Numerical Investigation on the Harbour Resonance Inside A Harbour with Lateral Cavities

Wave-induced harbour resonance is numerically investigated inside a harbour with lateral cavities.The theoretical solutions for the amplification parameter are compared with the simulated results under varying dimensionless wave numbers in order to verify the simulation model in a rectangular harbour at a constant depth.The results indicate that the numerical model can correctly calculate the natural frequency and the natural wave height.A range of calculations are performed for harbour resonance with one pair of lateral cavities,two pairs of lateral cavities and three pairs of lateral cavities,respectively.The simulated results indicate that the amplitude of the amplification parameter decreases both at the primary natural oscillation and the secondary natural oscillation,as the number of lateral cavities increases.The dimensionless wave number reduces as the number of lateral cavities increases both at the primary natural oscillation and the secondary natural oscillation as well.

Non-volatile dynamically switchable color display via chalcogenide stepwise cavity resonators

High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.

Asymmetrical Fabry-Perot cavity slot micro-ring resonator and its sensing characteristics

To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.

Resonance suppression and electromagnetic shielding effectiveness improvement of an apertured rectangular cavity by using wall losses

The cavity-mode resonance effect could result in significant degradation of the shielding effectiveness （SE） of a shielding enclosure around its resonance frequencies. In this paper, the influence of coated wall loss on the suppression of the resonance effect is investigated. For this purpose, an equivalent circuit model is employed to analyze the SE of an apertured rectangular cavity coated with an inside layer of resistive material. The model is developed by extending Robinson＇s equivalent circuit model through incorporating the effect of the wall loss into both the propagation constant and the characteristic impedance of the waveguide. Calculation results show that the wall loss could lead to great improvement on the SE for frequencies near the resonance but almost no effect on the SE for frequencies far away from the resonance.

Design and high-power testing of offline conditioning cavity for CiADS RFQ high-power coupler

To validate the design rationality of the power coupler for the RFQ cavity and minimize cavity contamination,we designed a low-loss offline conditioning cavity and conducted high-power testing.This offline cavity features two coupling ports and two tuners,operating at a frequency of 162.5 MHz with a tuning range of 3.2 MHz.Adjusting the installation angle of the coupling ring and the insertion depth of the tuner helps minimize cavity losses.We performed electromagnetic structural and multiphysics simulations,revealing a minimal theoretical power loss of 4.3%.However,when the cavity frequency varied by110 kHz,theoretical power losses increased to10%,necessitating constant tuner adjustments during conditioning.Multiphysics simulations indicated that increased cavity temperature did not affect frequency variation.Upon completion of the offline high-power conditioning platform,we measured the transmission performance,revealing a power loss of 6.3%,exceeding the theoretical calculation.Conditioning utilized efficient automatic range scanning and standing wave resonant methods.To fully condition the power coupler,a 15°phase difference between two standing wave points in the condition-ing system was necessary.Notably,the maximum continuous wave power surpassed 20 kW,exceeding the expected target.

Effective transmittance of Fabry–Perot cavity under non-parallel beam incidence

The Fabry–Perot(FP) resonant cavity is widely used in laser and spectroscopic measurements due to its unique interference transfer function(ITF). In the ideal case of parallel incident light, the ITF of the FP resonant cavity can be expressed by the Airy function. However, in reality, it is difficult to achieve perfect parallelism with collimated beams. In this article, a theoretical model is established for non-parallel light incidence, which assumes that the non-parallel incident light is a cone-shaped beam, and the cone angle is used to quantify the non-parallelism of the beam. The transmittance function of the FP resonant cavity under non-parallel light incidence is derived. The accuracy of the model is experimentally verified. Based on this model, the effects of divergence angle, tilt angle and FP cavity parameters(reflectivity, cavity length)on the ITF are studied. The reasons for the decrease in peak value, broadening and asymmetry of the interference peak under non-parallel light incidence are explained. It is suggested that a fine balance between the interference peak and the collimation effect of the incident light should be considered in the design and application of FP resonant cavities, especially for tilted applications such as angle-scanned spectroscopy. The research results of this article have certain significance for the design and application of FP resonant cavities.

Enhanced surface plasmon interference lithography from cavity resonance in the grating slits

Surface plasmon interference lithography based on grating diffraction has been studied both theoretically and ex- perimentally in recent years. In this paper, we demonstrate that the cavity resonance in the grating slits can improve the subwavelength interference, not only the intensity but also the uniformity of the pattern. Both the typical lithography structure which merely consists of periodic metallic gratings and the modified structure equipped with a reflection layer are studied. The finite element method has been performed to study the interference pattern. Numerical simulations show that the property of the interference pattern is the optimum when cavity resonance happens. This enhancement can be applied to all the lithography structures which are based on the grating diffraction.

