Depositional Environment of Sediments in Tonle Sap Sedimentary Basin, Western Part of Cambodia: Insights from Field and Geochemical Studies

Tonle Sap sedimentary basin was considered a favorable geological condition for hydrocarbon accumulation in the onshore Cambodia. Two exposure outcrops in Battambang province, called Somlout and Takream, were selected to represent sediments in this basin. The sedimentology and geochemistry studies provide insights into the depositional environment of sediments using field investigation, lithological, sedimentological, paleontological, and geochemical analysis. The redox condition, water column, and depositional setting were analyzed by plotting the ratio of V vs. Cr, Uauthigenic vs. V/Cr, Sr vs. Ba, Ca vs. (Fe + Ca), and Fe2O3/TiO2 vs. Al2O3/(Al2O3 + Fe2O3) diagram. Moreover, these diagrams can be used to predict depositional conditions as well. Based on the results, Somlout and Takream comprise calcareous shale and limestone facies. The geochemical analysis showed that Somlout calcareous shale samples were deposited in the dysoxic freshwater of the lake setting during the regression, while Somlout limestones and Takream were deposited in high salinity seawater, oxic condition of shallow-marine water. In addition, Somlout limestones consist of fragmental fusulinid foraminifera, bivalve shelve, and bryozoan, which suggest a barrier environment. Meanwhile, Teakream consists of fine-grained calcareous shale, and lime-mudstone, which are presented to form in the quiet marine setting of the lagoon environment. Therefore, the Tonle Sap basin sediments were deposited in the Somlout area’s barrier and lake environment, and the lagoon environment for Takream.

Basic Types and Structural Characteristics of Uplifts:An Overview of Sedimentary Basins in China

The uplift is a positive structural unit of the crust. It is an important window for continental dynamics owing to its abundant structural phenomena, such as fault, fold, unconformity and denudation of strata. Meanwhile, it is the very place to store important minerals like oil, natural gas, coal and uranium. Giant and large-scale oil and gas fields in China, such as the Daqing Oilfield, Lunnan-Tahe Oilfield, Penglai 19-3 Oilfield, Puguang Gas Field and Jingbian Gas Field, are developed mainly on uplifts. Therefore, it is the main target both for oil and gas exploration and for geological study. The uplift can be either a basement uplift, or one developed only in the sedimentary cover. Extension, compression and wrench or their combined forces may give rise to uplifts. The development process of uplifting, such as formation, development, dwindling and destruction, can be taken as the uplifting cycle. The uplifts on the giant Precambrian cratons are large in scale with less extensive structural deformation. The uplifts on the medium- and small-sized cratons or neo-cratons are formed in various shapes with strong structural deformation and complicated geological structure. Owing to changes in the geodynamic environment, uplift experiences a multi-stage or multi-cycle development process. Its geological structure is characterized in superposition of multi-structural layers. Based on the basement properties, mechanical stratigraphy and development sequence, uplifts can be divided into three basic types-the succession, superposition and destruction ones. The succession type is subdivided into the maintaining type and the lasting type. The superposition type can be subdivided into the composite anticlinal type, the buried-hill draped type, the faulted uplift type and the migration type according to the different scales and superimposed styles of uplifts in different cycles. The destruction type is subdivided into the tilting type and the negative inverted type. The development history of uplifts and their controlling effects on sedimentation and fluids are quite different from one another, although the uplifts with different structural types store important minerals. Uplifts and their slopes are the main areas for oil and gas accumulation. They usually become the composite oil and gas accumulation zones （belts） with multiple productive formations and various types of oil and gas reservoirs.

Meso-Cenozoic Evolution of the Tanlu Fault and Formation of Sedimentary Basins

Abstract: There are a group of large and medium-scale Meso-Cenozoic petroliferous basins along both sides of the Tanlu fault or within the fault zone, e.g., the Songliao basin, the Bohai Bay basin and the Subei-Yellow Sea basin. As shown by studies of the structural types, sedimentary formations, volcanic activities, tectonic evolution as well as the time-space relationship between the Tanlu fault zone and the basins, the formation and distribution of the basins are controlled by the movement of the Tanlu fault. This paper presents an analysis of the tectono-geometric, kinematic and geodynamic features of the basins on the basis of integrated geological-geophysical data, and an exploration into the internal relations between the fault and the basins as well as the formation mechanism and geodynamic processes of the basins.

