Secondary Stress State around the Bored Hole in Salt Strata

In Romania, rendering the oil structures evident in the deep strata （= 6,000 m） is conditioned by the penetration of some salt deposits of appreciable thickness （500-3,000 m） situated above the structures with petroleum potential. Crossing by the drilling of these salt deposits constitutes a major risk factor both in achievement （drilling, cementing） and afterwards, to ensure the stability-reliability of the wells. Based on these reasons, the researches have been focused on： the study of salt behavior deformation, establishment of the required parameters to ensure the stability of the drillings until the bore-hole lining （especially the secondary stress state around the drilling, the density of the drilling fluid in correlation with the temperature and respectively the depth） and also after casing （type of the cement pastes, the nature, the quality and the dimensions of pipes）, namely the reliability of the wells.

Prevalence and Social Demographic Factors Associated with Secondary Traumatic Stress, Burnout and Compassion Satisfaction among Nurses at Selected Teaching Hospitals in Lusaka, Zambia

Introduction: Nurses’ constant exposure to severe human suffering within constrained health care environments places them at risk for developing Secondary Traumatic Stress and Burnout. The current study therefore sought to establish the prevalence and social demographic factors associated with Secondary Traumatic Stress, Burnout and Compassion Satisfaction among Nurses working at selected Teaching Hospitals in Lusaka, Zambia. Methods: A correlational design employing a self-administered questionnaire adapted from version five of the Professional Quality of Life scale was used to collect data from 250 nurses drawn using proportional stratified sampling method. The resulting data were analyzed using version 23 of the Statistical Package for Social Sciences (SPSS). Hierarchical multiple linear regression analysis was used to identify predictors of Secondary Traumatic Stress and Burnout. Findings: Whilst the majority of respondents reported average levels of Secondary Traumatic Stress and Burnout, about a quarter reported high Secondary Traumatic Stress and Burnout scores at 23% and 26% respectively. Only 81 (32.4%) scored high on Compassion Satisfaction. Social demographic factors including;working in the main Intensive Care Unit, and being married accounted for the greatest variance in Secondary Traumatic Stress (R2 = 0.237, p Conclusion: Findings of the current study signify a need to institute measures to help nurses cope with the deleterious psychological effects of constant engagement with those in distress and to foster Compassion Satisfaction.

Self-Compassion and Empathy: Impact on Burnout and Secondary Traumatic Stress in Medical Training

Objective: To determine how self-compassion and empathy might influence the degree of burnout, secondary traumatic stress and compassion satisfaction among medical students and residents. Methods: Cross-sectional survey of medical students and select residency programs at Henry Ford Hospital in Detroit, Michigan. Respondents completed the Professional Quality of Life Scale (burnout, secondary traumatic stress and compassion satisfaction), Neff’s Self-Compassion Scale, and the empathic concern and personal distress subscales of the Interpersonal Reactivity Index. Results: The response rate was 28.6%. 23.9% and 27.3% of medical trainees reported high levels of burnout and secondary traumatic stress, respectively. Females reported greater empathy but lower self-compassion than males. Greater concern for others and oneself and lower personal distress predicted greater pleasure derived from professional work. Less concern for others and lower concern for oneself predicted greater burnout. Conclusions: Compassion for oneself and for others within their care appears to ameliorate burnout and can increase professional satisfaction. Initiatives to foster empathy and self-compassion may enhance individual well-being.

Reflection:A Critical Look at Escaping Secondary Traumatic Stress Experienced by Law Enforcement Officers

Despite the stigma that is associated with law enforcement officers receiving mental health resources and treatment to combat secondary traumatic stress,it is widely the most effective form for recovery and having a fulfilling career.Law enforcement officers are superheroes and,they are known for saving the day.That is why it is critical for mental health offerings to be normalized in law enforcement agencies and constant evaluation of the psychological and cognitive well-being of officers.Unfortunately,the stress of the profession will not go away,but having resources and incentives to address several factors that officers face will assist with their overall feeling about the important work they do.As such,it is recommended that law enforcement agencies adopt programs to treat secondary traumatic stress,such as Critical Incident Stress Debriefing,Peer-Support Program,and Crisis Intervention Team.While there is no perfect program,these programs are designed to reduce the risk of serious injury or death during an emergency interaction between citizens and law enforcement officers.Ultimately,it is the responsibility of those charged with protecting law enforcement officers to understand the stress and how it affects the mind and body of those officers in managing life,work,and citizens.

