On the analysis of the high-resolution sequence stratigraphy and coal accumulating law of jurassic in Ordos Basin

The strata of Jurassic was divided into three tectonic sequences and eight se- quences of third rank,according to the developing feature of the tectonic inconformity and the transforming feature of the depositional system tracts.Also the identification and the division of the base-level cycle of different period were carried through.Therefore three cycles of super period,eight cycles of long period,twenty-four cycles of middle period and some cycles of short period were identified.From the overall character of the coal-accu- mulation in the Mesozoic,we can see that the Yan'an formation is of the best nature of coal bearing.When the coal bearing systems of Jurassic were depositing,the Ordos area is the coal accumulating basin of terrene of large scale and located in the same tectonic unit.But the local structure of different part and the paleolandform are different in the basin which resulted in the difference of the depositional environment.So the layer number and the distribution of the thickness of the coal beds are different in the different part of the ba- sin.The coal-accumulating action migrated regularly along with the development,evolve- ment and migration of the depositional systems.The layer numbers of the coal beds, which can be mined,are more in the north and west fringe of the basin,whose distributing area is extensive,and they are more steady in the landscape orientation,also the total thickness is great.Therefore the nature of coal bearing and the coal-accumulating action of different part changed obviously in the space in Ordos area.

High-Resolution Sequence Stratigraphy of Shallow Lacustrine Delta Front: The Second Member of Sangonghe Formation, Central Junggar Basin

Shallow lacustrine delta front （SLDF） comprises mainly sheetlike subaqueous distributary channels （SDC） formed in shallow, gentle, and tectonically steady slope （Cai and Zhu, 2011）. SDC proves an important hydrocarbon reservoir type in the Daqing oilfield, Changqing oilfield, and the newly discovered Moxizhuang oilfield in Central Junggar Basin. However, SDC tends to prograde quickly and move laterally frequently,

HIGH-RESOLUTION SEQUENCE STRATIGRAPHIC ANALYSIS OF THE PERMIAN IN THE WESTERN SHANDONG AND HUAINAN-HUAIBEI COALFIELDS

The sedimentary characteristics and their combination succession of the Permian in the Shandong nd Huainan-Huaibei coalfields are analyzed. The mid-and short-term stratigraphic base-level cycles are identified. High-resolution sequences are divided based on the above results. The study shows that the stratigraphic base-level cyclic method is an efficient way in the determination of the high-resolution sequences, especially in the classification of tbe terrestrial and transitional depositional succession.

Logging Data High-Resolution Sequence Stratigraphy

The recognition and contrast of bed sets in parasequence is difficult in terrestrial basin high-resolution sequence stratigraphy. This study puts forward new methods for the boundary identification and contrast of bed sets on the basis of manifold logging data. The formation of calcareous interbeds, shale resistivity differences and the relation of reservoir resistivity to altitude are considered on the basis of log curve morphological characteristics, core observation, cast thin section, X-ray diffraction and scanning electron microscopy. The results show that the thickness of calcareous interbeds is between 0.5 m and 2 m, increasing on weathering crusts and faults. Calcareous interbeds occur at the bottom of a distributary channel and the top of a distributary mouth bar. Lower resistivity shale （4-5 Ω · m） and higher resistivity shale （〉 10Ω·m） reflect differences in sediment fountain or sediment microfacies. Reservoir resistivity increases with altitude. Calcareous interbeds may be a symbol of recognition for the boundary of bed sets and isochronous contrast bed sets, and shale resistivity differences may confirm the stack relation and connectivity of bed sets. Based on this, a high-resolution chronostratigraphic frame- work of Xi-1 segment in Shinan area, Junggar basin is presented, and the connectivity of bed sets and oil-water contact is confirmed. In this chronostratigraphic framework, the growth order, stack mode and space shape of bed sets are qualitatively and quantitatively described.

