Numerical study of the self-pulsing of DC discharge:from corona to parallel-plate configurations

We present here an investigation of the self-pulsing phenomenon of negative corona and parallel-plate discharge in argon within one frame of a one-dimensional fluid model in cylinder–cylinder electrode geometry.The transition from corona to parallel-plate discharge is obtained by changing the inner and outer radii of the electrodes.The model reproduces the self-pulsing waveform well and provides the spatiotemporal behaviors of the charged particles and electric field during the pulse.The self-pulsing shows a common feature that occurs in various configurations and that does not depend on a specific electrode structure.The self-pulsing is the transformation between a weak-current Townsend mode and a large-current normal glow mode.The behavior of the positive ions is the dominant factor in the formation of the pulse.

A Novel Three-Section Self-Pulsating DFB Laser with Hybrid Grating

A 1.55μm InGaAsP-InP three-section DFB laser with hybrid grating is fabricated and self-pulsations （SP） with frequencies around 20GHz are observed. The mechanism of SP generation in this device is researched. Furthermore,the important role of the phase tuning section on the SP is investigated.

Theoretical modelling of the effect of photon lifetime on the output dynamics of Er-doped distributed feedback fibre lasers

By employing a simple model of describing three-level lasers, we have theoretically investigated the effect of photon lifetime on the output dynamics of Er-doped distributed feedback fibre lasers. And based on the theoretical analysis we have proposed a promising method to suppress self-pulsing behaviour in the fibre lasers.

Experimental and theoretical study on the break phenomenon of self-pulsation for liquid-centered swirl coaxial injectors

Experimental observations together with theoretical analysis were conducted to investigate the break phenomenon and the corresponding mechanisms of self-pulsation for a liquid-centered swirl coaxial injector with recess number of RN=1.Instantaneous spray images were obtained based on background light imaging technology with a high-speed camera.By dynamic analysis of the flow process of the liquid sheet in the recess chamber,a 1D self-pulsation theoretical model was established,and the self-sustaining mechanisms of self-pulsation were analyzed in depth.The results show that the increase of the momentum flux ratio will lead to the occurrence of the break phenomenon of self-pulsation for the injector with a larger recess length,and the frequency and intensity of self-pulsation before and after the break phenomenon differ significantly.The flow dynamics in the recess chamber sequentially transform from a periodic expansion-dominated flow to a stable flow,and then develop to a periodic contraction-dominated flow during the break process of self-pulsation.With the occurrence of self-pulsation before the break phenomenon,the liquid sheet has little effect on the pressure disturbance in the recess chamber.In contrast,with the occurrence of self-pulsation after the break phenomenon,the pressure disturbance is obviously affected by the liquid sheet.Based on the theoretical analysis model of self-pulsation,the self-pulsation frequency can be predicted.Furthermore,the self-sustaining mechanism of self-pulsation before and after the break phenomenon is preliminarily confirmed.The energy transfer between the gas-and liquid-phase is an important factor for maintaining the self-pulsation process.

Frequency and wavelength tunable optical microwave source based on a distributed Bragg reflector self-pulsation laser

A frequency and wavelength tunable self-pulsation laser based on DBR laser devices is reported for the first time.This laser generates continuous tunable optical microwave in the range of 1.87-21.81 GHz with 3-dB linewidth about 10 MHz by tuning the injection currents on the front and back gain sections,and exhibits wavelength tuning range from 1536.28 to 1538.73 nm by tuning the injection currents on the grating section.