Analysis of iris-loaded resonance cavity in miniaturized maser

The size reduction of atomic clocks is a long-standing research issue.Many atomic clocks such as passive hydrogen masers(PHMs)and compact rubidium masers(CRMs)use iris-loaded resonance cavities(IRCs)as their microwave cavities because they can dramatically reduce the radical sizes of the atomic clocks.In this paper,the electromagnetic characteristic of the IRC is investigated by a theoretical model based on electromagnetic field theory.The formulas to calculate the resonance frequency,quality factor,and magnetic energy filling factor are presented.The relationship between the IRC structure and its electromagnetic characteristic is clarified.The theoretical calculation results accord well with the electromagnetic software simulations and experimental results.The results in this paper should be helpful in understanding the physical mechanism of the IRC and designing the atomic clocks.

Effect of Cavity Dimensions on TE_01δMode Resonance in Split-Post Dielectric Resonator Techniques

The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of simulations provide guidance for adjusting the dimensional parameters of the set-up to ensure that a strong TE01δ resonance mode is excited. The scaled designs of SPDR fixtures for operation at frequencies that are most important for applications are presented. These designs employ two sets of dielectric resonators (DRs) that can be fabricated from the standard ceramic materials. In addition, it is demonstrated that the resonance frequency of the TE01δ mode in the fixture can be tuned by adjusting the gap of the split DR.

Stochastic resonance of spinor condensates in optical cavity

Stochastic resonance is a phenomenon in which adding random noise to a system enhances the detection or transmission of a weak signal. It occurs when the noise interacts with the system's nonlinearity, thus improving signal-to-noise ratio and increasing sensitivity. Although parametric resonances in an atomic spinor Bose-Einstein condensate have been investigated, the question of whether one can observe stochastic resonance in such a system persists. In this study we propose a scheme for generating stochastic resonance in a cavity-spinor Bose-Einstein condensate coupling system. We demonstrate stochastic resonance through numerical calculations using the mean-field theory and truncated Wigner approximation methods. Furthermore, the characteristics of the system's response to noise and periodic signals are studied in detail. This study unravels a new scheme for observing stochastic resonance via linking atomic many-body physics with cavity quantum electrodynamics.

Facile fabrication of large-area hierarchical plasmonic cavities with broadband plasmon resonance for enhanced photocatalytic hydrogen evolution

Integrating hierarchical plasmonic cavities into photocatalysis offers a promising avenue for expanding the light utilization range to cover the entire solar spectrum. However, fabricating these nanostructures with seamless size transitions for a wide plasmon resonant range remains technically challenging, requiring precise nanofabrication control and often relying on expensive and laborious techniques like e-beam lithography and reactive ion etching. Herein, a one-step forming strategy was explored to fabricate simple yet hierarchical plasmonic cavities featuring the surface nanodome array-integrated plasmonic Fabry–Pérot cavity through a facile large-area nanoimprinting method. This design leverages a uniform feature size and periodic arrangement to broaden the light utilization range of TiO_(2) across the entire solar spectrum (200–2500 nm). It consists of an upper nanodome array cavity with vertically continuous graded sizes for broadband absorption (200–1500 nm), coupled with a bottom plate cavity that enlarges the overall cavity size to extend the range to 2500 nm. Remarkably, simply adjusting the thickness of the plate cavity can tune the resonant position, eliminating the need for expensive mold modifications. When combined with TiO_(2), this hierarchical plasmonic cavity significantly enhances the photocatalytic hydrogen evolution rate to 36.3 µmol/h, achieving a remarkable 9.8-fold increase compared to pure TiO_(2) under full-spectrum illumination. This approach offers a convenient and inexpensive alternative to sophisticated nanofabrication techniques for large-area hierarchical plasmonic cavities with broadband plasmon resonance to enhance the photocatalytic hydrogen evolution.

Teleportation of two-atom entangled state in resonant cavity quantum electrodynamics

An alternative scheme is presented for teleportation of a two-atom entangled state in cavity quantum electrodynamics （QED）. It is based on the resonant atom-cavity field interaction. In the scheme, only one cavity is involved, and the number of the atoms needed to be detected is decreased compared with the previous scheme. Since the resonant atom-cavity field interaction greatly reduces the interaction time, the decoherence effect can be effectively suppressed during the teleportation process. The experimental feasibility of the scheme is discussed. The scheme can easily be generalized to the teleportation of N-atom Greeninger-Horne-Zeilinger （GHZ） entangled states. The number of atoms needed to be detected does not increase as the number of the atoms in the GHZ state increases.

