Actuator and sensor fault isolation in a class of nonlinear dynamical systems

Fault isolation in dynamical systems is a challenging task due to modeling uncertainty and measurement noise,interactive effects of multiple faults and fault propagation.This paper proposes a unified approach for isolation of multiple actuator or sensor faults in a class of nonlinear uncertain dynamical systems.Actuator and sensor fault isolation are accomplished in two independent modules,that monitor the system and are able to isolate the potential faulty actuator(s)or sensor(s).For the sensor fault isolation(SFI)case,a module is designed which monitors the system and utilizes an adaptive isolation threshold on the output residuals computed via a nonlinear estimation scheme that allows the isolation of single/multiple faulty sensor(s).For the actuator fault isolation(AFI)case,a second module is designed,which utilizes a learning-based scheme for adaptive approximation of faulty actuator(s)and,based on a reasoning decision logic and suitably designed AFI thresholds,the faulty actuator(s)set can be determined.The effectiveness of the proposed fault isolation approach developed in this paper is demonstrated through a simulation example.

Distributed fault diagnosis observer for multi-agent system against actuator and sensor faults

Component failures can cause multi-agent system(MAS)performance degradation and even disasters,which provokes the demand of the fault diagnosis method.A distributed sliding mode observer-based fault diagnosis method for MAS is developed in presence of actuator and sensor faults.Firstly,the actuator and sensor faults are extended to the system state,and the system is transformed into a descriptor system form.Then,a sliding mode-based distributed unknown input observer is proposed to estimate the extended state.Furthermore,adaptive laws are introduced to adjust the observer parameters.Finally,the effectiveness of the proposed method is demonstrated with numerical simulations.

Sensor fault diagnosis of nonlinear processes based on structured kernel principal component analysis

A new sensor fault diagnosis method based on structured kernel principal component analysis （KPCA） is proposed for nonlinear processes. By performing KPCA on subsets of variables, a set of structured residuals, i.e., scaled powers of KPCA, can be obtained in the same way as partial PCA. The structured residuals are utilized in composing an isolation scheme for sensor fault diagnosis, according to a properly designed incidence matrix. Sensor fault sensitivity and critical sensitivity are defined, based on which an incidence matrix optimization algorithm is proposed to improve the performance of the structured KPCA. The effectiveness of the proposed method is demonstrated on the simulated continuous stirred tank reactor （CSTR） process.

Early Sensor Fault Detection Based on PCA and Clustering Analysis

This paper proposes a novel scoring index for the early sensor fault detection in order to make full use of massive archived spacecraft telemetry data.The early detection of sensor faults is made by using the index constructed by the K-means algorithm and PCA model.The sensor fault detection includes the learning phase and monitoring phase.The amplitude of sensor fault has been always increasing when the performance of sensors deteriorates during a period.The proposed index can detect the smaller sensor faults than the squared prediction error( SPE) index which means it can discover the sensor faults earlier than the later.The simulation results demonstrate the effectiveness and feasibility of the proposed index which can decrease the check-limit as much as 40% than SPE in the same magnitude of bias sensor fault.

Sensor Fault Diagnosis Observer Design for Linear Sampled-Data Descriptor System with Time-Vary Delay

In this paper, a robust sensor fault diagnosis observer with non-singular structure is proposed for a class of linear sampled-data descriptor system with state time-vary delay. Firstly, a sampled-data descriptor model with time-vary delay is proposed and transformed into a discrete-time non-singular one. Then, a robust sensor fault diagnosis observer is proposed based on the state estimation error and the measurement residual, this observer can guarantee the robustness of the residual against the augmented disturbance and the sensor fault, which means the H∞ performance index is satisfied. As the confining matrix of the designed observer parameters does not meet the Linear Matrix Inequality (LMI), a cone complementary linearization (CCL) algorithm is proposed to solve this problem. The decision logic of the residual is obtained by the residual evaluation function. Simulation results show the effectiveness of the method.

Sensor Fault Diagnosis and Reconstruction of Engine Control System Based on Autoassociative Neural Network

The topology and property of Autoassociative Neural Networks(AANN) and theAANN's application to sensor fault diagnosis and reconstruction of engine control system arestudied. The key feature of AANN is feature extract and noise filtering. Sensor fault detection isaccomplished by integrating the optimal estimation and fault detection logic. Digital simulationshows that the scheme can detect hard and soft failures of sensors at the absence of models forengines which have performance deteriorate in the service life, and can provide good analyticalredundancy.