Division and Correlation of Lacustrine Gravity Flow Reservoirs Based on High-Resolution Sequence Stratigraphic Analysis—Taking Oil Formation I of Lower Es3 in Wuhaozhuang Oilfield as an Example

The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfield as an example, through the analysis of stratigraphic drilling and logging data in the study area, according to the genetic types of different levels of base level cycle interfaces and the characteristics of high-resolution sequence stratigraphy, this paper subdivides the lacustrine gravity flow oil layer of lower Es3 in Wuhaozhuang Oilfield, divides it into four short-term base level cycle sequences, and establishes the high-resolution isochronous stratigraphic framework of this interval. It is found that the mid-term, short-term and ultra short-term base level cycles correspond to the oil formation, sand layer group and single layer in the oil layer correlation unit of the oilfield respectively. Based on this, the oil layer correlation unit of the interval is divided, and the sublayer correlation model is established according to the identification characteristics of the short-term base level cycle.

Selection and application of wavelet transform in high-frequency sequence stratigraphy analysis of coarse-grained sediment in rift basin

Wavelet transformation is a widely used method in high-frequency sequence stratigraphic analysis.However, the application is problematic since different wavelets always return the same sequence analysis results. To address this issue, we applied five commonly used wavelets to theoretical sequence models to document some application criteria. Five gradual scale-change sequence models were simplified from the glutenite succession deposition by gravity flows to form the fining-upwards cycle sequences(FUCS) and coarsening-upwards cycle sequences(CUCS). After conducting theoretical sequence model tests, the optimal wavelet(sym4) was selected and successfully used with actual data to identify the sequence boundaries. We also proposed a new method to optimize the scale of continuous wavelet transformation(CWT) for sequence boundary determination. We found that the balloon-like marks in scalograms of db4, sym4, and coif4 wavelet determine, respectively, the fourth-order sequence boundary, the thick succession sequence boundaries in FUCS, and the thick succession sequence in FUCS and CUCS. Comparing the sequence identification results shows that the asymmetric wavelets had an advantage in high-frequency sequence boundary determination and sedimentary cycle discrimination through the amplitude trend of the coefficient, in which the sym4 wavelet is the most effective. In conclusion, the asymmetry of wavelets is the first selection principle, of which asymmetric wavelets are more sensitive to sediment deposition by flood flows. The match of the wavelet between the sequence is the second selection principle, in which the correlation of time-frequency impacts the accuracy of sequence surface localization. However, the waveform of the wavelet is a visual and abstract parameter for sequence boundary detection. The appropriate wavelet for lacustrine sequence analysis is the asymmetric wavelet with a weak number of side lobes. The depositional flows, depositional process,and autogenic are three sedimentary factors that influence the sequence analysis results.

The Upper Jurassic sediments,Marib-Shabwa Basin,Yemen:Lithofacies aspects and sequence stratigraphic analysis

The present study is devoted to understanding the evolution of the Upper Jurassic Sab'atayn Formation in the Marib-Shabwa Basin,Yemen,through a sequence stratigraphic analysis based on integrating datasets of sedimentology,seismic sections,and well logs.The Sab'atayn Formation(Tithonian age)is represented by a series of clastic and evaporites that were deposited under fluvio-deltaic to prodeltaic settings.It is divided into four members including Yah(at the base),upwards to Seen,Alif,and Safir at the top.Two third-order depositional sequences were determined for the Tithonian succession which were separated by three sequence boundaries.These sequences were classified into their systems tracts signifying several sedimentation patterns of progradational,aggradational,and retrogradational parasequence sets.The first depositional sequence corresponds to the early-middle Tithonian Yah and Seen units that can be classified into lowstand,transgressive,and highstand systems tracts.The second sequence comprises the late Tithonian Alif unit that can be subdivided into transgressive and highstand systems tracts.The sandy deposits of the Alif Member(highstand deposits)represent the most productive hydrocarbon reservoir in the basin.The Upper Jurassic sediments in the study area were resulted from a combination of eustatic and tectonic effects.

