It is well known that -nitride semiconductors can generate the magnitude of MV/cm polarization electric field which is comparable with their ionization electric fields. To take full advantage of the polarization elect...It is well known that -nitride semiconductors can generate the magnitude of MV/cm polarization electric field which is comparable with their ionization electric fields. To take full advantage of the polarization electric field, we design an N-face AlGaN solar-blind avalanche photodiode (APD) with an Al<sub>0.45</sub>Ga<sub>0.55</sub>N/Al<sub>0.3</sub>Ga<sub>0.7</sub>N heterostructure as separate absorption and multiplication (SAM) regions. The simulation results show that the N-face APDs are more beneficial to improving the avalanche gain and reducing the avalanche breakdown voltage compared with the Ga-face APDs due to the effect of the polarization electric field. Furthermore, the Al<sub>0.45</sub>Ga<sub>0.55</sub>N/Al<sub>0.3</sub>Ga<sub>0.7</sub>N heterostructure SAM regions used in APDs instead of homogeneous Al<sub>0.45</sub>Ga<sub>0.55</sub>N SAM structure can increase significantly avalanche gain because of the increased hole ionization coefficient by using the relatively low Al-content AlGaN in the multiplication region. Meanwhile, a quarter-wave AlGaN/AlN distributed Bragg reflector structure at the bottom of the device is designed to remain a solar-blind characteristic of the heterostructure SAM-APDs.展开更多
Transient operations are commonly founded in fluid machineries such as the starting, stopping, and variations of rotor speeds, etc. Flow generated from a started fiat plate is of fundamental importance. Experiments ha...Transient operations are commonly founded in fluid machineries such as the starting, stopping, and variations of rotor speeds, etc. Flow generated from a started fiat plate is of fundamental importance. Experiments have been done to observe the flow evolution in current researches. And in order to explore the flow in more detailed scale, some vortex methods with high resolution and other numerical methods were developed to solve various related problems by some researchers. But the promotion of vortex method to engineering application is rare due to its complexity and difficulty in specifying the boundary conditions. In order to build up a method of numerical study for such problems, a simplified model is built up with a flat plate. The development of two-dimensional viscous incompressible flow generated from an impulsively started and uniformly accelerated infinitesimally thin flat plate is simulated numerically. A dynamic mesh（DM） method based on the spring analogue and local remeshing is applied to realize the mesh motion caused by the started plate. Researches show that the mesh quality will decline under large grid shear force during the updating process. To conquer this problem, a region near the plate is separated to guarantee the mesh quality at location of interest which is the innovation of the present paper. All computations at least cover a period during which the plate translates 6 times its length. The simulated instantaneous velocity profiles, flow structures and drag coefficients under several Reynolds numbers （20 ≤ Re ≤ 126） and accelerations （20 m/s2≤ a ≤ 152 m/s2） are presented and compared with existing results in literatures. Comparisons are found to be satisfactory, confirming the validity of the current proposed method（region separated DM）. The proposed DM method is firstly used to study the transient flow generated from a started flat plate and can be used in further study of transient characteristics during transient operations of turbo machineries.展开更多
基金Supported by the State Key Project of Research and Development Plan of China under Grant No 2016YFB0400903the National Natural Science Foundation of China under Grant Nos 61634002,61274075 and 61474060+2 种基金the Key Project of Jiangsu Province under Grant No BE2016174the Anhui University Natural Science Research Project under Grant No KJ2015A153the Open Fund of State KeyLab of Optical Technologies on Nano-fabrication and Micro-engineering
文摘It is well known that -nitride semiconductors can generate the magnitude of MV/cm polarization electric field which is comparable with their ionization electric fields. To take full advantage of the polarization electric field, we design an N-face AlGaN solar-blind avalanche photodiode (APD) with an Al<sub>0.45</sub>Ga<sub>0.55</sub>N/Al<sub>0.3</sub>Ga<sub>0.7</sub>N heterostructure as separate absorption and multiplication (SAM) regions. The simulation results show that the N-face APDs are more beneficial to improving the avalanche gain and reducing the avalanche breakdown voltage compared with the Ga-face APDs due to the effect of the polarization electric field. Furthermore, the Al<sub>0.45</sub>Ga<sub>0.55</sub>N/Al<sub>0.3</sub>Ga<sub>0.7</sub>N heterostructure SAM regions used in APDs instead of homogeneous Al<sub>0.45</sub>Ga<sub>0.55</sub>N SAM structure can increase significantly avalanche gain because of the increased hole ionization coefficient by using the relatively low Al-content AlGaN in the multiplication region. Meanwhile, a quarter-wave AlGaN/AlN distributed Bragg reflector structure at the bottom of the device is designed to remain a solar-blind characteristic of the heterostructure SAM-APDs.
基金supported by National Natural Science Foundation of China(Grant Nos. 50979095, 51176168, 50906074)China Postdoctoral Science Foundation(Grant Nos. 20100471697, 201104713)
文摘Transient operations are commonly founded in fluid machineries such as the starting, stopping, and variations of rotor speeds, etc. Flow generated from a started fiat plate is of fundamental importance. Experiments have been done to observe the flow evolution in current researches. And in order to explore the flow in more detailed scale, some vortex methods with high resolution and other numerical methods were developed to solve various related problems by some researchers. But the promotion of vortex method to engineering application is rare due to its complexity and difficulty in specifying the boundary conditions. In order to build up a method of numerical study for such problems, a simplified model is built up with a flat plate. The development of two-dimensional viscous incompressible flow generated from an impulsively started and uniformly accelerated infinitesimally thin flat plate is simulated numerically. A dynamic mesh（DM） method based on the spring analogue and local remeshing is applied to realize the mesh motion caused by the started plate. Researches show that the mesh quality will decline under large grid shear force during the updating process. To conquer this problem, a region near the plate is separated to guarantee the mesh quality at location of interest which is the innovation of the present paper. All computations at least cover a period during which the plate translates 6 times its length. The simulated instantaneous velocity profiles, flow structures and drag coefficients under several Reynolds numbers （20 ≤ Re ≤ 126） and accelerations （20 m/s2≤ a ≤ 152 m/s2） are presented and compared with existing results in literatures. Comparisons are found to be satisfactory, confirming the validity of the current proposed method（region separated DM）. The proposed DM method is firstly used to study the transient flow generated from a started flat plate and can be used in further study of transient characteristics during transient operations of turbo machineries.
