The facile method developed for preparing polyvinylidene fluoride plasma separation membrane via macromolecular interaction

The design of membrane pore is critical for membrane preparation. Polyvinylidene fluoride(PVDF) membrane exhibits outstanding properties in the water-treatment field. However, it is a huge challenge to prepare PVDF macro-pore plasma separation membrane by non-solvent induced phase separation(NIPS). Herein, a facile strategy is proposed to prepare PVDF macro-pore plasma separation membrane via macromolecular interaction. ATR-FTIR and ^(1)H NMR showed that the intermolecular interaction existed between polyethylene oxide(PEO) and polyvinylpyrrolidone(PVP). It could significantly affect the PVDF macro-pore membrane structure. The maximum pore of the PVDF membrane could be effectively adjusted from small-pore/medium-pore to macro-pore by changing the molecular weight of PEO. The PVDF macro-pore membrane was obtained successfully when PEO-200 k existed with PVP. It exhibited higher plasma separation properties than the currently used plasma separation membrane.Moreover, it had excellent hemocompatibility due to the similar plasma effect, hemolysis, prothrombin time, blood effect and complement C_(3a) effect with the current utilized plasma separation membrane,implying its great potential application. The proposed facile strategy in this work provides a new method to prepare PVDF macro-pore plasma separation membrane by NIPS.

Sprayed separation membranes: A systematic review and prospective opportunities

Membrane separation technology has been taken up for use in diverse applications such as water treatment,pharmaceutical,petroleum,and energy-related industries.Compared with the design of membrane materials,the innovation of membrane preparation technique is more urgent for the development of membrane separation technology,because it not only affects physicochemical properties and separation performance of the fabricated membranes,but also determines their potential in industrialized application.Among the various membrane preparation methods,spray technique has recently gained increasing attention because of its low cost,rapidity,scalability,minimum of environmental burden,and viability for nearly unlimited range of materials.In this Review article,we summarized and discussed the recent developments in separation membranes using the spray technique,including the fundamentals,important features and applications.The present challenges and future considerations have been touched to provide inspired insights for developing the sprayed separation membranes.

In-situ incorporation of halloysite nanotubes with 2D zeolitic imidazolate framework-L based membrane for dye/salt separation

Layered assembled membranes of 2D leaf-like zeolitic imidazolate frameworks(ZIF-L)nanosheets have received great attention in the field of water treatment due to the porous structure and excellent antibacterial ability,but the dense accumulation on the membrane surface and the low permeate flux greatly hinder their application.Herein,we synthesized m HNTs(modified halloysite nanotubes)/ZIF-L nanocomposites on modified m HNTs by in situ growth method.Interestingly,due to the different size of m HNTs and ZIF-L,m HNTs were packed in ZIF-L nanosheets.The hollow m HNTs provided additional transport channels for water molecules,and the accumulation of the ZIF-L nanosheets was decreased after assembling m HNTs/ZIF-L nanocomposites into membrane by filtration.The prepared m HNTs/ZIF-L membrane presented high permeate flux(59.6 L·m^(-2)·h^(-1)),which is 2-4 times of the ZIF-L membranes(14.8 L·m^(-2)·h^(-1)).Moreover,m HNTs/ZIF-L membranes are intrinsically antimicrobial,which exhibit extremely high bacterial resistance.We provide a controllable strategy to improve 2D ZIF-L assembles,and develops novel membranes using 2D package structure as building units.

Research progress and prospects on hydrogen separation membranes

Membrane separation technologies,with a broad application prospect in the field of hydrogen separation,are characterized by the simplicity of the devices,high energy efficiency and environmental friendliness.The performance of separation membranes is the primary factor that determines the efficiency of hydrogen separation.Therefore,the development of hydrogen separation membranes is always a research focus.This paper presents and reviews the research developments and features of organic membranes,inorganic membranes and hybrid matrix membranes for hydrogen separations.First,the characterization methods of key index parameters of membrane materials are presented.Second,the performance parameters of different types of membrane are compared.Finally,the trend of technological development of different types of membrane materials is forecast.

