Ablative behavior and mechanism of SiC_(f) /SiBCZr composites prepared by PIP process

SiC_(f)/SiBCZr composites were prepared by polymer precursor impregnation and pyrolysis process with near stoichiometric ratio SiC fiber preform as reinforcement phase and SiBCZr multiphase ceramic precursor as impregnating reagent.The results highlighted that the SiC_(f)/SiBCZr composites exhibited excellent ablative properties after ablative tests at 1200℃/3600 s and 1400℃/3600 s,and the strength retention rates of the composites reached 90%and 85%,respectively.This was mainly due to the liquid sealing effect of the ablative products represented by B2O_(3) and SiO_(2)∙B_(2)O_(3),which inhibited the ablative reaction by reducing the diffusion rate of the oxidation medium,and the solid pinning effect of the substances represented by SiO_(2),ZrO_(2),and ZrSiO_(4),which could play high viscosity and high strength characteristics to improve anti-erosion ability.The above-mentioned SiC_(f)/SiBCZr composites with corrosion resistance,oxidation resistance,and ablative resistance provided a solid material foundation and technical support for the development of reusable spacecraft hot-end components.

Effects of medium fluid cavitation on fluctuation characteristics of magnetic fluid seal interface in agricultural centrifugal pump

The fluctuation law of magnetic fluid seal interface of an agricultural centrifugal pump is theoretically unknown;the pressure and velocity fluctuations are crucial factors that cause interface fluctuation.In this study,the pressure and velocity fluctuations of the sealing interface on an agricultural centrifugal pump during cavitation were investigated based on the methods of Ansys CFX numerical calculation and experimental verification.The results demonstrated that at the same flow rate,the pressure fluctuation amplitude of the sealing interface decreased gradually from the shaft surface to the bottom of the polar tooth.At different flow rates,the amplitude of the pressure fluctuation decreased with an increase in the flow rate.The cavitation of the medium aggravated the impact and water hammer of the liquid,leading to the occurrence of the jitter phenomenon in the sealing interface to accelerate the fluctuation frequency of the axial velocity of the sealing liquid,which accelerated the emulsification of the magnetic fluid.This law can provide a reference for the design of magnetic fluid sealing devices for agricultural centrifugal pumps.