规律。方法:通过搭建同步满足阻力和压力相似的1/13缩尺分岔隧道通风试验平台,构建分岔隧道三维CFD模型,探究了分岔隧道不同分岔形式气流的流动特征和局部阻力系数,并进一步分析了分流结构与减速车道等隧道分岔形式特征对局部阻力系数的影响。结果:表明主线与匝道局部阻力系数随分流比增大呈现先减小后增大的趋势,且在分流比为0.4时达到最小。平行分岔隧道相比定向分岔隧道,主线局部阻力系数差别不大,而匝道局部阻力系数存在较明显的差异,分流比较小时,平行分岔隧道匝道局部阻力更大,分流比较大时则相反。增设减速车道,分流比较小时会减小匝道局部阻力系数,但会增加主线局部阻力系数,分流比较大时则相反。结论:研究结果可为分岔隧道的通风设计提供参考。

KT形钢管相贯节点受力性能试验研究

依托某户外剧场钢结构顶棚结构设计,首先对其管桁架关键KT形钢管相贯节点进行了足尺模型试验,测试分析了该节点相贯线、主管及支管应变分布规律。试验结果显示,在最大荷载作用下,相贯节点因支管相贯线附近部分屈服而不能继续承载,其余位置未屈服,表明支管相贯线附近位置是该相贯节点最薄弱位置。然后运用ANSYS有限元软件建立KT形钢管相贯节点有限元模型,将试验结果与有限元分析结果作对比,验证了有限元模型的准确性。最后通过有限元模拟探讨了增大支管厚度以及增设加劲肋对节点受力性能的影响。有限元分析结果显示,增大支管厚度对其受力性能影响较小;增设加劲肋可以有效降低支管相贯线附近位置的最大应力水平,能有效延缓支管屈服,明显提高管桁架节点的承载力。

平面KK型矩形钢管节点静力试验研究

依托某主题广场月牙形艺廊单层网壳钢屋架结构,选取其最不利受力节点,设计了中心插板节点和毂节点两种KK型矩形钢管节点,分别对其足尺模型进行静载试验,测试分析模型节点区域的应变及应力分布规律,对比分析支管端部的位移变化。结果表明:1)设计荷载水平下,两个节点均满足受力要求;毂节点和中心插板节点的最大试验荷载约为等效设计荷载的2.85倍和3.25倍,节点安全储备较高;2)在最大试验荷载作用下,两个节点支管根部与中心构件相贯焊缝附近部分均不同程度地屈服,毂节点圆筒内加劲肋焊缝局部出现开裂;3)相同荷载作用下,中心插板节点相应位置应力应变水平相对较低,故中心插板节点的承载强度较高;4)由试验荷载-位移曲线分析得出毂节点的各肢平均位移比中心插板节点约大13.3%,表明中心插板节点弹性刚度较大。

装配式水泥路面夹环连接式传力杆接缝设计及验证

面向可拆卸装配式水泥路面,提出了一种夹环连接式传力杆接缝,在阐述其特征和基本参数的基础上,选取挠度传荷系数和弯沉差作为指标,使用有限元方法分析了下开口槽、传力杆、夹环构件等参数对夹环连接式传力杆接缝传荷能力的影响,同时分析了夹环连接式传力杆接缝的构件及界面应力的变化规律,得到了合理的接缝参数;此外,通过室内足尺试验评价了夹环连接式传力杆接缝的传荷性能。结果表明,提出的夹环连接式传力杆接缝的传荷能力满足要求,具有一定的工程应用价值。

平钢板-UHPC组合桥面板纵向抗负弯性能试验研究

某大桥次边跨及中跨主梁为钢-UHPC组合梁,钢-UHPC组合梁的桥面板首次采用一种通过PBL剪力键将8 mm平钢板与15 cm的UHPC层连接起来的新型组合桥面体系。为了探究该桥新型钢-UHPC组合桥面板抗负弯矩性能与安全性,完成了2块足尺模型的静力性能试验,进行了桥梁整体受力和桥面板局部受力计算,以及桥面板抗负弯矩极限承载力构成分析。结果表明:UHPC名义开裂强度达8.90 MPa以上,其值远大于实桥荷载作用下UHPC层上缘的纵桥向最大拉应力,组合桥面板负弯矩抗裂性能良好,能满足工程需求;组合桥面板抗负弯承载力的计算,UHPC受拉本构宜采用三折线模型,抗负弯承载力简化计算的UHPC受拉区等效均布应力折减系数可取0.76,抗负弯承载力状态的受压钢板受力仍处于线弹性阶段,抗负弯破坏模式与抗正弯明显不同,为受拉钢筋拉断;PBL剪力键能保证了钢板与UHPC板整体共同受力;组合桥面板在负弯矩作用下的延性良好,裂宽增长缓慢,UHPC的名义极限强度达名义开裂强度的4.1倍以上,到达极限荷载后,组合板承载力没有明显下降。