Hydrogen Permeation Characteristics of Pd-CuMembrane in Plasma Membrane Reactor

Hydrogen is an alternative energy source that has the potential to replace fossil fuels.One of the hydrogen applications is as a material for Polymer Electrolyte Membrane Fuel Cells(PEMFC)in fuel cell vehicles.High-purity hydrogen can be obtained using a hydrogen separation membrane to prevent unwanted contaminants from potentially harming the PEMFC components.In this study,we fabricated a plasma membrane reactor and investigated the permeation performance of a hydrogen separation membrane in a plasma membrane reactor utilizing atmospheric pressure plasma.The result showed the hydrogen permeation rate increasing with time as reactor temperature is increased through joule heating.By decreasing the gap length of the reactor from 2 to 1 mm,the hydrogen permeation rate increases by up to 40%.The hydrogen permeation rate increases by 30%when pressure is applied to the plasma membrane reactor by up to 100 kPa.

Research progress on the substrate for metal-organic framework(MOF) membrane growth for separation

During the last decade, metal-organic frameworks(MOFs) have been applied in various fields due to their unique chemical and functional advantages. One of the widespread research hotspots is MOF-based membranes for separations, specifically continuous defect-free MOF membranes, which are usually grown on porous substrates. The substrate not only serves as the MOF layer support but also has a great influence on the membrane fabrication process and the final separation performance of the resultant membrane. In this review, we mainly introduce the progress focused on the substrates for MOF membranes fabrication. The substrate modifications and seeding methods aimed at synthesizing highquality MOF membranes are also summarized systematically.

Unique Ligand Exchange Dynamics of Metal-Organic Polyhedra for Vitrimer-like Gas Separation Membranes

Metal-organic polyhedra(MOPs)possess a microporous framework and impose hierarchical constraints on their surface ligands,leading to the long-ignored,logarithmic ligand exchange dynamics.Herein,polymer networks with MOP as nanoscale cross-linkers(MOP-CNs)can integrate unique ligand exchange dynamics and microporosity,affording vitrimer-like gas separation membranes with promising mechanical performance and(re)processability.All the ligands on the MOP surfaces are confined and correlated via a 3D coordination framework and their neighboring spaces,giving rise to a high energy barrier for ligand exchange.Therefore,MOP-CNs demonstrate high mechanical strengths at room temperature due to their negligible ligand dynamics.The thermo-activated ligand exchange process with integrated network topology enables facile(re)processing and high solvo-resistance at high temperatures.This facilitates Arrhenius type temperature dependence of flowability and stress relaxation,giving rise to the simultaneous achievement of promising mechanical strengths and(re)processability.Finally,the cage topologies of MOPs endow the materials with a bonus microporous feature and spur their applications as gas separation membranes.

Novel materials for solid oxide fuel cells cathodes and oxygen separation membranes:Fundamentals of oxygen transport and performance

In the field of modern hydrogen energy,obtaining pure hydrogen and syngas and then being able to use them for green energy production are significant problems.Developing solid oxide fuel cells(SOFC)and catalytic membranes for oxygen separation as well as materials for these devices is one of the most likely ways to solve these problems.In this work,the authors’recent studies in this field are reviewed;the fundamentals of developing materials for SOFC cathodes and oxygen separation membranes’permselective layers based on research of their oxygen mobility and surface reactivity are presented.Ruddlesden-Popper phases Ln_(2-x)Ca_(x)NiO_(4+δ)(LnCNO)and perovskite-fluorite nanocomposites PrNi_(0.5)Co_(0.5)O_(3-δ)-Ce_(0.9)Y_(0.1)O_(2-δ)(PNC-YDC)were studied by isotope exchange of oxygen with C_(18)O_(2)and^(18)O_(2)in flow and closed reactors.For LnCNO a high oxygen mobility was shown(D*~10^(-7)cm^(2)/s at 700℃),being provided by the cooperative mechanism of oxygen migration involving both regular and highly-mobile interstitial oxygen.For PNC-YDC dominated a wide fast diffusion channel via fluorite phase and interphases due to features of the redistribution of cations resulting in superior oxygen mobility(D*~10^(-8)cm^(2)/s at 700℃).After optimization of composition and nanodomain structure of these materials,as cathodes of SOFC they provided a high power density,while for asymmetric supported oxygen separation membranes-a high oxygen permeability.