3D static modeling and sequence stratigraphy using well logs and seismic data:An example of Abu Roash G member in Bahga oilfield

This research uses both three-dimensional(3D)modeling and geologic well control to piece back together the architectural parts of the Late Cretaceous formations.The goal is to figure out the sizes,directions,locations,and controls of the layers of the fluvial sandstone reservoirs.Sequence stratigraphy is essential for 3D reservoir modeling and petroleum geology understanding in the Bahga oilfield.The purpose of this work is to create a static model that shows the layers and facies distribution in the reservoir interval.We will use data from nine well logs and 22 seismic lines calibrated by the Abu Roash G Member reservoir core intervals to accomplish this.The petrophysical study discovered three parts in the Abu Roash G Member reservoir rock:channel fill that is affected by tides,channel fill that is dominated by tides(intertidal sands),and channel top with lenticular bedded sandstone.The model's findings point to the existence of an NNW-oriented sand body,which could be a prime location to produce hydrocarbons.The original oil in place(OOIP)is about 3,438,279 Stock Tank Barrels(STB),and the oil reserve reaches up to 1,031,484(STB).Sequence stratigraphic analysis using seismic and well log information(SB)reveals that the Upper Cretaceous AR/G reservoir of the Bahga field is characterized by third-and fourth-order stratigraphic sequences,which are constrained by three Maximum Flooding Surfaces(MFS)and two Sequence Boundaries.The integration of the derived geological model and sequence stratigraphic results can lower future extraction risk by identifying the locations and trends of the geologic facies with the necessary petrophysical properties for the hydrocarbon accumulations.

Highlighting relationships between sand thicknesses,reservoir-seal pairs and paleobathymetry from a sequence stratigraphic perspective:An example from Tortonian Serravallian deposits,onshore Niger Delta Basin

The utilization of sequence stratigraphic concepts in identifying sands and their spatial continuity in distinct gross depositional settings is key,especially in frontier settings where data paucity is a common challenge.In the Baka field,onshore Niger Delta,detailed reservoir correlation guided by sequence stratigraphic framework analysis showed the distribution of sand and shale units constituting reservoirseal pairs(RSP)correlatable across the field.Within the 3rd-order packages,it is observed that the lowstand systems tract(LST)and highstand systems tract(HST)contain more RSPs and thicker 4th-and 5th-order sands than the transgressive systems tract(TST).In terms of bathymetry,it is noted that irrespective of systems tracts,the RSP Index(RI)decreases from the proximal shallow/inner shelf settings to the more distal outer shelf areas.Amongst all three systems tracts,intervals interpreted as lowstand prograding complexes contain the best developed sands and highest RSP.Sand development within the LSTs has been controlled by a pronounced growth fault regime accompanied by high subsidence and sedimentation rates.This is linked to the basinward migration of the sands during prolonged sea-level fall,creating significant accommodation space for sand deposition.On the other hand,the TSTs known to mark periods of progressive sea-level rise and landward migration of sandy facies,show thinner sands enclosed in much thicker,laterally extensive,and better-preserved deeper marine shales.Interpreted seismic sections indicate intense growth faulting and channelization that influenced the syn-and postdepositional development of the sand packages across the field.The initial timing of deformation of subregional faults in this area coincides with periods of abrupt falls in sea level.This approach could be useful for predicting sand-prone areas in frontier fields as well as possible reservoir-seal parameters required for some aspects of petroleum system analysis and quick-look volume estimation.

Method and Description of Sedimentary System Characterization Based on Sequence Stratigraphy

A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.

Sequence Stratigraphy of the Permian--Triassia Boundary Section of Changxing, Zhejiang, Southern China

Three third-order sequences and about one hundred high-frequency cycles or Milankovitchcycles within the Late Permian Changxingian to Early Triassic Griesbachian are identified in theMeishan Section of Changxing, Zhejiang Province, southern China, the candidate stratotype sec-tion of the global Permo-Triassic boundary, based on a detailed study of the biological,ecological and high-resolution allochthonous cyclic events, microfacies and depositional systems.Furthermore, the stacking pattern of the depositional systems across various Changxingian andGriesbachian sedimentary facies of the Lower Yangtze and the sequence stratigraphic frameworkare outlined with the Meishan section as the principal section. In this paper the habitat types offossil biota are applied to semiquantitative palaeobathymetry and the study of relative sea levelchanges.

