ACCUMULATOR的风险定量问题研究

以深南电与国际投行对赌原油价格的ACCUMULATOR合约为典型案例,通过对此复杂的结构期权重新进行分解和组合,构造出能用布莱克-斯科尔斯模型计算的新期权组合,并具体给出ACCUMULATOR的一种风险定量计算方法。

累计认购期权(Accumulator)理财产品若干法律问题研究

累计认购期权(Accumulator)是发行人向投资人销售的金融衍生品,投资者实际上是和银行在做对赌,银行终是赢家。在境外此种产品是禁止向公民个人零售的。境外银行在大陆销售Accumulato时存在严重的欺诈行为。大陆对Accumulator有金融监管权但没有民事司法管辖权,中国银监会、中国证监会应当与香港金管局、证券及期货事务监察委员会进行协调,促使香港当局出面解决问题。投资人也可以在香港提起民事诉讼或仲裁,要求境外银行赔偿损失。境外银行应当主动担当,对投资人做出赔偿。

Characteristics of Cd uptake and accumulation in two Cd accumulator oilseed rape species

Two pot experiments were conducted under greenhouse conditions to investigate the characteristics of Cd uptake and accumulation by two Cd accumulator oilseed rape varieties and one Indian mustard grown on a loamy soil that had been artificially contaminated by different amounts of CdSO\-4(0, 20, 40, 60, 80, 100 mg/kg soil). The relationship between shoot Cd uptake of the two oilseed rape cultivars and the soil Cd concentrations could be simulated via quadratic equations. The curve showed that maximum shoot Cd uptake of Indian mustard was 314.7 μg/pot at soil Cd concentration of 87.8 mg/kg, while maximum uptake of the variety Xikou Huazi was 543.3 μg/pot at soil Cd concentration of 69.1 mg/kg and that of the variety Zhongyou Za-1hao was 576.7 μg/pot at soil Cd concentration of 84.0 mg/kg, suggesting that shoot Cd uptake ability of the two Cd accumulator oilseed rapes was significantly higher than that of the Indian mustard. Xikou Huazi had higher phytoremediation potential for Cd contaminated soil. Shoot Cd accumulation ability of the two Cd accumulator oilseed rapes was correspond and Cd was easier translocated to the shoot than hyperaccumulator Indian mustard as comparation plant. Shoot Cd distribution pattern showed consistent and significant reduction from older leaves to younger ones of two oilseed rapes and Indian mustard. Cd uptake by oilseed rapes in growth prophase was higher than that of growth anaphase.

Weld extraction from real-time radiograph based on bidirectional accumulator Hough Transform

An effective approach is presented to extract welds from real-time radiographs, Firstly an algorithm based on an adaptive bidirectional threshold was proposed to segment the gradient image into ternary image, and then the bidirectional accumulator Hough Transform was developed to extract weld edges from the ternary image. Different values of the coefficient proposed in the threshold algorithm were tested, and the proposed approach was applied to extract welds from real-time radiographic images of different types of welds with defects. Results show that the proposed method is adaptive and effective to extract welds from real-time radiographs of linear welds.

Development of hydraulic power unit and accumulator charging circuit for electricity generation,storage and distribution

It is the purpose of the present paper to convert hydraulic energy to electric energy and saves both the pressure and electrical energy for re - use during the next system upstroke using two secondary units coupled to induction motor to drive cylinder loads. During upstroke operation, the variable pump/motor （P/M） driven by both electric motor and the second （P/M） works as hydraulic pump and output flow to the cylinders which drive the load. During load deceleration, the cylinders work as pump while the operation of the two secondary units are reversed, the variable （P/M） works as a motor generating a torque with the electric motor to drive the other （P/M） which transforms mechanical energy to hydraulic energy that is saved in the accumulator. When the energy storage capacity of the accumulator is attained as the operation continues, energy storage to the accumulator is thermostatically stopped while the induction motor begins to work as a generator and generates electricity that is stored in the power distribution unit. Simulations were performed using a limited PT2 Block, i.e. 2nd-order transfer function with limitation of slope and signal output to determine suitable velocity of the cylinder which will match high performance and system stability. A mathematical model suited to the simulation of the hydraulic accumulator both in an open-or close-loop system is presented. The quest for improvement of lower energy capacity storage, saving and re-utilization of the conventional accumulator resulting in the short cycle time usage of hydraulic accumulators both in domestic and industrial purposes necessitates this research. The outcome of the research appears to be very efficient for generating fluctuation free electricity, power quality and reliability, energy saving/reutilization and system noise reduction.