Growing Biomorphic Transition Metal Dichalcogenides and Their Alloys Toward High Permeable Membranes and Efficient Electrocatalysts Applications

3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,the direct growth of 3D transition metal dichalcogenides architectures with high crystal quality and well-controlled size/thickness remains a huge challenge.Herein,we report a facile,highly-repeatable,and versatile chemical vapor deposition strategy,for the mass production of high-quality 3D-architecratured transition metal dichalcogenides(e.g.,MoS_(2),WS_(2),and ReS_(2))and their alloys(e.g.,W_(x)Mo(1–x)S_(2)and Rex Mo_((1–x))S_(2))nanosheets on naturally abundant and low-cost diatomite templates.Particularly,the purified transition metal dichalcogenides products exhibit unique and designable 3D biomorphic hierarchical microstructures,controllable layer thicknesses,tailorable chemical compositions,and good crystallinities.The weak interlayer interactions endow them with good dispersity in solutions to form stable additive-free inks for solution-processing-based applications,for example,high-permeable and high-stable separation membranes for water purification,and efficient electrocatalysts for hydrogen evolution reactions.This work paves ways for the low-cost,mass production of versatile transition metal dichalcogenides powder-like materials with designable structures and properties,toward energy/environmental-related applications and beyond.

Radial Basis Function Neural Networks-Based Modeling of the Membrane Separation Process: Hydrogen Recovery from Refinery Gases

Membrane technology has found wide applications in the petrochemical industry, mainly in the purification and recovery of the hydrogen resources. Accurate prediction of the membrane separation performance plays an important role in carrying out advanced process control （APC）. For the first time, a soft-sensor model for the membrane separation process has been established based on the radial basis function （RBF） neural networks. The main performance parameters, i.e, permeate hydrogen concentration, permeate gas flux, and residue hydrogen concentration, are estimated quantitatively by measuring the operating temperature, feed-side pressure, permeate-side pressure, residue-side pressure, feed-gas flux, and feed-hydrogen concentration excluding flow structure, membrane parameters, and other compositions. The predicted results can gain the desired effects. The effectiveness of this novel approach lays a foundation for integrating control technology and optimizing the operation of the gas membrane separation process.

Remove volatile organic compounds(VOCs) with membrane separation techniques

Membrane separation, a new technology for removing VOCs including pervaporation, vapor permeation, membrane contactor, and membrane bioreactor was presented. Comparing with traditional techniques, these special techniques are an efficient and energy saving technology. Vapor permeation can be applied to recovery of organic solvents from exhaust streams. Membrane contactor could be used for removing or recovering VOCs from air or wastewater. Pervaporation and vapor permeation are viable methods for removing VOCs from wastewater to yield a VOC concentrate which could either be destroyed by conventional means, or be recycled for reuse.