Biodegradation and origin of oil sands in the Western Canada Sedimentary Basin

The oil sands deposits in the Western Canada Sedimentary Basin （WCSB） comprise of at least 85% of the total immobile bitumen in place in the world and are so concentrated as to be virtually the only such deposits that are economically recoverable for conversion to oil. The major deposits are in three geographic and geologic regions of Alberta： Athabasca, Cold Lake and Peace River. The bitumen reserves have oil gravities ranging from 8 to 12° API, and are hosted in the reservoirs of varying age, ranging from Devonian （Grosmont Formation） to Early Cretaceous （Mannville Group）. They were derived from light oils in the southern Alberta and migrated to the north and east for over 100 km during the Laramide Orogeny, which was responsible for the uplift of the Rocky Mountains. Biodegradation is the only process that transforms light oil into bitumen in such a dramatic way that overshadowed other alterations with minor contributions. The levels of biodegradation in the basin increasing from west （non-biodegraded） to east （extremely biodegraded） can be attributed to decreasing reservoir temperature, which played the primary role in controlling the biodegradation regime. Once the reservoir was heated to approximately 80℃, it was pasteurized and no biodegradation would further occur. However, reservoir temperature could not alone predict the variations of the oil composition and physical properties. Compositional gradients and a wide range ofbiodegradation degree at single reservoir column indicate that the water-leg size or the volume ratio of oil to water is one of the critical local controls for the vertical variations ofbiodegradation degree and oil physical properties. Late charging and mixing of the fresh and degraded oils ultimately dictate the final distribution of compositions and physical properties found in the heavy oil and oil sand fields. Oil geochemistry can reveal precisely the processes and levels that control these variations in a given field, which opens the possibility of model-driven prediction of oil properties and sweet spots in reservoirs.

Basin Fluid Mineralization during Multistage Evolution of the Lanping Sedimentary Basin,Southwestern China

The Lanping sedimentary basin has experienced a five-stage evolution since the late Paleozoic： ocean-continent transformation （late Paleozoic to early mid-Triassic）; intracontinental rift basin （late mid-Triassic to early Jurassic）; down-warped basin （middle to late Jurassic）; foreland basin （Cretaceous）; and strike-slip basin （Cenozoic）. Three major genetic types of Ag-Cu polymetallic ore deposits, including the reworked hydrothermal sedimentary, sedimentary-hydrothermally reworked and hydrothermal vein types, are considered to be the products of basin fluid activity at specific sedimentary-tectonic evolutionary stages. Tectonic differences of the different evolutionary stages resulted in considerable discrepancy in the mechanisms of formation-transportation, migration direction and emplacement processes of the basin fluids, thus causing differences in mineralization styles as well as in genetic types of ore deposit.

Structural Characteristics and Formation Dynamics: A Review of the Main Sedimentary Basins in the Continent of China