Attitude sensor fault diagnosis based on Kalman filter of discrete-time descriptor system

To diagnose the fault of attitude sensors in satellites, this paper proposes a novel approach based on the Kalman filter of the discrete-time descriptor system. By regarding the sensor fault term as the auxiliary state vector, the attitude measurement system subjected to the attitude sensor fault is modeled by the discrete-time descriptor system. The condition of estimability of such systems is given. And then a Kalman filter of the discrete-time descriptor system is established based on the methodology of the maximum likelihood estimation. With the descriptor Kalman filter, the state vector of the original system and sensor fault can be estimated simultaneously. The proposed method is able to esti-mate an abrupt sensor fault as well as the incipient one. Moreover, it is also effective in the multiple faults scenario. Simulations are conducted to confirm the effectiveness of the proposed method.

Diagnosis of process faults and sensor faults in a class of nonlinear uncertain systems

This paper presents a fault diagnosis method for process faults and sensor faults in a class of nonlinear uncertain systems.The fault detection and isolation architecture consists of a fault detection estimator and a bank of adaptive isolation estimators,each corresponding to a particular fault type.Adaptive thresholds for fault detection and isolation are presented.Fault detectability conditions characterizing the class of process faults and sensor faults that are detectable by the presented method are derived.A simulation example of robotic arm is used to illustrate the effectiveness of the fault diagnosis method.

ENGINE SENSOR FAULT DIAGNOSIS USING MAIN AND DECENTRALIZED NEURAL NETWORKS

This Paper presents a methodology for solving the sensor failure detection, isolation and accommodation of aeroengine control systems using on line learning neural networks(NN), which has one main NN and a set of decentralized NNs. Changes in the system dynamics are monitored by the on line learning NN. When a failure occurs in some sensor, the sensor failure detection can be accomplished with high precision, and the sensor failure accommodation can be achieved by replacing the value from the failed sensor with its estimate from the decentralized NN. By integrating the optimal estimation and failure logic, this method can detect soft failures. Simulation of one kind of turboshaft engine control system with this multiple neural network architecture shows that the ANN developed can detect and isolate hard and soft sensor failures timely and provide accurate accommodation.

An Insight Survey on Sensor Errors and Fault Detection Techniques in Smart Spaces

The widespread adoption of the Internet of Things (IoT) has transformed various sectors globally, making themmore intelligent and connected. However, this advancement comes with challenges related to the effectiveness ofIoT devices. These devices, present in offices, homes, industries, and more, need constant monitoring to ensuretheir proper functionality. The success of smart systems relies on their seamless operation and ability to handlefaults. Sensors, crucial components of these systems, gather data and contribute to their functionality. Therefore,sensor faults can compromise the system’s reliability and undermine the trustworthiness of smart environments.To address these concerns, various techniques and algorithms can be employed to enhance the performance ofIoT devices through effective fault detection. This paper conducted a thorough review of the existing literature andconducted a detailed analysis.This analysis effectively links sensor errors with a prominent fault detection techniquecapable of addressing them. This study is innovative because it paves theway for future researchers to explore errorsthat have not yet been tackled by existing fault detection methods. Significant, the paper, also highlights essentialfactors for selecting and adopting fault detection techniques, as well as the characteristics of datasets and theircorresponding recommended techniques. Additionally, the paper presents amethodical overview of fault detectiontechniques employed in smart devices, including themetrics used for evaluation. Furthermore, the paper examinesthe body of academic work related to sensor faults and fault detection techniques within the domain. This reflectsthe growing inclination and scholarly attention of researchers and academicians toward strategies for fault detectionwithin the realm of the Internet of Things.

Aircraft Engine Sensor Fault Diagnostics Based on Estimation of Engine's Health Degradation

A duty in development of an on-line fault detection algorithm is to make it associate with estimation of engine s health degradation. For this purpose,an on-line diagnostic algorithm is put forward. Using a tracking filter to estimate the engine s health condition over its lifetime,can be reconstructed an onboard model,which is then made to match a real aircraft gas turbine engine. Finally,a bank of Kalman filters is applied in fault detection and isola-tion (FDI) of sensors for the engine. Through the bank...