Poly(amide-6-b-ethylene oxide)/[Bmim][Tf2N] blend membranes for carbon dioxide separation

Poly（amide-6-b-ethylene oxide）（Pebax1657）/1-butyl-3-methylimidazo-lium bis[trifluoromethyl）sulfonyl]-imide（[Bmim][Tf2N]） blend membranes with different [Bmim][Tf2N] contents were prepared via solution casting and solvent evaporation method. The permeation properties of the blend membranes for CO2, N2,CH4 and H2 were studied, and the physical properties were characterized by differential scanning calorimeter（DSC） and X-ray diffraction（XRD）. Results showed that [Bmim][Tf2N] was dispersed as amorphous phase in the blend membranes, which caused the decrease of Tg（PE） and crystallinity（PA）. With the addition of [Bmim][Tf2N], the CO2 permeability increased and reached up to approximately 286 Barrer at 40 wt%[Bmim][Tf2N], which was nearly double that of pristine Pebax1657 membrane. The increase of CO2 permeability may be attributed to high intrinsic permeability of [Bmim][Tf2N], the increase of fractional free of volume（FFV） and plasticization effect. However, the CO2 permeability reduced firstly when the [Bmim][Tf2N]content was below 10 wt%, which may be due to that the small ions of [Bmim][Tf2N] in the gap of polymer chain inhibited the flexibility of polymer chain; the interaction between Pebax1657 and [Bmim][Tf2N]decreased the content of EO units available for CO2 transport and led to a more compact structure. For Pebax1657/[Bmim][Tf2N] blend membranes, the permeabilities of N2, H2 and CH4decreased with the increase of feed pressure due to the hydrostatic pressure effect, while CO2 permeability increased with the increase of feed pressure for that the CO2-induced plasticization effect was stronger than hydrostatic pressure effect.

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.

Enhanced gas separation performance of mixed matrix hollow fiber membranes containing post-functionalized S-MIL-53

Mixed matrix hollow fiber membranes（MMHFMs）filled with metal-organic frameworks（MOFs）have great potential for energy-efficient gas separation processes,but the major hurdle is polymer/MOFs interfacial defects and membrane plasticization.Herein,lab-synthesized MIL-53 was post-functionalized by aminosilane grafting and subsequently incorporated into Ultem-1000 polymer matrix to fabricate high performance MMHFMs.SEM,DLS,XRD and TGA were performed to characterize silane-modified MIL-53（S-MIL-53）and prepared MMHFMs.Moreover,the effect of MOFs loading was systematically investigated first;then gas separation performance of MMHFMs for pure and mixed gas was evaluated under different pressures.MMHFMs containing post-functionalized S-MIL-53 achieved remarkable gas permeation properties which was better than model predictions.Compared to pure HFMs,CO2permeance of MMHFM loaded with 15%S-MIL-53 increased by 157%accompanying with 40%increase for CO2/N2selectivity,which outperformed the MMHFM filled with naked MIL-53.The pure and mixed gas permeation measurements with elevated feed pressure indicated that incorporation of S-MIL-53 also increased the resistance against CO2plasticization.This work reveals that post-modified MOFs embedded in MMHFMs facilitate the improvement of gas separation performance and suppression of membrane plasticization.

SEPARATION OF FORMIC ACID-WATER AZEOTROPIC MIXTURES BY MEMBRANE DISTILLATION

The azeotrope disappeared when the formic acid-water mixtures were treated by membrane distillation. Membrane distillation were used for separation of formic acid-water azeotropic mixtures for the first time.

Solvent-Less Vapor-Phase Fabrication of Membranes for Sustainable Separation Processes

Sustainable processes for purifying water,capturing carbon,producing biofuels,operating fuel cells,and performing energy-efficient industrial separations will require next-generation membranes.Solvent-less fabrication for membranes not only eliminates potential environmental issues with organic solvents,but also solves the swelling problems that occur with delicate polymer substrates.Furthermore,the activation procedures often required for synthesizing microporous materials such as metal–organic frameworks(MOFs)can be reduced when solvent-less vapor-phase approaches are employed.This perspective covers several vacuum deposition processes,including initiated chemical vapor deposition(iCVD),initiated plasma-enhanced chemical vapor deposition(iPECVD),solvent-less vapor deposition followed by in situ polymerization(SLIP),atomic layer deposition(ALD),and molecular layer deposition(MLD).These solvent-less vapor-phase methods are powerful in creating ultrathin selective layers for thin-film composite membranes and advantageous in conformally coating nanoscale pores for the precise modification of pore size and internal functionalities.The resulting membranes have shown promising performance for gas separation,nanofiltration,desalination,and water/oil separation.Further development of novel membrane materials and the scaling up of high-throughput reactors for solvent-less vapor-phase processes are necessary in order to make a real impact on the chemical industry in the future.