The formation and evolution of basins in the China continent are closely related to the collages of many blocks and orogenic belts. Based on a large amount of the geological, geophysical, petroleum exploration data and a large number of published research results, the basement constitutions and evolutions of tectonic-sedimentary of sedimentary basins, the main border fault belts and the orogenesis of their peripheries of the basins are analyzed. Especially, the main typical basins in the eight divisions in the continent of China are analyzed in detail, including the Tarim, Ordos, Sichuan, Songliao, Bohai Bay, Junggar, Qiadam and Qiangtang basins. The main five stages of superimposed evolutions processes of basins revealed, which accompanied with the tectonic processes of the Paleo-Asian Ocean, Tethyan and Western Pacific domains. They contained the formations of main Cratons （1850-800 Ma）, developments of marine basins （800-386 Ma）, developments of Marine- continental transition basins and super mantle plumes （386-252 Ma）, amalgamation of China Continent and developments of continental basins （252-205 Ma） and development of the foreland basins in the western and extensional faulted basin in the eastern of China （205~0 Ma）. Therefore, large scale marine sedimentary basins existed in the relatively stable continental blocks of the Proterozoic, developed during the Neoproterozoic to Paleozoic, with the property of the intracontinental cratons and peripheral foreland basins, the multistage superimposing and late reformations of basins. The continental basins developed on the weak or preexisting divisional basements, or the remnant and reformed marine basins in the Meso-Cenozoic, are mainly the continental margins, back-arc basins, retroarc foreland basins, intracontinental rifts and pull-apart basins. The styles and intensity deformation containing the faults, folds and the structural architecture of regional unconformities of the basins, responded to the openings, subductions, closures of oceans, the continent-continent collisions and reactivation of orogenies near the basins in different periods. The evolutions of the Tianshan-Mongol-Hinggan, Kunlun-Qilian-Qinling-Dabie-Sulu, Jiangshao-Shiwandashan, Helanshan-Longmengshan, Taihang-Wuling orogenic belts, the Tibet Plateau and the Altun and Tan- Lu Fault belts have importantly influenced on the tectonic-sedimentary developments, mineralization and hydrocarbon reservoir conditions of their adjacent basins in different times. The evolutions of basins also rely on the deep structures of lithosphere and the rheological properties of the mantle. The mosaic and mirroring geological structures of the deep lithosphere reflect the pre-existed divisions and hot mantle upwelling, constrain to the origins and transforms dynamics of the basins. The leading edges of the basin tectonic dynamics will focus on the basin and mountain coupling, reconstruction of the paleotectonic-paleogeography, establishing relationship between the structural deformations of shallow surface to the deep lithosphere or asthenosphere, as well as the restoring proto-basin and depicting residual basin of the Paleozoic basin, the effects of multiple stages of volcanism and paleo- earthquake events in China.

Geological Features of Devonian Sedimentary Basins in South China and Their Deposition and Mineralization

The Devonian succession in South China is well-known for its complete development, vari-fied sedimentary types, remarkable lithofacies variation and abundant mineral resources. The South China plate was formed by the collision and collage of the Yangtze plate and the Cathaysian plate. The collision began approximately at the Jinningian stage and the collage was not finalized until the Guangxian movement. It was on the South China plate with a somewhat different nature of the basement that the Devonian deposition formed.

The Type and Evolution of Neoproterozoic Sedimentary Basin in the Dahongshan Region,Northern Margin of the Yangtze Block:An Insight from Sedimentary Characteristics of the Huashan Group

Objective The Huashan group（composed of the lower Hongshansi Formation and the upper Liufangzui Formation）is an important Neoproterozoic stratigraphic unit along the northern margin of the Yangtze Block.Previous documents have focused on the geochronological and geochemical aspects of the Neoproterozoic sedimentary basin in the Dahongshan region.However.

Sedimentology and Ichnology of Upper Montney Formation Tight Gas Reservoir, Northeastern British Columbia, Western Canada Sedimentary Basin

Several decades of conventional oil and gas production in Western Canada Sedimentary Basin (WCSB) have resulted in maturity of the basin, and attention is shifting to alternative hydrocarbon reservoir system, such as tight gas reservoir of the Montney Formation, which consists of siltstone with subordinate interlaminated very fine-grained sandstone. The Montney Formation resource play is one of Canada’s prime unconventional hydrocarbon reservoir, with reserve estimate in British Columbia (Natural Gas reserve = 271 TCF), Liquefied Natural Gas (LNG = 12,647 million barrels), and oil reserve (29 million barrels). Based on sedimentological and ichnological criteria, five lithofacies associations were identified in the study interval: Lithofacies F-1 (organic rich, wavy to parallel laminated, black colored siltstone);Lithofacies F-2 (very fine-grained sandstone interbedded with siltstone);Lithofacies F-3A (bioturbated silty-sandstone attributed to the Skolithos ichnofacies);Lithofacies F-3B (bioturbated siltstone attributed to Cruziana ichnofacies);Lithofacies F-4 (dolomitic, very fine-grained sandstone);and Lithofacies F-5 (massive siltstone). The depositional environments interpreted for the Montney Formation in the study area are lower shoreface through proximal offshore to distal offshore settings. Rock-Eval data (hydrogen Index and Oxygen Index) shows that Montney sediments contains mostly gas prone Type III/IV with subordinate Type II kerogen, TOC ranges from 0.39 - 3.54 wt% with a rare spike of 10.9 wt% TOC along the Montney/Doig boundary. Vitrinite reflectance data and Tmax show that thermal maturity of the Montney Formation is in the realm of “peak gas” generation window. Despite the economic significance of the Montney unconventional “resource-play”, however, the location and predictability of the best reservoir interval remain conjectural in part because the lithologic variability of the optimum reservoir lithologies has not been adequately characterized. This study presents lithofacies and ichnofacies analyses of the Montney Formation coupled with Rock-Eval geochemistry to interpret the sedimentology, ichnology, and reservoir potential of the Montney Formation tight gas reservoir in Fort St. John study area (T86N, R23W and T74N, R13W), northeastern British Columbia, western Canada.