Accumulator-Based Deep-Sea Microbe Gastight Sampling Technique

The accumulator is used as a pressure compensation device to realize deep-sea microbe gastight sampling. Four key states of the accumulator are proposed to describe the pressure compensation process and a corresponding mathematical model is established to investigate the relationship between the results of pressure compensation and the parameters of the accumulator. Simulation results show that during the falling process of the sampler, the accumulator＇ s real opening pressure is greater than its precharge pressure; when the sampling depth is 6000 m and the accumulator＇ s precharge pressure is less than 30 MPa, to increase the accumulator＇ s precharge pressure can improve pressure compensation results obviously. Laboratory experiments at 60 MPa show that the acctunulator is an effective and reliable pressure compensation device for deep-sea microbe samplers, The success in sea trial at a depth of 2000 m in the South China Sea shows that the mathematical model and laboratory experiment results are reliable.

ANALYSES OF ENERGY LOSSES AND ACCUMULATOR AND PARAMETERS DESIGN METHOD OF HYDRAULIC IMPACTOR MECHANISM

ＡＮＡＬＹＳＥＳＯＦＥＮＥＲＧＹＬＯＳＳＥＳＡＮＤＡＣＣＵＭＵＬＡＴＯＲＡＮＤＰＡＲＡＭＥＴＥＲＳＤＥＳＩＧＮＭＥＴＨＯＤＯＦＨＹＤＲＡＵＬＩＣＩＭＰＡＣＴＯＲＭＥＣＨＡＮＩＳＭ￥Ｈｅ，Ｑｉｎｇｈｕａ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎ...

Neutral and accumulator species in determining the spatial structure of tree species at different spatial scales

In 2014,a 40-ha undisturbed plot was established in the Beijing Songshan Nature Reserve.The spatial distribution and spatial associations of five dominant tree species of different height classes were examined using spatial point pattern analysis and the effects of these species on local community diversity assemblages were examined using the ISAR method.The dominant species were characterized by an aggregated distribution at spatial scales of 0–50 m.At smaller spatial scales,trees in larger height classes had significant positive and negative effects on the diversity of the lower height classes.However,at larger spatial scales this effect was diminished.At small scales(0–10 m),accumulator species had positive effects on species diversity,maintained an over-representative proportion of diversity in their proximity,and supported the ecological niche theory.At the larger scale(10–50 m),neutral species were dominant and had positive effects on species diversity,though repeller species,which had negative effects on species diversity,also contributed to diversity.Neutral and accumulator species together determined local species diversity,but the relative importance of the two was closely related to spatial scale.A combination of the ecological niche theory and neutral processes together determines species coexistence and biodiversity of an undisturbed pine forest.

Capability Analysis of Chaotic Mutation and Its Self-Adaption

Through studying several kinds of chaotic mappings' distributions of orbital points, we analyze the capabilityof the chaotic mutations based on these mappings. Nunerical experiments support our conclusions very well. Thecapability analysis also led to a self-adaptive mechanism of chaotic mutation. The introducing of the self-adaptivechaotic mutation can improve the performance of genetic algorithm very prominently.

Supply Chain Finance Credit Risk Evaluation Method Based on Self-Adaption Weight

Credit risk is the core issue of supply chain finance. In the supply chain, problems happened in different enterprises can influent the whole to different degrees through transferring, thus statuses of all enterprises and their different influences should be considered when evaluating the supply chain’s credit risk. We examine the characters of supply chain network and complex network, use the local growing complex network to simulate the real supply chain, use cluster analysis to classify the company into several levels;Introducing each level’s self-adaption weight formula according to the company’s quantity and degrees of this level and use the weight to improve the credit evaluation method. The research results indicate that complex network can be used to simulate the supply chain. The credit risk evaluation (CRE) of an enterprise level with bigger note degrees has a greater weight in the supply chain system’s CRE, thus has greater effect on the whole chain. Considering different influences of different enterprise levels can improve credit risk evaluation method’s sensitivity.

