Application of Serial Port in Industrial Computer System

In an industrial computer control system, if a communication with a single chip computer built with the aid of serial port I/O ports can be got easily to connect with equipment. Meanwhile, the system reliability would be improved and the system cost would be reduced.To save ±15 V power supply and electrical level convert circuit,the author provide a simple interface circuit and operational procedure between PC and the single chip computer in this paper. The application of multithread is introduced and the advantages of data acquisition and processing with multithread are also analyzed.

Serial Communications Programming in Windows95 with API Functions

This paper introduces the usage of these functions. It presents the technique of how to program with them to perform the serial communications between a computer and other digital devices by the serial porst in Windows95. The related sample codes of the applications of this technique written in C++ programming language are also given. This technique is applied successfully to receive the data of the radio noise from a frequency monitor.

The Serial Communication Based on Multithreading Technique of Windows

Present a kind of method which is used to communicate between serial serial port and peripheral equipment dynamicly and real-time using multithreading technique based on the basic principle of communication and multitasking mechanism in the circumstance of Windows. This method resolves the question of Real-time answering in the serial communication validly, reduces losing rate of data and improves reliability of system. This article presents a general method used in the serial communication which is practical.

Optimization of Serial Port of General Flex Pendant for Industrial Robot

In order to further improve the serial ports communication mode of the general Flex Pendant for industrial robot,a multiple serial communication mode is put forward. It is used to meet the stability of data transmission,transmission distance,transmission speed,anti-interference and cost-effective. Using ADUM1201 single direction dual channel digital isolator,two pieces of MAX13487 E and a piece of MAX3232 chip to transmit data and files, and to control chip’ s electrical level. Selecting the RS232, RS422 and RS485 communication mode,the serial ports of the general Flex Pendant of industrial robot is optimized.

On-Board Data Acquisition System for Automatic Shift System of Vehicle

Data acquisition, analysis and calibrating system affiliated with the vehicle is developed for the research on the automatic shift system (ASS). Considering the vehicle’s hard environment such as vibration, high and low temperature, electromagnetic disturbance and so on, the most suitable project is selected. PC104 transfers data with ECU by serial communication and a solid state disk is used as a FLASH ROM. Some techniques including frequency division of data is adopted in the software design in order to ensure the sampling frequency. The analysis and debug software is also contrived according to the characteristic of the ASS. The system plays an important role in the development of the ASS because of the good reliability and practicability in the application.

A Novel Design of Efficient Multi-channel UART Controller Based on FPGA

In traditional universal asynchronous receiver transmitter （UART） controller, the data transmission is inefficient and the data bus utilization ratio is low. A novel design is provided to solve these problems. The architecture of the system is introduced, the flow charts of data processing as well as the implementation state machine are also presented in detail. This paper is concluded by comparing the performance of this design, which is realized on field programmable gate army （FPGA） using Verilog hardware description language （HDL）, with other traditional UART controllers.

DESIGN OF A NOVEL DEXTEROUS ROBOT HAND

In the robotic community more and more hands are developed. Based on theexperience of HIT Hand and DLR Hand II, a smaller and easier manufactured dexterous robot hand withmultisen-sory function and high integration is jointly developed. The prototype of the hand issuccessfully built. It has 4 fingers in total 13-DOFs (degree of freedom). Each finger has 3-DOFsand 4 joints, the last 2 joints are mechanically coupled by means of four-bar linkage mechanism. Italso has an additional DOF to realize motion of the thumb relative to the palm. The fingertip forcecan reach up to 10 N. Full integration of mechanical body, actuation system, multisensory system andelectronics is a significant feature. DSP based control system is implemented in PCI busarchitecture and the serial communication between the hand and DSP needs only 2 lines.

Intelligent Control System of Textile Mill's Air-conditioning

This paper briefly analyzes the present situation of textile mill＇s air-conditioning system. Since it is difficult to establish detailed math model to control a textile mill＇s airconditioning system because of the influence of various factors such as the differences in seasons, regions, etc., most air-conditioning equipment can not be controlled automatically. This paper suggests utilizing multi-function data acquisRion card to collect the data about the temperature and humidity of a workshop, processing the data on a PC, comparing them with the expert database, and then using the 485 serial port expanding module to output the parameters, which are used to control the inverter, so that the purpose of adjusting the temperature and humidity of the workshop is achieved.

A VHDL application for kinematic equation solutions of multi-degree-of-freedom systems

As kinematic calculations are complicated, it takes a long time and is difficult to get the desired accurate result with a single processor in real-time motion control of multi-degree-of-freedom(MDOF) systems. Another calculation unit is needed, especially with the increase in the degree of freedom. The main central processing unit(CPU) has additional loads because of numerous motion elements which move independently from each other and their closed-loop controls. The system designed is also complicated because there are many parts and cabling. This paper presents the design and implementation of a hardware that will provide solutions to these problems. It is realized using the Very High Speed Integrated Circuit Hardware Description Language(VHDL) and field-programmable gate array(FPGA). This hardware is designed for a six-legged robot and has been working with servo motors controlled via the serial port. The hardware on FPGA calculates the required joint angles for the feet positions received from the serial port and sends the calculated angels to the servo motors via the serial port. This hardware has a co-processor for the calculation of kinematic equations and can be used together with the equipment that would reduce the electromechanical mess. It is intended to be used as a tool which will accelerate the transition from design to application for robots.