Extensional Tectonics, Rifting, Formation of Sedimentary Basins, Cretaceous Volcanism, Emplacement of Dyke Swarms and Development of Hydrocarbon Pools: Case Studies from Peninsular India and Indian Ocean Region

Prolonged extensional regime in peninsular India resulted in formation of rift and grabens,elongated basins and Gondwana sedimentation along them.Downward progression of rift related faults caused decompression

Geothermal Model of the Fore-Yenisey Sedimentary Basin——Transitional Structure between the Ancient Siberian Platform and the Young West Siberian Plate

Results of the investigation into the geothermal regime of the Fore-Yenisey sedimentary basin, formed during the collision and subsidence of the Kas-Turukhan microcontinent and the western margin of the Siberian craton in the late Neoproterozoic and early Paleozoic are reported. It was established that the structural and geothermal conditions of the upper Precambrian–Paleozoic sections are similar to those in the western regions of the Siberian platform and are characterized by rather low geothermal gradients(12.5–25.5 ℃/km). In the western parts of the basin, formation temperatures in the uppermost pre-Jurassic sediments are 50℃–85℃, decreasing eastward to 30℃–55℃. For the first time, the detailed geothermal model of the basin sedimentary fill was developed. This model allows predictions of the geothermal conditions of Earth’s interior.

Classification and exploration potential of sedimentary basins based on the superposition and evolution process of prototype basins

Classification,superimposed evolution and sedimentary filling of prototype basins are analyzed based on the Wilson cycle principle of plate theory,by dissecting the evolution history of 483 sedimentary basins around the world since the Pre-cambrian,combined with the three stress environments of tension,compression and shear.It is found that plate tectonic evo-lution controls the superimposed development process and petroleum-bearing conditions of the prototype basins in three as-pects:first,more than 85%of the sedimentary basins in the world are developed from the superimposed development of two or more prototype basins;second,the superposition evolution process of the prototype basin takes Wilson cycle as the cycle and cycles in a fixed trajectory repeatedly.In each stage of a cycle,a specific type of prototype basin can be formed;third,each prototype basin can form a unique tectonic-sedimentary system,which determines its unique source,reservoir,cap conditions etc.For hydrocarbon accumulation,the later superimposed prototype basin can change the oil and gas accumulation conditions of the earlier prototype basin,and may form new petroleum systems.Based on this,by defining the type of a current basin as its prototype basin formed by the latest plate tectonic movement,14 types of prototype basins can be classified in the world,namely,intracontinental growth rift,intr acontinental aborted rift,intercontinental rift,passive continental margin,interior craton,trench,fore-arc rift,ba ck-arc rift,back-arc de pression,back-arc small ocean,peri pheral foreland,back-arc foreland,strike-slip pull-apart,and strike-slip flexural basins.The classification scheme can ensure the uniqueness of the types of in di-vidual sedimentary basin,and make it possible to predict their oil and gas potential scientifically through analogy.

The scattering of plane P1 wave by a 3-D sedimentary basin in a fluid-saturated poroelastic half-space using IBEM

The indirect boundary element method(IBEM)is applied to investigate the scattering of elastic waves around a 3-D sedimentary basin filled with fluid-saturated poroelastic medium.Based on this method,the free field and scattered field can be solved according to the boundary conditions.And the numerical accuracy has been verified.The effects of parameters on elastic wave scattering are studied,such as boundary condition,incident frequency,incident angle and porosity of medium.Numerical results illustrate that the amplification effect of surface displacement near poroelastic sedimentary basin is notable.In addition,for the case of large porosity the drainage condition has a significant impact on the response amplitude.Due to the fluid exchange at the interface under the drained condition,the displacement amplitude can be much larger than that under the undrained condition in present study.The study can provide a theoretical basis for the anti-seismic design of engineering structures located in sedimentary basin.

