Second-Order Correlation Function for Asymmetric-to-Symmetric Transitions due to Spectrally Indistinguishable Biexciton Cascade Emission

We report the observed photon bunching statistics of biexciton cascade emission at zero time delay in single quantum dots by second-order correlation function g（2） （T） measurements under continuous wave excitation. It is found that the bunching phenomenon is independent of the biexciton binding energy when it varies from 0.59 meV to nearly zero. The photon bunching takes place when the exeiton photon is not spectrally distinguishable from the biexciton photon, and either of them can trigger the %tart＇ in a Hanbury-Brown and Twiss setup. However, if the exciton energy is spectrally distinguishable from the biexciton, the photon statistics will become asymmetric and a cross-bunching lineshape can be obtained. The theoretical calculations based on a model of three-level rate-equation analysis are consistent with the result of g（2）（τ） correlation function measurements.

Application of Serum Apelin and MMP-9 in Evaluation of Silicosis and Their Correlation with Lung Function

[Objectives]This study was conducted to explore the combination of serum Apelin and MMP-9 in the assessment of silicosis and their correlation with lung function. [Methods] From January 2020 to January 2021, eight patients with silicosis(including 3, 2 and 3 patients with silicosis in stages I, II and III respectively) were selected as the observation group, and eight persons frees of silicosis were selected as the control group during the same period. All patients were detected for serum APJ endogenous ligand(Apelin) of G protein-coupled receptor, matrix metalloproteinase-9(MMP-9) and pulmonary function indexes. The levels of serum Apelin and MMP-9 and lung function in the two groups were compared, and the correlation between serum Apelin and MMP-9 indexes and lung function was analyzed. [Results] The serum Apelin and lung function in the observation group were lower than those in the control group, and the level of MMP-9 in the observation group was higher than that in the control group, and the differences were statistically significant(P<0.05). The MMP-9 index in patients with silicosis in stage III was higher than those in patients with silicosis in stage II and stage I, and the MMP-9 index in patients with silicosis in stage II was higher than that in patients with silicosis in stage I, and the differences were statistically significant(P<0.05). The serum Apelin and lung function indexes of patients with silicosis in stage III were lower than those of patients with silicosis in stage II and stage I, and the serum Apelin and lung function indexes of patients with silicosis in stage II were lower than those of patients with silicosis in stage I, and the differences were statistically significant(P<0.05). The correlation analysis showed a positive correlation between serum Apelin and lung function indexes, and a negative correlation between MMP-9 and lung function indexes. [Conclusions] A lower serum Apelin and a higher MMP-9 value in patients with silicosis indicate severer lung function impairment, and the combined detection of serum Apelin and MMP-9 is conducive to effective evaluation of the disease of silicosis. The serum Apelin index was negatively correlated with silicosis, and the level of MMP-9 was positively correlated with silicosis, which could provide a scientific basis for clinical diagnosis and treatment.

Six New Sets of the Non-Elementary Jef-Family-Functions that Are Giving Solutions to Some Second-Order Nonlinear Autonomous ODEs

In this paper, we define some new sets of non-elementary functions in a group of solutions x(t) that are sine and cosine to the upper limit of integration in a non-elementary integral that can be arbitrary. We are using Abel’s methods, described by Armitage and Eberlein. The key is to start with a non-elementary integral function, differentiating and inverting, and then define a set of three functions that belong together. Differentiating these functions twice gives second-order nonlinear ODEs that have the defined set of functions as solutions. We will study some of the second-order nonlinear ODEs, especially those that exhibit limit cycles. Using the methods described in this paper, it is possible to define many other sets of non-elementary functions that are giving solutions to some second-order nonlinear autonomous ODEs.

Weighted Multi-sensor Data Level Fusion Method of Vibration Signal Based on Correlation Function

As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.