Sequence Stratigraphy of the Desert System: A Case Study of the Lower Cretaceous in the Kuqa Basin in Xinjiang, Northwestern China

The Lower Cretaceous strata in the Kuqa Basin in Xinjiang are marked by a set of arid red beds. Several types of sedimentary fades can be identified in this set of arid red beds: mudstones of the plaza and intracontinental sebkha, aeolian sandstones, sandy conglomerates of the intermittent river, conglomerates of the pluvial fan, etc. These types of sedimentary facies constitute a typical desert system. Therefore, the Cretaceous strata in the Kuqa Basin provide a favorable condition for studies of sequence stratigraphic divisions of the desert system. With the rise and fall of the base level of the sedimentary basin, cyclicity is clearly revealed in stratigraphic records, which helps the identification of the third-order sequences. Based on the cyclicity in stratigraphic records, 5 third-order sequences can be found in the strata of the Early Cretaceous in the Kuqa Basin. These sequences comprise a second-order tectonic sequence. The primary feature of these third-order sequences is of an upward-fining sedimentary succession formed by a succession of 'coarse sediments of the alluvial system-fine sediments of the lake system'. The result of this study shows that aeolian sandstones are the best reservoirs of natural gas in the Cretaceous strata in the Kuqa Basin, and that the Kela-2 gas field is the first large gas field dominated by aeolian sandstone reservoirs in China.

Upper Devonian and Lower Carboniferous Sequence Stratigraphy of South China

In South China four depositional sequences are recognized in the upper part of Upper Devonian and Tournaisian. They are named SQ0 SQ1, SQ2 and SQ3 in ascending order. SQ0 is Strunian (uppermost Devonian), and the other three Tournaisian in age. These four depositional sequences appear to correlate fairly well with the four sequence recognized in Europe, North America and other areas. This may suggest that these sequences are synchronous depos- its resulted from the eustatic changes. The present study on sequence stratigraphy, biostratigraphy and event stratigraphy indicates that in neritic facies areas of South China, the Devonian-Carboniferous boundary, matching the boundary between Siphonodella praesulcata zone and S. sulcata zone in pelagic facies areas, is not only higher than the top of the Cystophrentis zone, but also higher than the top of the Devonian-Carboniferous boundary event bed. In neritic facies areas, the Devonian-Carbonifrerous boundary is marked by the most distinct transgressive surface within the Cystophrentiseudouralina interval zone, i. e. at the base of the TST of the SQ1. This boundary coincides with the top surface of the event bed resulted from the eustatic fall, and approximately corresponds to the basal part of Rseudouralina assemblage zone.

Late Carboniferous-Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin,North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous-Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.

Carbonate Sequence Stratigraphy of a Back-Arc Basin: A Case Study of the Qom Formation in the Kashan Area, Central Iran

The Qom Formation comprises Oligo-Miocene deposits from a marine succession distributed in the Central Basin of Iran. It is composed of five members designated as A-F. Little previous work exists on the sequence stratigraphy. Based on an integrated study of sequence stratigraphy with outcrop data, wells and regional seismic profiles, the Qom Formation is interpreted as a carbonate succession deposited in a mid.Tertiary back-arc basin. There are two second-order sequences （designated as SS1 and SS2） and five third-order sequences （designated as S1-S5）. Five distinct systems tracts including transgressive, highstand, forced regressive, slope margin and Iowstand have been recognized. The relationship between the sequences and lithologic sub-units has been collated and defined （S1 to S5 individually corresponding to A-C1, C2--C4, D-E, the lower and upper portions of F）; a relative sea level change curve and the sequence stratigraphic framework have been established and described in detail. The coincidence of relative sea level change between that of the determined back-arc basin and the world indicates that the sedimentary cycles of the Qom Formation are mainly controlled by eustatic cycles. The variable combination of the systems tracts and special tectonic-depositional setting causally underpin multiple sequence stratigraphic framework styles seen in the carbonates of the back-arc basin revealing： （1） a continental margin basin that developed some form of barrier, characterized by the development of multiple cycles of carbonate-evaporites; （2） a flat carbonate ramp, which occurred on the southern shelf formed by the lack of clastic supply from nearby magmatic islands plus mixed siliciclastics and carbonates that occurred on the northern shelf due to a sufficient clastics supply from the land; and （3） a forced regressive stratigraphic stacking pattern that occured on the southern shelf and in basin lows due to the uplifting of the southern shelf. Thick and widespread aggradational framework limestone usually occurs in the initial sequences （S1 and S3） of the supersequence, which led to preferential oil reservoir deposition but a lack of source and cap rocks, whereas the retrogradational and progradational framework limestone usually occurs in the later sequences （S2 and S4-S5） of the supersequence, which results in two perfect sets of source, reservoir and cap rock assemblies, so that the limestone in sub-member C2-C4 and the F-Member can be predicted as important objects for oil exploration.