Stratigraphic Data and Groundwater Resources in the Coastal Sedimentary Basin of the Pointe-Noire Region (Republic of Congo)

The synthesis of geological and petroleum research undertaken in the coastal Sedimentary Basin of the Pointe-Noire region enabled the establishment of a lithostratigraphic scale. It has been observed that the order in which the series observed in outcrop and those encountered by deep wells succeed each other has allowed a value to be given to this relative scale. The study area corresponds to a longitudinal tectonic accident, fault or flexure. It belongs to the Cretaceous and Tertiary coastal sedimentary basin covered by the Plio-Pleistocene age formations (series of circuses), formed of highly permeable sands comprising multiple resistant horizons that store large bodies of water whose reserves are considered very important. Hydrographic network is composed of four main basins with a mediocre size. The quality of this groundwater is considered to be satisfactory for household consumption, but the sustainable management of these reserves requires constant checks on their quality as well as on the level of the reserves. All these resources put the agglomeration of Pointe-Noire close to large exploitable water reserves that meet the need for drinking water, even if, on the whole, the agglomeration is still experiencing many difficulties in terms of its drinking water supply.

Applications of Natural Radiation-Induced Paramagnetic Defects in Quartz to Exploration in Sedimentary Basins

Quartz grains in contact with uranium-bearing minerals or fluids are characterized by natural radiation-induced paramagnetic defects （e. g. , oxygen vacancy centers, silicon vacancy centers, and peroxy radicals）, which are amenable to study by electron paramagnetic resonance （EPR） spectroscopy. These natural radiation-induced paramagnetic defects, except for the oxygen vacancy centers, in quartz are concentrated in narrow bands penetrated by α particles： （1） in halos around U- and Th-bearing mineral inclusions and （2） in outer rims or along fractures. The second type of occurrence provides information about uranium mineralization or remobilization （i. e. , sources of uranium, timing of mineralization or remobilization, pathways of uranium-bearing fluids）. It can also be used to evaluate sedimentary basins for potential of uranium mineralization. In particular, the peroxy radicals are stable up to 800℃ and, therefore, are useful for evaluating metasedimentary rocks （e. g. , Paleoproterozoic metasedimentary sequences in the central zone of the North China craton）. EPR study of the Changcheng Series can focus on quartz from the sediment-basement unconformity and faults to determine the presence and types of natural radiation-induced paramagnetic defects, with which to identify and prioritize uranium anomalies. Other potential applications of natural radiation-induced paramagnetic defects in quartz include uranium-bearing hydrocarbon deposits in sedimentary basins. For example, the Junggar, Ordos, and Tarim basins in northwestern China all contain important oil and natural gas fields and are well known for elevated uranium concentrations, including economic sandstone-hosted uranium deposits. Therefore, systematic studies on the distribution of natural radiation-induced paramagnetic defects in quartz from host sedimentary sequences are expected to provide information about the migration of oil and natural gas in those basins.

Fractional Crystallization and Crustal Contamination of Doleritic and Trachytic Dykes Crosscutting the Cretaceous Sedimentary Basins from Figuil (North Cameroon) and Léré(South-Western Chad): Geodynamic Implications