Identification of novel cis-elements bound by BplMYB46 involved in abiotic stress responses and secondary wall deposition

Transcription factors （TFs） play vital roles in various biological processes by binding to cis-acting elements to control expressions of their target genes. The MYB TF BplMYB46, from Betula platyphylla, is involved in abiotic stress responses and secondary wall deposition. In the present study, we used a TF-centered yeast onehybrid technology （TF-centered YIH） to identify the cis- acting elements bound by BplMYB46. We screened a shortinsert random library and identified three cis-elements bound by BplMYB46： an E-box （CA（A/T/C）（A/G/C）TG） and two novel motifs, a TO-box （T（GIA）TCG（C/G）） and a GT-box （A（G/T）T（AIC）GT（T/G）C）. Chromatin immunoprecipitation （CHIP） and effector-reporter coexpression assays inNicotiana tabacum confirmed binding of BplMYB46 to the TC-box, GT-box, and E-box motifs in the promoters of the phenylalanine ammonia lyase （PAL）, peroxidase （POD）, and superoxide dismutase （SOD） genes, which function in abiotic stress tolerance and secondary wall biosynthesis. This finding improves our understanding of potential regulatory mechanisms in the response to abiotic stress and secondary wall deposition of BplMYB46 in B. platyphylla.

Technology of back stoping from level floors in gateway and pillar mining areas of extra-thick seams

According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical simulation and theoretical analysis are ccsed to investigate the compaction characteristics of cavities under stress as well as an appropriate mining height of the primary-mining layer based on dif- ferent mining widths and pillar widths. For Yangjian coal mine, the mining thickness of the first seam during back stoping from level floor is determined to be 3 m, which meets the relevant requirements. Gateway-and-pillar goaf of a single layer has a range of influence of 9 m vertically. If gateway-and-pillar goaf occurs both in 9-1 and 9-5 layers, the range is extended to within 11.2 m. When the mining width of a gateway is less than 2 m or larger than 5 m, the gateway-and-pillar goal in the upper layer of the primary-mining seam can be filled in and compacted after stoping. When the working face is 2 m away from the gateway and pillar before entering into it and after passing through it, the coal body under the gateway and pillar is subjected to relatively high stress. During mining of the upper layer, moreover, the working face should interlock the goaf in primary-mining layer for 20 m.

Flow and Heat Transfer Characteristics in Rotating Two-pass Channels Cooled by Superheated Steam

In a modern gas turbine,using superheated steam to cool the vane and blade for internal convection cooling is a promising alternative to traditional compressor air.However,further investigations of steam cooling need to be performed.In this paper,the three-dimensional flow and heat transfer characteristics of steam are numerically investigated in two-pass square channels with 45° ribbed walls under stationary and rotating conditions.The investigated rotation numbers are 0 and 0.24.The simulation is carried out by solving the Reynolds averaged Navier-Stokes equations employing the Reynolds stress turbulence model,especially considering two additional terms for Coriolis and rotational buoyancy forces caused by the rotating effect.For comparison,calculations for the air-cooled channels are done first at a Reynolds number of 25 000 and inlet coolant-to-wall density ratio of 0.13.The results are compared with the experiment data.Then the flow and heat transfer in steam-cooled channels are analyzed under the same operating conditions.The results indicate that the superheated steam has better heat transfer performance than air.Due to the combined effect of rotation,skewed ribs and 180° sharp turn,the secondary flow pattern in steam-cooled rotating two-pass channels is quite complex.This complex secondary flow pattern leads to strong anisotropic turbulence and high level of anisotropy of Reynolds stresses,which have a significant impact on the local heat transfer coefficient distributions.