TEMPERATURE DEPENDENCE OF AIR SEPARATION OF LIQUID CRYSTALLINE TRIHEPTYL CELLULOSE/ETHYL CELLULOSE MEMBRANES

Triheptyl cellulose/ethyl cellulose(3/97)binary blend membranes were prepared from tetrahydrofuran,chloroform and dichloromethane solutions and their air separation capabit- ities were studied at different temperatures.With increasing temperature from 25 to 85℃,the flux QOEA of O_2-enriched air(OEA),O_2 permselectivity and the O_2 concentration Yo_2 in the OEA all increase.The membranes show a unique trend in their Yo_2～QOEA relationship,that is,the air separation capability increases simultaneously with the OEA permeation capability.The magnitudes of QOEA and Yo_2 for 17μm-thick membrane after the testg time of 36hours at 70℃ are 5×10^(-4)cm^3 (STP)/s·cm^2 and 37.6%,respectively.The air separation capability depends slightly on membrane forming solvents.

THE GAS TRANSPORT BEHAVIOR IN AROMATIC POLYESTER MEMBRANES

Six aromatic polyesters were prepared for gas separation membranes, and their permeation properties for hydrogen, oxygen, nitrogen, carbon dioxide, and methane were measured at 30 degrees C and 1 atmosphere by low pressure manometric method. The correlation between the gas transport behavior and molecular structure of aromatic polyester membrane is discussed. These data are interpreted qualitatively in terms of the calculated packing density, gas-polymer interaction, concentration of aryl bromine on backbone, and effect of silane group on main chain of polymer.

Hydrochloric acid recovery from rare earth chloride solutions by vacuum membrane distillation

The possibility of the recovery of hydrochloric acid from rare earth （RE） chloride solutions was first experimentally studied by batch vacuum membrane distillation （VMD）. The recovery by continuous VMD was also studied to devise methods that enabled the operation of VMD setup in a stable condition as well as to increase the membrane-operating life The results indicated that HCl separation with RE by VMD was possible, and the recovery ratio of 80% could be achieved by batch VMD. In continuous VMD, when the temperature of circular solutions, circular rate, and downstream pressure was 62-63℃, 5.4 cm/s, and 9.33 kPa, respectively, the HCl concentration in circular solutions and the processing capacity per membrane area were obtained. The mathematical results were in accordance with the experimental ones.

Design and synthesis of Al-MOF/PPSU mixed matrix membrane with pollution resistance

To enhance the performance of the polyphenylene sulfone(PPSU) membrane,a novel mixed matrix membrane with hydrophilicity and antifouling properties was prepared.Using PPSU as the ba sic membrane material,polyvinyl pyrrolidone(PVP) as the porogen,N-Methyl pyrrolidone(NMP) as the solvent,and MOF-CAU-1(Al_(4)(OH)_(2)(OCH_(3))_4(H_2 N-BDC)_(3)·xH_(2) O) as the filler,PPSU/CAU-1 mixed matrix membrane(MMM) was prepared by an immersion precipitation and phase transformation technique.By changing the amount of MOF-CAU-1,the properties and performance of the MMM membrane were investigated in terms of hydrophilicity,pore morphology,surface roughness,and dye removal.The results show that the highest pure water flux of the mixed reached 47.9 L·m^(-2)·h^(-1), when the CAU-1 addition amount was 1.0 wt%, which was 23% higher than that of the pure PPSU membrane.Both the rejection rate and the antifouling performance of the MMM membrane also noticeably improved.