A Scheme of the Hierarchy for Sequence Stratigraphy

Depositional sequences may be distinguished into six ranks of units as giga-, mega-, meso-, ortho-, sub- and micro-sequence, and are interpreted to be formed during the eustatic cycles with time-intervals of 500-6000 Ma, 60-120 Ma, 30-40 Ma, 2-5 Ma, 0.1-0.4 Ma and 0.02-0.04 Ma respectively. All of them are thought to be essentially related to cosmological cycles, except the megasequence which may be caused by the long-term geothermal cycles on cratons. We deem that the depositional sequences, though often influenced variably by local tectonics and other factors, are primarily global and periodic in nature. We also hold that as one of the planets within the Galaxy, the earth must have been affected in various ways by other asteroids, and that the depositional sequences are merely the responses of the hydrosphere to the cosmological cycles in sedimentation.

Origin of Molar-Tooth Structure Based on Sequence-Stratigraphic Position and Macroscopic Features: Example from Mesoproterozoic Gaoyuzhuang Formation at Jixian Section, Tianjin, North China

Both the macroscopic feature and the sequence-stratigraphic position of the molar-tooth structure developed in the third member of the Gaoyuzhuang （高于庄） Formation at the Jixian （蓟县） Section in Tianjin （天津） can provide some useful information about its origin and can reveal some problems to be further researched in the future. The Mesoproterozoic Gaoyuzhuang Formation is a set of 1 600 m thick carbonate strata. This formation can be divided into four members. The first member is mainly made up of stromatolitic dolomites; the second is marked by a set of manganese dolomites; the third is mainly composed of lamina limestones with the development of molar-tooth strcutures; the fourth is a set of stromatolitic-lithoherm dolomites. According to lithofacies and its succession, several types of meter-scale cycles can be discerned in the Gaoyuzhuang Formation： the L-M type, the subtidal type and the peritidal type. There is a regularly vertical stacking pattern for meter-scale cycles in the third-order sequence. Therefore, the Mesoproterozoic Gaoyuzhuang Formation can be divided into 13 third-order sequences （SQ1 to SQ13 ） and can further be grouped into 4 second-order sequences. The third member is marked by lamina limestones and can be grouped into three third-order sequences （SQ9 to SQ11 ）. The molar-tooth structure is developed in the middle part of the third sequence, i.e. SQH , in the third member. Several features of this kind of molar-tooth structure reflect some features of carbonate sedimentation in the Precambrian, such as the particular configuration, abundant organic matter, and easy silication. Stromatolites are chiefly formed in a shallow tidal-flat environment; lamina are mainly formed in the shallow ramp and molar-tooth structures are mainly generated in a relatively more deep-water environment from the middle to the deep ramp. Therefore, similar to stromatolite and lamina, the molartooth structure might also be a kind of bio-sedimentation structure. This suggestion is based on macroscopic observation and the sedimentary-facies analysis of the molar-tooth structures from the sequencestratigraphic position. These features of Precambrian sedimentation also reveal the problem of Precambrian carbonate sedimentation. With more detailed study, a more practical solution for these problems may be obtained in the future.

