Sensitivity of Pion versus Parton-Jet Nuclear Modification Factors to the Path-Length Dependence of Jet-Energy Loss at RHIC and LHC

We compare the jet-path length and beam-energy dependence of the pion nuclear modification factor and a patton-jet nuclear modification factor at RHIC and LHC, and contrast the predictions based on a linear pQCD and a highly non-linear hybrid AdS holographic model of jet-energy loss. It is found that both models require a reduction of the jet-medium coupling from RHIC to LHC to account for the measured pion nuclear modification factor. In the case of the parton-jet nuclear modification factor, however, which serves as a lower bound for the LO jet nuclear modification factor of reconstructed jets, the extracted data can be characterized without a reduced jet-medium coupling at LHC energies. It is concluded that when the reconstructed jets are sensitive to both quarks and gluons and thus provide more information than the pion nuclear modification factor, their information regarding the jet-medium coupling is limited due to the superposition with NLO and medium effects. Hence, a detailed description of the underlying physics requires both the leading hadron and the reconstructed jet nuclear modification factor. Unfortunately, the results for both the pion and the parton-jet nuclear modification factor are insensitive to the jet-path dependence of the models considered.

Sensitivity analysis on parameter changes in underground mine ventilation systems

A more efficient mine ventilation system, the ventilation-on-demand （VOD） system, has been proposed and tested in Canadian mines recently. In order to supply the required air volumes to the production areas of a mine, operators need to know the cause and effect of any changes requested from the VOD system. The sensitivity analysis is developed through generating a cause and effect matrix of sensitivity factors on given parameter changes in a ventilation system. This new utility, which was incorporated in the 3D-CANVENT mine ventilation simulator, is able to predict the airflow distributions in a ventilation network when underground conditions and ventilation controls are changed. For a primary ventilation system, the software can determine the optimal operating speed of the main fans to satisfy the airflow requirements in underground workings without necessarily using booster fans and regulators locally. An optimized fan operating speed time-table would assure variable demand-based fresh air delivery to the production areas effectively, while generating significant savings in energy consumption and operating cost.

Application of the Third Theory of Quantification in Screening Sensitive Geological Factors Influencing Coal and Gas Outburst

The principles of the third theory of quantification were discussed. The concept and calculation method of reaction degree were put forward, which have extended the applying range and scientificalness of the primary reaction. Taking the Zhongmacun mine as an example, the geological factors affecting coal and gas outburst were researched. Eight sensitive factors for the outburst of coal and gas were screened out from 11 geological factors using the method of unit classification and the third theory of quantification. On the basis of this, the Zhongmacun coal mine was classified into several divisions. The practice shows that it is feasible to apply the third theory of quantification to gas geology, which offers a new thought to screen the sensitive geological factors of gas outburst forecast.

Improvements on High Current Performance of Static Induction Transistor

Methods for improving the high current performance of static induction transistor （SIT） are presented.Many important factors,such as ＂trans-conductance per unit channel width＂ θ, ＂gate efficiency＂ η, ＂sensitivity factor＂ D,and ＂intrinsic static gain＂ μ0,that may be used to describe different aspects of the electrical performance of an SIT are first defined.The dependences of electrical parameters on the structure and technological process of an SIT are revealed for the first time.The packaging technologies are so important for the improvement of high power performance of SITs that they must be paid attention.Testing techniques and circuits for measuring frequency and power parameters of SITs are designed and constructed.The influence of packaging processes in technological practice on the electrical performance of SITs is also discussed in depth.

Photoreduction of CO_(2) in the presence of CH_(4) over g-C_(3)N_(4) modified with TiO_(2) nanoparticles at room temperature

CO_(2)reduction under simulated sunlight over photocatalysts has become an attractive researcher area recently.In this work,carbon nitride compounds modified by TiO_(2)nanoparticles(TNPs)have been used for the photoreduction of CO_(2)in the presence of CH_(4)at room temperature.Briefly,a series of noble-metal-free TNP-graphitic-carbon nitride(g-C_(3)N_(4),also abbreviated CN)photocatalysts with different TNPs loadings and calcination temperatures have been synthesized by a wet-chemical method.The characterization results of XRD,FTIR,SEM,TEM,BET,XPS,CO_(2)Adsorption,UV-vis,and PL demonstrate that the BET surface area and CO_(2)adsorption capacity have been improved after the calcination.Besides,the g-C_(3)N_(4)has been successfully coupled with the TNPs and a heterojunction has formed at their interface.These characters contribute to increase the photocatalytic activity of TNPs-CN toward reducing CO_(2)in the presence of CH_(4),and its'performance is better than bare g-C_(3)N_(4),Titania(P_(25))-CN,MgO-CN,or Cu_(2)O-CN.Orthogonal experiments are then carried out to investigate the sensitivity factors and optimum conditions.The sensitivity results show that the reaction pressure makes little difference on the photocatalysis results,which verifies the photoinduced CO_(2)-CH_(4)reaction has a tiny change in gas volume.In addition,under the optimum conditions,the turnover frequency(TOF)of CO after 4 h reaction can reach 9.98μmol g-cat.^(-1)h^(-1),and traces of ethane and ethylene have been detected during the reactions.In addition,surface acetate and carbonaceous deposit are found on the(20)TNPs-CN/450 surface after continuous 24 h irradiation under the optimum conditions,which resulting in the inactivation of the catalyst.Finally,possible reaction mechanisms have been proposed based on the results.

