Magnetically controlled self-sealing pressure-preserved coring technology

Pressure-preserved coring is an effective means to develop deep resources. However, due to the complexity of existing pressure-preserved technology, the average success rate of pressure-preserved coring is low. In response, a novel in situ magnetically controlled self-sealing pressure-preserved coring technology for deep reserves has been proposed and validated. This innovative technology distinguishes itself from conventional methods by employing noncontact forces to replace traditional pretensioning mechanisms, thereby enhancing the mechanical design of pressure-preserved coring equipment and significantly boosting the fault tolerance of the technology. Here, we report on the design,theoretical calculations, experimental validation, and industrial testing of this technology. Through theoretical and simulation calculations, the self-sealing composite magnetic field of the pressure controller was optimized. The initial pre-tensioning force of the optimal magnetic field was 13.05 N. The reliability of the magnetically controlled self-sealing pressure-preserved coring technology was verified using a self-developed self-sealing pressure performance testing platform, confirming the accuracy of the composite magnetic field calculation theory. Subsequently, a magnetically controlled self-triggering pressure-preserved coring device was designed. Field pressure-preserved coring was then conducted,preliminarily verifying the technology's effective self-sealing performance in industrial applications.Furthermore, the technology was analyzed and verified to be adaptable to complex reservoir environments with pressures up to 30 MPa, temperatures up to 80℃, and p H values ranging from 1 to 14. These research results provide technical support for multidirectional pressure-preserved coring, thus paving a new technical route for deep energy exploration through coring.

The mechanism of unconventional hydrocarbon formation: Hydrocarbon self-sealing and intermolecular forces

The successful development of unconventional hydrocarbons has significantly increased global hydrocarbon resources, promoted the growth of global hydrocarbon production and made a great breakthrough in classical oil and gas geology. The core mechanism of conventional hydrocarbon accumulation is the preservation of hydrocarbons by trap enrichment and buoyancy, while unconventional hydrocarbons are characterized by continuous accumulation and non-buoyancy accumulation. It is revealed that the key of formation mechanism of the unconventional reservoirs is the self-sealing of hydrocarbons driven by intermolecular forces. Based on the behavior of intermolecular forces and the corresponding self-sealing, the formation mechanisms of unconventional oil and gas can be classified into three categories:(1) thick oil and bitumen, which are dominated by large molecular viscous force and condensation force;(2) tight oil and gas, shale oil and gas and coal-bed methane, which are dominated by capillary forces and molecular adsorption;and(3) gas hydrate, which is dominated by intermolecular clathration. This study discusses in detail the characteristics, boundary conditions and geological examples of self-sealing of the five types of unconventional resources, and the basic principles and mathematical characterization of intermolecular forces. This research will deepen the understanding of formation mechanisms of unconventional hydrocarbons, improve the ability to predict and evaluate unconventional oil and gas resources, and promote the development and production techniques and potential production capacity of unconventional oil and gas.

Investigation of a novel self-sealing pore micro-arc oxidation film on AM60 magnesium alloy

Micro-arc oxidation(MAO)is one of the promising methods to improve the corrosion resistance of magnesium alloys.However,there are plenty of micro-pores in the traditional MAO films,deteriorating their protection property.A novel self-sealing pore MAO film was developed in this paper.The morphologies and chemical composition of the film were detected by scanning electron microscopy(SEM)and energy dispersive X-ray spectroscopy(EDX).The corrosion behavior was investigated by electrochemical and salt spray tests.The possible film formation and corrosion mechanisms were proposed.The self-sealing pore film presents a blue appearance.Most of the micro-pores in the surface of the film are sealed during the film formation process.The chemical composition of the film mainly contains Mg,O,Ti,F and P.The self-sealing pore film exhibits better corrosion resistance compared with the traditional silicate film.Especially,the self-sealing pore film keeps intact after salt spray test for 2000 h,which can be attributed to its high compactness.

Self-sealing of fractures in indurated claystones measured by water and gas flow

Self-sealing of fractures in the indurated Callovo-Oxfordian(COX)and Opalinus(OPA)claystones,which are considered as host rocks for disposal of radioactive waste,was investigated on artificially fractured samples.The samples were extracted from four lithological facies relatively rich in clay mineral,carbonate and quartz,respectively.The self-sealing of fractures was measured by fracture closure,water permeability variation,gas penetration,and recovery of gas-induced pathways.Most of the fractured samples exhibited a dramatic reduction inwater permeability to low levels that is close to that of intact rock,depending on their mineralogical composition,fracture intensity,confining stress,and load duration.The self-sealing capacity of the clay-rich samples is higher than that of the carbonate-rich and sandy ones.Significant effects of sample size and fracture intensity were identified.The sealed fractures become gas-tight for certain in-jection pressures.However,the measured gas breakthrough pressures are still lower than the confining stresses.The gas-induced pathways can recover when contacting water.These important findings imply that fractures in such indurated claystones can effectively recover to hinder water transport but allow gas release under relatively low pressures without compromising the rock integrity.