Sensor Faults Observer Design with H_∞ Performance for Non-linear T-S systems

This paper deals with the problem of the state estimation and the sensor faults detection for nonlinear perturbed systems described by Takagi-Sugeno （T-S） fuzzy models with unmeasurable premise variables. Indeed, a T-S observer is synthesized, in descriptor form, to estimate both the system states and the sensor faults simultaneously. The idea of the proposed approach is to introduce the sensor fault as an auxiliary variable in the state vector. Besides, the T-S model with unmeasurable premise variables is reduced to a perturbed model with measurable variables. Convergence conditions are established with Lyapunov theory and the H∞ performance in order to guarantee the best robustness to disturbances. These conditions are expressed in terms of linear matrix inequalities （LMIs）. The parameters of the observer are computed using the solution of the LMI conditions. Finally, a numerical example is given to illustrate the design procedures. Simulation results show the satisfactory performances.

Fuzzy Filter Design for Affine Systems with Sensor Faults:A Dynamic Event-Triggered Approach

This study addresses the issue of dynamic event-triggered-based filtering for fuzzy affine systems.To alleviate the utilization of constraint bandwidth resources and improve the efficiency of the signals exchange,a dynamic event-triggered protocol is forwarded to regulate the trigger instants with objective system states.Meanwhile,the nonhomogeneous Markov process is proposed to characterize the dynamic behaviors of sensor faults,where the time-varying transition probabilities belong to a convex polytope set.Finally,the validity and applicability of devised filter design methodology for fuzzy affine systems are displayed via two practical models.

Hybrid Fault Diagnosis and Isolation for Component and Sensor of APU in a Distributed Control System

This paper addresses the gas path component and sensor fault diagnosis and isolation(FDI) for the auxiliary power unit(APU). A nonlinear dynamic model and a distributed state estimator are combined for the distributed control system. The distributed extended Kalman filter(DEKF)is served as a state estimator,which is utilized to estimate the gas path components’ flow capacity. The DEKF includes one main filter and five sub-filter groups related to five sensors of APU and each sub-filter yields local state flow capacity. The main filter collects and fuses the local state information,and then the state estimations are feedback to the sub-filters. The packet loss model is introduced in the DEKF algorithm in the APU distributed control architecture. FDI strategy with a performance index named weight sum of squared residuals(WSSR) is designed and used to identify the APU sensor fault by removing one sub-filter each time. The very sensor fault occurs as its performance index WSSR is different from the remaining sub-filter combinations. And the estimated value of the soft redundancy replaces the fault sensor measurement to isolate the fault measurement. It is worth noting that the proposed approach serves for not only the sensor failure but also the hybrid fault issue of APU gas path components and sensors. The simulation and comparison are systematically carried out by using the APU test data,and the superiority of the proposed methodology is verified.

Ship speed power performance under relative wind profiles in relation to sensor fault detection

Statistical data analysis and visualization approaches to identify ship speed power performance under relative wind(i.e.apparent wind)profiles are considered in this study.Ship performance and navigation data of a selected vessel are analyzed,where various data anomalies,i.e.sensor related erroneous data conditions,are identified.Those erroneous data conditions are investigated and several approaches to isolate such situations are also presented by considering appropriate data visualization methods.Then,the cleaned data are used to derive various relationships among ship performance and navigation parameters that have been visualized in this study,appropriately.The results show that the wind profiles along ship routes can be used to evaluate vessel performance and navigation conditions by assuming the respective sea states relate to their wind conditions.Hence,the results are useful to derive appropriate mathematical models that represent ship performance and navigation conditions.Such mathematical models can be used for weather routing type applications(i.e.voyage planning),where the respective weather forecast can be used to derive optimal ship routes to improve vessel performance and reduce fuel consumption.This study presents not only an overview of statistical data analysis of ship performance and navigation data but also the respective challenges in data anomalies(i.e.erroneous data intervals and sensor faults)due to onboard sensors and data handling systems.Furthermore,the respective solutions to such challenges in data quality have also been presented by considering data visualization approaches.