Anti-plane (SH) waves diffraction by an underground semi-circular cavity:analytical solution

Diffraction of a two-dimensional （2D） semi-circular cavity in a half-space under incident SH-waves is studied using the classic wave function expansion method with a new de-coupling technique. This so-called ＂improved cosine half- range expansion＂ algorithm exhibits an excellent performance in reducing displacement residual errors at two rim points of concern. The governing equations are developed in a manner that minimizes the residues of the boundary conditions. Detailed derivation and analysis procedures as well as truncation of infinite linear governing equations are presented. The semi-circular cavity model presented in this paper, due to its simple profile, is expected to be used in seismic wave propagation studies as a benchmark for examining the accuracies of various analytical or numerical methods for mixed-boundary wave propagation problems.

Diffraction of plane SH waves by a semi-circular cavity in half-space

This paper presents a closed-form solution for diffraction of plane SH waves by a semi-circular cavity in half-space by using wave function expansion method. Accuracy of the solution is checked by the displacement residual and stress residual along the boundaries. Numerical results show that there are notable differences for response amplitudes between a semi-circular cavity and a whole-circular cavity in a half-space.

Novel method to measure unloaded quality factor of resonant cavities at room temperature

We demonstrated a novel method to measure the unloaded quality factor(Q factor) of high-Q resonant cavities. This method was used to obtain data with low errors and calculate the unloaded Q factor. This procedure was more reliable than traditional methods. The data required for the method were near the resonant frequency,not at the half-power points of the reflection coefficient curve or Smith chart. We applied the new method to measure a resonant cavity with an unloaded Q factor of^100,000, obtaining good agreement between the measured and theoretical results.

Nonperturbative solutions to cylindrical resonant cavities with dissipative medium and imperfectly conducting walls

Cylindrical waveguides without end surfaces can serve as two-dimensional resonant cavities. In such cavities the electromagnetic oscillations corresponding to an eigenfrequency can always be taken as TM or TE modes even when the walls have a finite conductivity and the medium is absorptive. This paper obtains analytic solutions to the field equations when the cylinder has a circular cross section. Some nonperturbative conclusions are drawn from the eigenvalue equation. Approximate analytic results for the resonant frequencies are obtained when the absorption of the medium is small and the walls are good conductors. Stability of the eigen modes is discussed. Similar results for the coaxial line are presented.

Optimization of Sound Absorption and Insulation Performances of a Dual-Cavity Resonant Micro-Perforated Plate

This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.

A research on high-temperature permittivity and loss tangent of low-loss dielectric by resonant-cavity technique

Resonant-cavity technique was introduced to measure the permittivity and loss tangent of low-loss dielectrics. The dielectric properties at 9-10 GHz are measured accurately at the temperature up to 800 ℃ by the resonant cavity technique. The only electrical parameters that need to be measured are quality factors （Q） and resonant length （L） of resonant cavity loaded and unloaded with dielectric sample. Moreover, the error caused by thermal expansion effect was resolved by error analysis and experimental calibration.

High-performance Refractive Index Sensor Based on Photonic Crystal Single Mode Resonant Micro-cavity

An effective refractive index sensor built with square lattice photonic crystal is proposed,which can be applicable to photonic integrated circuits.Two photonic crystal waveguides rather than conventional ridge waveguides are used as entrance/exit waveguides to the micro-cavity.Three layers of photonic lattice are set between the photonic crystal waveguides and the micro-cavity to achieve both a high transmission and a high sensitivity.The plane wave method is utilized to calculate the disperse curves and the finite difference time domain scheme is employed to simulate the light propagation.At the resonant wavelength of about 1500 nm,the resonant wavelength shifts up by 0.7 nm for each increment of Δn=0.001.A transmission of more than 0.75 is observed.Although the position disorder of the photonic crystal doesn't affect the sensitivity of the sensor, the transmission reduces rapidly as the disorder increases.

Preparation of W state in resonant bimodal cavity quantum electrodynamics

A scheme is proposed for generating entangled W states with four cavity modes. In this scheme, we send a V-type three-level atom through two identical two-mode cavities in succession. After the atom exits from the second cavity, the four cavity modes are prepared in the W state. On the other hand we can obtain three-atom W states by sending three V-type three-level atoms through a two-mode cavity in turn. The present scheme does not require conditional measurement, and it is easily generalized to preparing 2n-mode W states and n-atom W states.