Effect of source size and emission time on the p–p momentum correlation function in the two-proton emission process

The effect of source size and emission time on the proton-proton(p-p)momentum correlation function(Cpp(q))has been studied systematically.Assuming a spherical Gaussian source with space and time profile according to the function S(r,t)~exp(-r2/2 r02-t/τ)in the correlation function calculation code(CRAB),the results indicate that one Cpp(q)distribution corresponds to a unique combination of source size r0 and emission timeτ.Considering the possible nuclear deformation from a spherical nucleus,an ellipsoidal Gaussian source characterized by the deformation parameter∈=ΔR/R has been simulated.There is almost no difference of Cpp(q)between the results of spherically and ellipsoidally shaped sources with small deformation.These results indicate that a unique source size r0 and emission time could be extracted from the p-p momentum correlation function,which is especially important for identifying the mechanism of twoproton emission from proton-rich nuclei.Furthermore,considering the possible existence of cluster structures within a nucleus,the double Gaussian source is assumed.The results show that the p-p momentum correlation function for a source with or without cluster structures has large systematical differences with the variance of r0 andτ.This may provide a possible method for experimentally observing the cluster structures in proton-rich nuclei.

Closed-form steady-state solutions for forced vibration of second-order axially moving systems

Second-order axially moving systems are common models in the field of dynamics, such as axially moving strings, cables, and belts. In the traditional research work, it is difficult to obtain closed-form solutions for the forced vibration when the damping effect and the coupling effect of multiple second-order models are considered.In this paper, Green's function method based on the Laplace transform is used to obtain closed-form solutions for the forced vibration of second-order axially moving systems. By taking the axially moving damping string system and multi-string system connected by springs as examples, the detailed solution methods and the analytical Green's functions of these second-order systems are given. The mode functions and frequency equations are also obtained by the obtained Green's functions. The reliability and convenience of the results are verified by several examples. This paper provides a systematic analytical method for the dynamic analysis of second-order axially moving systems, and the obtained Green's functions are applicable to different second-order systems rather than just string systems. In addition, the work of this paper also has positive significance for the study on the forced vibration of high-order systems.

Correlation Degree and Correlation Coefficient of Multi-Output Functions

We present definitions of the correlation degree and correlation coefficient of multi-output functions. Two relationships about the correlation degree of multi-output functions are proved. One is between the correlation degree and independency, the other is between the correlation degree and balance. Especially the paper discusses the correlation degree of affine multioutput functions. We demonstrate properties of the correlation coefficient of multi-output functions. One is the value range of the correlation coefficient, one is the relationship between the correlation coefficient and independency, and another is the sufficient and necessary condition that two multi-output functions are equivalent to each other.

Parametric Approach for the Normal Luenberger Function Observer Design in Second-order Descriptor Linear Systems

In this paper, the normal Luenberger function observer design for second-order descriptor linear systems is considered. It is shown that the main procedure of the design is to solve a so-called second-order generalized Sylvester-observer matrix equation. Based on an explicit parametric solution to this equation, a parametric solution to the normal Luenberger function observer design problem is given. The design degrees of freedom presented by explicit parameters can be further utilized to achieve some additional design requirements.

Temporal variation of noise correlation function(NCF) in Beijing and surroundings:Its relation with climate events and implications

Noise correlation function （NCF） was calculated using the data of the Beijing Capital-Area Telemetered Digital Seismograph Network from June 12 to September 12, 2005. Signal-to-noise ratio （SNR） is used to characterize the quality of NCF at each station pair. The SNR （in dB） is shown to be dependent on the separation distance R of the station pair via SNR= A -BlogR. ＇Normalized average SNR＇ for all the station pairs can then be calculated, as represented by the value of SNR taking R = 250 km in the empirical SNR-R relation, to measure the overall quality of the NCF result. The ＇normalized average SNR＇ of the NCF shows temporal variation and is apparently dependent on the root-mean-square （RMS） velocity of the microseism. The result obtained by this experiment provides clues to the explanation of the properties of NCF, such as the dominant mechanism underlying （diffuse wave fields or uncorrelated sources）, and the dependence of SNR on the time length of recordings.

Design of Luenberger function observer with disturbance decoupling for matrix second-order linear systems-a parametric approach

A simple method for disturbance decoupling for matrix second-order linear systems is proposed directly in matrix second-order framework via Luenberger function observers based on complete parametric eigenstructure assignment. By introducing the H2 norm of the transfer function from disturbance to estimation error, sufficient and necessary conditions for disturbance decoupling in matrix second-order linear systems are established and are arranged into constraints on the design parameters via Luenberger function observers in terms of the closed-loop eigenvalues and the group of design parameters provided by the eigenstructure assignment approach. Therefore, the disturbance decoupling problem is converted into an eigenstructure assignment problem with extra parameter constraints. A simple example is investigated to show the effect and simplicity of the approach.