CONSTANT WORK-POINT CONTROL FOR PARALLEL HYBRID SYSTEM WITH CAPACITOR ACCUMULATOR IN HYDRAULIC EXCAVATOR

Limitations of various accumulators in hybrid hydraulic excavator are analyzed. A program using capacitor as the accumulator based on constant work-point control is put forward. A simulating experimental system of hybrid construction machinery is established, and experimental study on constant work-point control for parallel hybrid system with capacitor accumulator is carried out using the pressure and flow rate derived from boom cylinder of hydraulic excavator in actual work as the simulating loads. A program of double work-point control is proposed and proved by further experiments.

Use of the finite elements method for modelling the dynamic load impact on hydraulic leg equipped with gas accumulator

Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of the mechanical system was presented.By using the MSC.Software products the following exemplary computer simulations were made: dynamic load impact on the hydraulic leg as well as effectiveness of the hydraulic leg protection against overload with help of gas accumulator.

Dynamic characteristics of hydraulic power steering system with accumulator in load-haul-dump vehicle

Using hydraulic power steering system of model EIMCO 922 load-haul-dump vehicle as a simulation example, the dynamic characteristics of hydraulic power steering system in load-haul-dump vehicle were simulated and discussed with SIMULINK software and hydraulic control theory. The results show that the dynamic characteristics of hydraulic power steering system are improved obviously by using bladder accumulator, the hydraulic power steering system of model EIMCO 922 load-haul-dump vehicle generates vibration at the initial stage under the normal steering condition of pulse input, and its static response time is 0.25 s shorter than that without bladder accumulator. Under the normal steering working condition, the capacity of steering accumulator for absorbing pulse is directly proportional to the cross section area of connecting pipeline, and inversely proportional to the length of connecting pipeline. At the same time, the precharge pressure of nitrogen in steering accumulator should be 60%80% of the rated minimum working pressure of hydraulic power steering system. Under the abnormal steering working condition, the steering cylinder piston may obtain higher motion velocity, and the dynamic response velocity of hydraulic power steering system can be increased by reducing the pressure drop of hydraulic pipelines between the accumulator and steering cylinder and by increasing the rated pressure of hydraulic power steering system, but the dynamic characteristics of hydraulic power steering system in load-haul-dump vehicle have nothing to do with the precharge pressure of nitrogen in steering accumulator.

Reliability evaluation of bladder accumulator with no failure data

As a bladder accumulator is a high reliable and long life component in a hydraulic system,its cost is high and it takes a lot of time to test its reliability,therefore,a reliability test with small sample is performed,and no failure data is obtained using the method of fixed time truncation. In the case of Weibull distribution,a life reliability model of bladder energy storage is established by Bayesian method using the optimal confidence intervals method,a model of one-sided lower confidence intervals of the reliability and one-sided lower confidence intervals model of the reliability life are established. Results of experiments show that the evaluation method of no failure data under Weibull distribution is a good way to evaluate the reliability of the accumulator,which is convenient for engineering application,and the reliability of the accumulator has theoretical and practical significance.

Effects of Accumulator on Stabilization of Direct Acting Poppet Valve and Its System

The effect of vibration attenuation hy installing accumulator for water pressure system with the direct acting poppet valve is studied. The influencing factors of accumulator on the stabilization of direct acing poppet valve and the system are analyzed.

MOTION ANALYSIS AND DESIGN OF ACCUMULATOR FOR HYDRAULIC ROCK DRILL

ＭＯＴＩＯＮＡＮＡＬＹＳＩＳＡＮＤＤＥＳＩＧＮＯＦＡＣＣＵＭＵＬＡＴＯＲＦＯＲＨＹＤＲＡＵＬＩＣＲＯＣＫＤＲＩＬＬＬｉｕＳｈｉｘｕｎ（ＣｏｌｌｅｇｅｏｆＭｅｃｈａｎｉｃａｌａｎｄＥｌｅｃｔｒｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎ...