Magmatism in the Cretaceous sedimentary basins of the Figuil and Léré regions constitutes one of the fundamental parameters in the reconstruction of the history of the Cretaceous sedimentary basins. The main objective of this paper is to constrain the petrogenetic processes of hypovolcanic rocks and to determine their geodynamic context of emplacement. The petrographic study of mafic hypovolcanic and trachytic rocks was carried out under a polarizing microscope on thin sections. For the geochemical study, the major oxides and some trace elements were analyzed by ICP-AES. Trace and rare earth elements were analyzed by ICP-MS. The dolerites of the Cretaceous sedimentary basins are composed of dykes of amphibole bearing dolerites, biotite and pyroxene bearing dolerite, pyroxene bearing dolerites and trachytes. The dykes are in the order of 20 to 100 m wide by several kilometers long and oriented from N23°E to N90°E. The textures of these rocks are sub-ophitic to intergranular for dolerites and trachytic for evolved rocks (trachytes). The geochemical study shows that the dolerites are basaltic in composition with alkaline to subalkaline character. The sampled dykes have an evolution dominated by fractional with the minor impact of the crustal assimilation characterized by low Rb/Y ratios for dolerites (0.36 - 0.97) and high values of Rb/Y for the Pan-African granitoids’ samples (1.95 - 4.01). The nature of doleritic and trachytic magma sources is supported by their (Tb/Yb)N > 1.9 (1.91 - 3.79) and Dy/Yb > 2 (2.32 - 3.50) ratios of most samples, which suggests melting in a garnet-bearing mantle. Concerning the geodynamic context of the studied rocks, doleritic samples are classified as within-plate tholeiite and volcanic arc basalt, and within-plate alkali basalts.

Geothermal Regime,Thermal History and Hydrocarbon Generation Types of Sedimentary Basins in the Continental Area of China

The thermal regimes in sedimentary basins in the continental area of China are varied and reflect differences in geological settings. As a result of these variable thermal regimes, the history of hydrocarbon generation in each basin is also different. An east-west profile of the thermal threshold across the continental basins of China, like the Liaohe Basin, the North China Basin, the Ordos Basin, the Qaidam Basin and the Tarim Basin, was constructed using large numbers of heat flow measurements, temperature data and rock thermophysical parameters. Isotherms, surface heat flow, mantle heat flow and Moho temperature beneath the basins are shown in the profile, which illustrates changes in some thermal characteristics between basins in east China and those in west China. Thermal evolution histories in basins were reconstructed using Easy%Ro method, apatite fission track annealing and other paleothermometers. Typical hydrocarbon generation histories of the primary source rocks were modeled by referring to the thermal evolution data. Thermal stages controlled source rocks maturation and oil and gas generation, and influenced the type of hydrocarbon (oil and gas) production in the basins.

Bioherm Petroleum Reservoir Types and Features in Main Sedimentary Basins of the South China Sea

It is known from macrocomparisons and microresearches of bioherm reservoirs in main sedimentary basins of the South China Sea through deep-water petroleum explorations and by means of 2D/3D seismic data and a whole-coring core from the Xisha Islands that there are great dif- ferences between deep-sea oil and gas fields in the world and those in the South China Sea, as reservoir systems of the former are mainly clastic rocks, whereas the latter have organic reefs that act as reser- voirs of their largest oil and gas fields, which are represented by large Liuhua 11-1 reef oilfield in the north and super-large L reef gas field in the south of the South China Sea. Therefore, it is of great significance to study deep-water hioherm reservoirs in the South China Sea. Comparisons of organic reefs in the four large islands of the South China Sea give evidences that such reefs in main sedimentary basins came into being during Cenozoic, especially in Neogene, and mainly occur as tower （point） reef, massive reef, platform-edge reef, and patch reef in shape, which show different reservoir physical properties and seismic reflection configurations and make up carbonate rock-bioherm formations in the island reef and sedimentary basin areas. Generally, the south and north parts differ from the east and the west of the South China Sea in geologic conditions, as their corresponding continental shelf/island shelf areas are relatively wide/ narrow, large stream current systems are well developed/not so well developed, and terrigenous sediments are relatively sufficient/insufficient. The southeast and south parts of the South China Sea had organic reefs built up earlier than the north and the reef building mainly took place in Neogene; these Neogene organic reefs all be- long to plant algal reef rocks. Liuhua oilfield in the Pearl River Mouth basin is found to mainly have red algal bindstone, Malampaya reef in the northern Palawan basin is rich in both red algal bind- stone and green algal reef segmented rock, and especially Miocene red algal framestone and green algal segmented rock are discovered in the Xisha Islands. These algal reefs created different sedimentary mi- crofacies as well as various rock structures and types, and through recent researches on the mechanism of dolomitization, freshwater dolomite was discovered and grouped under products from dolomitization in mixed water that was regression reefal dolomite of good reservoir properties.