Degradation and biological properties of Ca-P contained micro-arc oxidation self-sealing coating on pure magnesium for bone fixation

Poor corrosion resistance is one of the main disadvantages for biodegradable magnesium-based metals,especially applied for bone fixation,where there is a high demand of bio-mechanical strength and stability.Surface coating has been proved as an effective method to control the in vivo degradation.In this study a Ca-P self-sealing micro-arc oxidation(MAO)coating was studied to verify its efficacy and biological properties by in vitro and in vivo tests.It was found that the MAO coating could effectively retard the degradation according to immersion and electrochemical tests as well as 3D reconstruction by X-ray tomography after implantation.The MAO coating exhibited no toxicity and could stimulate the new bone formation.Therefore,the Ca-P self-sealing MAO coating could be a potential candidate for application of biodegradable Mg-based implant in bone fixations.

Swelling behaviors of heterogeneous red-bed mudstone subjected to different vertical stresses

In this study,the axial swelling strain of red-bed mudstone under different vertical stresses are measured by swell-under-load method,and the microstructure of mudstone after hygroscopic swelling is studied by mercury intrusion porosimetry(MIP).The weakening coefficient and Weibull distribution function are introduced into the coupling model of mudstone moisture diffusion-swelling deformation-fracture based on finite-discrete element method(FDEM).The weakening effect of moisture on mudstone's mechanical parameters,as well as the heterogeneity of swelling deformation and stress distribution,is considered.The microcrack behavior and energy evolution of mudstone during hygroscopic swelling deformation under different vertical stresses are studied.The results show that the axial swelling strain of mudstone decreases with increase of the vertical stress.At low vertical stresses,moisture absorption in mudstone leads to formation of cracks caused by hydration-induced expansion.Under high vertical stresses,a muddy sealing zone forms on the mudstone surface,preventing further water infiltration.The simulation results of mudstone swelling deformation also demonstrate that it involves both swelling of the mudstone matrix and swelling caused by crack expansion.Notably,crack expansion plays a dominant role in mudstone swelling.With increasing vertical stress,the cracks in mudstone change from tensile cracks to shear cracks,resulting in a significant reduction in the total number of cracks.While the evolution of mudstone kinetic energy shows similarities under different vertical stresses,the evolution of strain energy varies significantly due to the presence of different types of cracks in the mudstone.The findings provide a theoretical basis for understanding the hygroscopic swelling deformation mechanism of red-bed mudstone at various depths.

Thermo-hydro-mechanical behavior of clay rock for deep geological disposal of high-level radioactive waste

In the context of deep geological disposal of radioactive waste in clay formations, the thermo-hydro- mechanical （THM） behavior of the indurated Callovo-Oxfordian and Opalinus clay rocks has been extensively investigated in our laboratory under repository relevant conditions： （1） rock stress covering the range from the lithostatic state to redistributed levels after excavation; （2） variation of the humidity in the openings due to ventilation as well as hydraulic drained and undrained boundary conditions; （3） gas generation from corrosion of metallic components within repositories; and （4） thermal loading from high-level radioactive waste up to the designed maximum temperature of 90 ~C and even beyond to 150 ~C, Various important aspects concerning the long-term barrier functions of the clay host rocks have been studied： （1） fundamental concept for effective stress in the porous clay-water system; （2） stress- driven deformation and damage as well as resulting permeability changes; （3） moisture influences on mechanical properties; （4） self-sealing of fractures under mechanical load and swelling]slaking of clay minerals upon water uptake; （5） gas migration in fractured and resealed claystones; and （6） thermal impact on the hydro-mechanical behavior and properties, Major findings from the investigations are summarized in this paper,

A Novel Method for Studying the Re-Swelling Capacity of Superabsorbent Polymers in An Artificial Crack

Re-swelling capacity is a key factor influencing the self-sealing efficiency of superabsorbent polymers (SAPs) in concrete.In this paper,a new parameter (re-swelling ratio,η),the volume ratio of the crack which was filled with the expansive SAPs and the dry SAPs,was given to quantify the re-swelling capacity of a single SAPs particle.An innovative immersion test was used to study the η value of SAPs in the hardened cement paste with an artificial crack.Moreover,the influence of the crack width and particle size on the sealing efficiency of SAPs in the cracked paste was investigated by a water permeability test.The results showed that the mass ratios of the expansive SAPs in an artificial crack were less than those in a free state.The η value of SAPs in the hardened paste with an artificial crack increased with the increase of the crack width due to the restricting effects of the crack.The expansive SAPs in the cracked paste could totally seal or partly seal the crack within the original void.Moreover,the sealing efficiency of SAPs slightly increased with the rise of the crack width (0.25 to 0.5 mm) and the reduction of the particle size.This research demonstrates that the crack width in concrete and the particle size of SAPs are the key factors influencing the re-swelling behavior of SAPs which should be taken into consideration when designing the self-sealing concrete containing SAPs.