Optimal Control of a Thermoelectric Generator Attached with a Latent Heat Accumulator

Generally MPPT control (maximum power point tracking) is adopted to control of a thermoelectric generator. However, in the case of generation by use of a heat accumulator MPPT control cannot obtain maximum whole electrical output during the operation period. This is because the amount of heat stored in a heat accumulator is limited and easy to be exhausted rapidly by MPPT. Therefore MEPT (Maximum Efficiency Point Tracking) control should be developed to obtain maximum power from limited heat stored in the heat accumulator. When thermoelectric generator is used for waste heat recovery, conversion efficiency is quite difficult to be measured. This is due to time delay between the change of temperature profile in the thermoelectric generator and the change of heat medium temperature. Decrease of output current is desired to enlarge output because decrease of current decreases Peltier heat and improves efficiency of heat recovery. The experimental results indicate that current fluctuated by MPPT control causes loss of power output. We proposed the optimal control in which current is 10% smaller than one of MPPT control and evaluated it experimentally. We call this control scheme MEPT control. In this evaluation 500 W class thermoelectric generator, latent heat accumulator and the test facilities included 30 kW electric heater are utilized. Experimental result shows MEPT control exceeds MPPT in total electricity recovered from heat accumulator.

In-situ interfacial passivation and self-adaptability synergistically stabilizing all-solid-state lithium metal batteries

The function of solid electrolytes and the composition of solid electrolyte interphase(SEI)are highly significant for inhibiting the growth of Li dendrites.Herein,we report an in-situ interfacial passivation combined with self-adaptability strategy to reinforce Li_(0.33)La_(0.557)TiO_(3)(LLTO)-based solid-state batteries.Specifically,a functional SEI enriched with LiF/Li_(3)PO_(4) is formed by in-situ electrochemical conversion,which is greatly beneficial to improving interface compatibility and enhancing ion transport.While the polarized dielectric BaTiO_(3)-polyamic acid(BTO-PAA,BP)film greatly improves the Li-ion transport kinetics and homogenizes the Li deposition.As expected,the resulting electrolyte offers considerable ionic conductivity at room temperature(4.3 x 10~(-4)S cm^(-1))and appreciable electrochemical decomposition voltage(5.23 V)after electrochemical passivation.For Li-LiFePO_(4) batteries,it shows a high specific capacity of 153 mA h g^(-1)at 0.2C after 100 cycles and a long-term durability of 115 mA h g^(-1)at 1.0 C after 800 cycles.Additionally,a stable Li plating/stripping can be achieved for more than 900 h at 0.5 mA cm^(-2).The stabilization mechanisms are elucidated by ex-situ XRD,ex-situ XPS,and ex-situ FTIR techniques,and the corresponding results reveal that the interfacial passivation combined with polarization effect is an effective strategy for improving the electrochemical performance.The present study provides a deeper insight into the dynamic adjustment of electrode-electrolyte interfacial for solid-state lithium batteries.

Frequency detection of self-adaption control based on chaotic theory

Low-order Duffing and high-order Rossler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodic driving force is realized in this paper and the self-adaption is obtained. Thus, the detection precision and speed are promoted. The limitation that there are too many chaotic oscillators in Duffing system is broken. Meanwhile the disadvantage that the detection speed is lower in R ssler chaotic control is overcome. The self-adaption choice of frequency difference control is realized using the Duffing and Rssler different chaotic oscillators to obtain unknown signal frequency. The simulation results show that the presented method is feasible and effective.

Effects of Intercropping with CaryophyllaceaeAccumulator Plants on Cadmium Accumulation ofCyphomandra betacea Seedlings

The pot experiments were conducted to study the effects of intercropping with Pseudostellaria maximowicziana,Malachiumaquaticum and Stellaria media on Cd accumulation of Cyphomandra betacea seedlings.Compared with the monoculture,intercropping with Caryophyllaceae endarachneyllaceae accumulator plants decreased the biomass of C.betacea seedlings,and also reduced the photosynthetic pigment contents in C.betacea seedlings,which involve chlorophyll a,chlorophyll b,total chlorophyll and carotenoid.Intercropping with P.maximowicziana and M.aquaticum increased the Cd contents in shoots of C.betacea seedlings,which increased by 65.02%and 25.61%,respectively,compared with the monoculture.Intercropping with S.media reduced the Cd contents in shoots of C.betacea seedlings,which were reduced by 4.68%compared with the monoculture.When intercropping with C.betacea seedlings,the Cd accumulation amounts of 3 Caryophyllaceae accumulator plants were ranked as S.media>P.maximowicziana>M.aquaticum.Intercropping with S.media could effectively reduce Cd accumulation of C.betacea seedlings under Cd-contaminated soil condition.