The Phenomenal Alleviation of Transmission Congestion by Optimally Placed Multiple Distributed Generators Using PSO

In the current electricity paradigm, the rapid elevation of demands in industrial sector and the process of restructuring are the main causes for the overuse of transmission systems. Hence, the evolution of novel technology is the ultimate need to avoid the damages in the available transmission systems. An appreciable volume of renewable energy sources is used to produce electric power, after the implementation of deregulation in power system. Even though, they are intended to improve the reliability of power system, the unpredictable outages of generators or transmission lines, an impulsive increase in demand and the sudden failures of vital equipment cause transmission congestion in one or some transmission lines. Generation rescheduling and load shedding can be used to alleviate congestion, but some cases require quite few improved methods. With the extensive application of Distributed Generation (DG), congestion management is also performed by the optimal placement of DGs. Therefore, this research employs a Line Flow Sensitivity Factor (LFSF) and Particle Swarm Optimization (PSO) for the determination of optimal location and size of multiple DG units, respectively. This proposed problem is formulated to minimize the total system losses and real power flow performance index. This approach is experimented in modified IEEE-30 bus test system. The results of N-1 contingency analysis with DG units prove the competence of this proposed approach, since the total numbers of congested lines get reduced from 15 to 2. Hence, the results show that the proposed approach is robust and simple in alleviating transmission congestion by the optimal placement and sizing of multiple DG units.

Modeling N_2O Emissions from Agricultural Fields in Southeast China

DNDC, a rainfall-driven and process-oriented model of soil carbon and nitrogenbiogeochemistry, is applied t0 simulate the nitrous oxide emissions from agricultural ecosystem inSoutheast China. We simulated the soil N2O emission during a whole rice-wheat rotation cycle(from Nov. 1, 1996 to Oct. 31, 1997) under three different conditions, which are A) no fertilizer, B)both chemical fertilizer and manure and, C) chemical fertiliser only. The processes ofN2O emission were discussed in detail by comparing the model outputs with the results from fieldmeasurement. The comparison shows that the model is good at simulating most of theNzO emission pulses and trends. Although the simulated N2O emission fluxes are generally lessthan the measured ones, the model outputs during the dryland period, especially during the wheatreviving and maturing stages in spring, are much better than those during the paddy field period.Some sensitive experiments were made by simulating the N2O emissions in spring, when there is asmallest gap between the simulated fluxes and the measured ones. Meanwhile, the effects of someimportant regulating factors, such as the rainfall N deposition by rainfall, temperature, tillage, nitrogen fertilizer and manure application on N2O emission during this period were analyzed. Fromthe analysis, we draw a conclusion that soil moisture and fertilization are the most important regulating factors while the N2O emission is sensitive to some other factors, such as temperature, manure, tillage and the wet deposition of atmospheric nitrate.

Multi-objective optimal configuration of current limiting strategies

With the level of short-circuit current of power systems growing increasingly higher,optimal allocation of current limiters has received considerable attention in recent years,especially in China.This paper analyzes two kinds of common used current limiters based on the increment of bus impedance matrix and proposes a multi-objective current limiters configuration model considering the investment of limiters,the level of short-circuit current,as well as the transient stability of power system.An innovative search space reduction technique based on sensitivity factor is introduced to choose better candidate locations for current limiters so as to avoid the curse of dimensionality.The elitist non-dominated sorting genetic algorithm II is used to search the Pareto-optimal solutions of the proposed model.In order to further improve optimization efficiency,master-slave parallel modification of NSGA-II program structure is implemented.The satisfactory case study results demonstrate the feasibility of the proposed multi-objective method in power system current limiters allocation associated with cost,security and stability.

Reliable buffered clock tree routing algorithm with process variation tolerance

When IC technology is scaled into the very deep sub-micron regime, the optical proximity effects （OPE） turn into noticeable in optical lithography. Consequently, clock skew becomes more and more susceptible to process variations, such as OPE. In this paper, we propose a new buffered clock tree routing algorithm to prevent the influence of OPE and process variations to clock skew. Based on the concept of BSF （branch sensitivity factor）, our algorithm manages to reduce the skew sensitivity of the clock tree in the topology generation. The worst case skew due to the wire width change has been estimated, and proper buffers are inserted to avoid large capacitance load. Experimental results show that our algorithm can produce a more reliable, processinsensitive clock tree, and control clock skews in their permissible range evidently.