MODAL PARAMETERS EXTRACTION WITH CROSS CORRELATION FUNCTION AND CROSS POWER SPECTRUM UNDER UNKNOWN EXCITATION

In most of real operational conditions only response data are measurable while the actual excitations are unknown, so modal parameter must be extracted only from responses. This paper gives a theoretical formulation for the cross-correlation functions and cross-power spectra between the outputs under the assumption of white-noise excitation. It widens the field of modal analysis under ambient excitation because many classical methods by impulse response functions or frequency response functions can be used easily for modal analysis under unknown excitation. The Polyreference Complex Exponential method and Eigensystem Realization Algorithm using cross-correlation functions in time domain and Orthogonal Polynomial method using cross-power spectra in frequency domain are applied to a steel frame to extract modal parameters under operational conditions. The modal properties of the steel frame from these three methods are compared with those from frequency response functions analysis. The results show that the modal analysis method using cross-correlation functions or cross-power spectra presented in this paper can extract modal parameters efficiently under unknown excitation.

An Attempt to Make Non-Elementary Functions That Are Giving Solutions to Some Second-Order Nonlinear Autonomous ODEs

In this paper, we define an exponential function whose exponent is the product of a real number and the upper limit of integration in a non-elementary integral that can be arbitrary. We are using Abel’s methods, described by Armitage and Eberlein. The key is to start with a non-elementary integral function, differentiating and inverting, and then define a set of functions. Differentiating these functions twice give second-order nonlinear ODEs that have the defined set of functions as solutions.

Walsh Spectral Characteristics and the Auto-Correlation Function Characteristics of Forming Orthomorphic Permutations of Multi-Output Functions

Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalized Walsh spectrum of multi-output functions and the auto-correlation function of multi-output functions to investigate the Walsh spectral characteristics and the auto-correlation function characteristics of orthormophic permutations, several results are obtained.

Weak value amplification via second-order correlated technique

We propose a new framework combining weak measurement and second-order correlated technique. The theoretical analysis shows that weak value amplification （WVA） experiment can also be implemented by a second-order correlated system. We then build two-dimensional second-order correlated function patterns for achieving higher amplification factor and discuss the signal-to-noise ratio influence. Several advantages can be obtained by our proposal. For instance, detectors with high resolution are not necessary. Moreover, detectors with low saturation intensity are available in WVA setup. Finally, type-one technical noise can be effectively suppressed.

FROM WAVE FUNCTIONS TO TAU-FUNCTIONS FOR THE VOLTERRA LATTICE HIERARCHY

For an arbitrary solution to the Volterra lattice hierarchy,the logarithmic derivatives of the tau-function of the solution can be computed by the matrix-resolvent method.In this paper,we define a pair of wave functions of the solution and use them to give an expression of the matrix resolvent;based on this we obtain a new formula for the k-point functions for the Volterra lattice hierarchy in terms of wave functions.As an application,we give an explicit formula of k-point functions for the even GUE(Gaussian Unitary Ensemble)correlators.

Influence of Noise on Time Evolution of Intensity Correlation Function

Using the linear approximation method, we have studied how the correlation function C(t) of the laser intensity changes with time in the loss-noise model of the single-mode laser driven by the colored pump noise with signal modulation and the quantum noise with cross-correlation between the real and imaginary parts. We have found that when the pump noise self-correlation time τ changes, (I) in the case ofτ < 1, the C(t) vs. T curve experiences a changing process from the monotonous descending to monotonous rise, and finally to the appearance of a maximum; (ii) in the case of τ > 1, the curve only exhibits periodically surging with descending envelope. When τ < 1 and τ does not change, with the increase of the pump noise intensity P, the curve experiences a repeated changing process, that is, from the monotonous descending to the appearance of a maximum, then to monotonous rise, and finally to the appearance of a maximum again. With the increase of the quantum noise intensity Q, the curve experiences a changing process from the monotonous rise to the appearance of a maximum, and finally to the monotonous descending. The increase of the quantum noise with cross-correlation between the real and imaginary parts will lead to the fall of the whole curve, but not affect the form of the time evolution of C(t).