Robust sensor faults detection for induction motor using observer

Current sensor is one of the key elements in the control system of induction motor. Whether the accurate measurement of variables reflecting motor operation status can be made will directly affect the control effect on motor system and therefore the timely, accurate detection of sensor fault is necessary. This paper brings forward an observer- based method of residual generation and fault detection on the basis of the mathematical model of the induction motor. As whether or not the nonlinear part satisfies the Lipschitz conditions does not limit the observer design, the application of such an observer is expanded. Meanwhile, the contradiction between robust error and fault sensitivity is also settled. The correctness and effectiveness of such method are verified by experimental testing on the simulated fault which also casts light on engineering practice.

Sensor Fault Estimation and Fault-Tolerant Control for a Class of Takagi-Sugeno Markovian Jump Systems with Partially Unknown Transition Rates Based on the Reduced-Order Observer

This paper addresses the problem on sensor fault estimation and fault-tolerant control for a class of Takagi-Sugeno Markovian jump systems,which are subjected to sensor faults and partially unknown transition rates.First,the original plant is extended to a descriptor system,where the original states and the sensor faults are assembled into the new state vector.Then,a novel reduced- order observer is designed for the extended system to simultaneously estimate the immeasurable states and sensor faults.Second,by using the estimated states obtained from the designed observer,a state- feedback fault-tolerant control strategy is developed to make the resulting closed-loop control system stochastically stable.Based on linear matrix inequality technique,algorithms are presented to compute the observer gains and control gains.The effectiveness of the proposed observer and controller are validated by a numerical example and a compared study,respectively,and the simulation results reveal that the proposed method can successfully estimate the sensor faults and guarantee the stochastic stability of the resulting closed-loop system.

Application of Wavelets Transform to Fault Detection in Rotorcraft UAV Sensor Failure

This paper describes a novel wavelet-based approach to the detection of abrupt fault of Rotorcrafi Unmanned Aerial Vehicle （RUAV） sensor system. By use of wavelet transforms that accurately localize the characteristics of a signal both in the time and frequency domains, the occurring instants of abnormal status of a sensor in the output signal can be identified by the multi-scale representation of the signal. Once the instants are detected, the distribution differences of the signal energy on all decomposed wavelet scales of the signal before and after the instants are used to claim and classify the sensor faults.

Rule-based Fault Diagnosis of Hall Sensors and Fault-tolerant Control of PMSM

Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor faults occur. But there is scarcely any research focusing on fault diagnosis and fault-tolerant control of Hall sensor used in PMSM. From this standpoint, the Hall sensor faults which may occur during the PMSM operating are theoretically analyzed. According to the analysis results, the fault diagnosis algorithm of Hall sensor, which is based on three rules, is proposed to classify the fault phenomena accurately. The rotor phase estimation algorithms, based on one or two Hall sensor(s), are initialized to engender the fault-tolerant control algorithm. The fault diagnosis algorithm can detect 60 Hall fault phenomena in total as well as all detections can be fulfilled in 1/138 rotor rotation period. The fault-tolerant control algorithm can achieve a smooth torque production which means the same control effect as normal control mode (with three Hall sensors). Finally, the PMSM bench test verifies the accuracy and rapidity of fault diagnosis and fault-tolerant control strategies. The fault diagnosis algorithm can detect all Hall sensor faults promptly and fault-tolerant control algorithm allows the PMSM to face failure conditions of one or two Hall sensor(s). In addition, the transitions between health-control and fault-tolerant control conditions are smooth without any additional noise and harshness. Proposed algorithms can deal with the Hall sensor faults of PMSM in real applications, and can be provided to realize the fault diagnosis and fault-tolerant control of PMSM.

THE ROBUST OBSERVER FOR FAULTDETECTION OF THE SENSOR

ＴＨＥＲＯＢＵＳＴＯＢＳＥＲＶＥＲＦＯＲＦＡＵＬＴＤＥＴＥＣＴＩＯＮＯＦＴＨＥＳＥＮＳＯＲＷａｎｇＳｈｅｎｇｙｕａｎ（Ｆａｃｕｌｔｙ３０１，ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，Ｂｅｉｊｉｎｇ，Ｃ...