Sequence Stratigraphy of Upper Proterozoic Glacigenous Rocks in Southeastern Margin of Yangtze Platform

The Upper Proterozoic glacigenous rocks in the southeastern margin of the Yangtze platform were accumulated in a glacially influenced marine environment with extension set- ting. Two type I depositional sequences have been identified in the glacioclastic sediments the their boundaries enhanced by both tectonism and the incision of glaciation. The lower sequence (SQ1), comprising Changan and Fulu formations (Guangxi Province), Jiangkou and Xiangmen formations(Hunan Province) and their equivalents, is bounded by erosional unconformities both at the base and on the top. The upper sequence (SQ2), composed mainly of Nantuo Formation and its equivalents, is confined by an erosional unconformity at the base and covered by an exposure surface of karstification on the top. The depositional systems tracts are difficult to be distinguished directly and mainly characterized by the variation in glacioclastic supplies. Two types of episodic parasequeuces can be identified in the glacigenous rocks and are related to the evolution of depositional systems tracts. Both the sequences and parasequences are caused by autocyclic mechanism. The present research shows that the Upper Proterozoic glacigenous deposits are of significance for the analysis of the tectonic evolution of the Late Precambrian basin in South China.

Sequence stratigraphy, paleogeography, and coal accumulation regularity of major coal-accumulating periods in China

There are 9 major coal-accumulating periods during geological history in China,including the Early Carboniferous,Late Carboniferous-Early Permian,Middle Permian,Late Permian,Late Triassic,Early-Middle Jurassic,Early Cretaceous,Paleogene and Neogene.The coal formed in these periods were developed in different coal-accumulating areas(CAA)including the North China,South China,Northwest China,Northeast China,the Qinghai–Tibet area,and China offshore area.In this paper,we investigated depositional environments,sequence stratigraphy,lithofacies paleogeography and coal accumulation pattern of five major coal-accumulating periods including the Late Carboniferous to Middle Permian of the North China CAA,the Late Permian of the South China CAA,the Late Triassic of the South China CAA,the Early-Middle Jurassic of the North and Northwest China CAA,and the Early Cretaceous in the Northeast China CAA.According to distribution of the coal-bearing strata and the regional tectonic outlines,we have identified distribution range of the coal-forming basins,sedimentary facies types and coal-accumulating models.The sequence stratigraphic frameworks of the major coal-accumulating periods were established based on recognition of a variety of sequence boundaries.The distribution of thick coals and migration patterns of the coal-accumulating centers in the sequence stratigraphic framework were analyzed.The lithofacies paleogeography maps based on third-order sequences were reconstructed and the distribution of coal accumulation centers and coal-rich belts were predicted.

Sedimentology and Sequence Stratigraphy of Marine to Lacustrine Deltaic Deposits in a Craton Basin and Their Controlling Factors: Shan 2 Member–He 8 Member(Guadalupian–Lopingian, Permian), Southeast Ordos Basin, North China

The Shan 2 Member, Shan 1 Member and He 8 Member of the Mid-Late Permian Shanxi and lower Xiashihezi formations, in the southeastern Ordos Basin, together comprise -150 m of deltaic deposits. This sequence records an overall evolution from deep marine environment to shallow lake associated with braided river, braided river delta and meandering river delta. Core description, well log interpretation, and stable isotope analysis, including carbon, oxygen and strontium, were conducted to understand the sedimentary evolution of Shan 2 to He 8 Member. The Shanxi Formation, which consists of the Shan 2 and Shan 1 members, is characterized by a tidal-influenced meandering river delta environment and a higher j13C value and S7Sr/S6Sr ratio and a lower jlSo value. The He 8 Member, the basal part of the Xiashihezi Formation, is featured by a braided river to braided river delta system and a lower j13C value, S7Sr/S6Sr ratio, and a higher jlSo value. Four third-order depositional sequences separated by five sequence boundaries are determined. Coarsening upward sequences of the Shan 2 Member-He 8 Member indicate a general regression trend, which can be correlated to global sea-level fall occurring during the Roadian-Wuchiapingian, as also evidenced by previous published zircon U-Pb results. The coal-bearing sequence （Shanxi Formation） to non-coal-bearing sequence （He 8 Member）, as well as a decrease of 87Sr/86Sr, suggest a trend from humid to arid climates. A combined effect of sea-level drop and a small uplift at the end of Shanxi Formation are proposed.