Simulation study of the two-time intensity correlation function of a two-mode laser system with both pump and quantum noises

This paper investigates the two-time intensity correlation function of a two-mode ring laser system subjected to both pump and quantum noises by stochastic simulation. It finds that the decay rate of the intensity correlation function of one mode gets faster with decreasing values of relevant parameters, i.e., the coupling constant ξ, the cross-correlation coefficient A, the difference of the pump parameters Aa and the pump parameter al; however, its variations get complex in the other mode when relevant parameters are changed. The investigating results also show that the effects of the mode competition on intensity correlation function are obvious.

Cognitive dysfunction in schizophrenia patients caused by downregulation of γ-aminobutyric acid receptor subunits

BACKGROUND The expression pattern of gamma aminobutyric acid(GABA)receptor subunits are commonly altered in patients with schizophrenia,which may lead to nerve excitation/inhibition problems,affecting cognition,emotion,and behavior.AIM To explore GABA receptor expression and its relationship with schizophrenia and to provide insights into more effective treatments.METHODS This case-control study enrolled 126 patients with schizophrenia treated at our hospital and 126 healthy volunteers who underwent physical examinations at our hospital during the same period.The expression levels of the GABA receptor subunits were detected using 1H-magnetic resonance spectroscopy.The recognized cognitive battery tool,the MATRICS Consensus Cognitive Battery,was used to evaluate the scores for various dimensions of cognitive function.The correlation between GABA receptor subunit downregulation and schizophrenia was also analyzed.RESULTS Significant differences in GABA receptor subunit levels were found between the case and control groups(P<0.05).A significant difference was also found between the case and control groups in terms of cognitive function measures,including attention/alertness and learning ability(P<0.05).Specifically,as the expression levels of GABRA1(α1 subunit gene),GABRB2(β2 subunit gene),GABRD(δsubunit),and GABRE(εsubunit)decreased,the severity of the patients’condition increased gradually,indicating a positive correlation between the downregulation of these 4 receptor subunits and schizophrenia(P<0.05).However,the expression levels of GABRA5(α5 subunit gene)and GABRA6(α6 subunit gene)showed no significant correlation with schizophrenia(P>0.05).CONCLUSION Downregulation of the GABA receptor subunits is positively correlated with schizophrenia.In other words,when GABA receptor subunits are downregulated in patients,cognitive impairment becomes more severe.

Spin-correlation function of the fully frustrated Ising model and ±J Ising spin glass on a square lattice

In this work we study the correlation function of the ground state of a two-dimensional fully frustrated Ising model as well as spin glass. The Pfaffian method is used to calculate free energy and entropy as well as the correlation function. We estimate the exponent of spin correlation function for the fully frustrated model and spin glass. In this paper an overview of the latest results on the spin correlation function is presented.

Improvement of a new rotation function for molecular replacement by designing new scoring functions and dynamic correlation coefficient

A previously published new rotation function has been improved by using a dynamic correlation coefficient as well as two new scoring functions of relative entropy and mean-square-residues to make the rotation function more robust and independent of a specific set of weights for scoring and ranking. The previously described new rotation function calculates the rotation function of molecular replacement by matching the search model directly with the Patterson vector map. The signal-to-noise ratio for the correct match was increased by averaging all the matching peaks. Several matching scores were employed to evaluate the goodness of matching. These matching scores were then combined into a single total score by optimizing a set of weights using the linear regression method. It was found that there exists an optimal set of weights that can be applied to the global rotation search and the correct solution can be ranked in the top 100 or less. However, this set of optimal weights in general is dependent on the search models and the crystal structures with different space groups and cell parameters. In this work, we try to solve this problem by designing a dynamic correlation coefficient. It is shown that the dynamic correlation coefficient works for a variety of space groups and cell parameters in the global search of rotation function. We also introduce two new matching scores： relative entropy and mean-square-residues. Last but not least, we discussed a valid method for the optimization of the adjustable parameters for matching vectors.