Simultaneously improving the EMI shielding performances and mechanical properties of CF/PEKK composites via MXene interfacial modification

In this study, two-dimensional MXene (Ti3 C2 Tx ) was employed to modify the interface of carbon fiber-reinforced polyetherketoneketone (CF/PEKK) composites, in order to simultaneously improve the electromagnetic interference (EMI) shielding performances and mechanical properties. The obtained CF/PEKK composites possessed outstanding EMI and mechanical performances, as anticipated. Specifically, the CF/PEKK composites modified with MXene at 1 mg mL–1 exhibited an excellent EMI shielding effectiveness of 65.2 dB in the X-band, a 103.1% enhancement compared with the unmodified CF/PEKK composites. The attractive EMI shielding performances of CF/PEKK composites originated from enhanced ohmic losses and multiple reflections of electromagnetic waves with the help of the MXene and CF layers. In addition, CF/PEKK composites achieved the best mechanical properties by optimizing the dispersion concentration of MXene to 0.1 mg mL–1 . The flexural strength, flexural modulus, and interlaminar shear strength of CF/PEKK composites reached 1127 MPa, 81 GPa, and 89 MPa, which were 28.5%, 9.5%, and 29.7% higher than that of the unmodified CF/PEKK composites, respectively. Such improvement in mechanical properties could be ascribed to the comprehensive effect of mechanical interlocking, hydrogen bonds, and Van der Waals forces between the introduced MXene and CF, PEKK, respectively.

Flexible and ultrathin dopamine modified MXene and cellulose nanofiber composite films with alternating multilayer structure for superior electromagnetic interference shielding performance

With the development of modern electronics,especially the next generation of wearable electromagnetic interference(EMI)shielding materials requires flexibility,ultrathin,lightweight and robustness to protect electronic devices from radiation pollution.In this work,the flexible and ultrathin dopamine modified MXene@cellulose nanofiber(DM@CNF)composite films with alternate multilayer structure have been developed by a facile vacuum filtration induced self-assembly approach.The multilayered DM@CNF composite films exhibit improved mechanical properties compared with the homogeneous DM/CNF film.By adjusting the layer number,the multilayered DM3@CNF2 composite film exhibits a tensile strength of 48.14 MPa and a toughness of 5.28 MJ·m^(–3) with a thickness about 19μm.Interestingly that,the DM@CNF film with annealing treatment achieves significant improvement in conductivity(up to 17264 S·m^(–1))and EMI properties(SE of 41.90 dB and SSE/t of 10169 dB·cm^(2)·g–1),which still maintains relatively high mechanical properties.It is highlighted that the ultrathin multilayered DM@CNF film exhibits superior EMI shielding performance compared with most of the metal-based,carbon-based and MXene-based shielding materials reported in the literature.These results will offer an appealing strategy to develop the ultrathin and flexible MXene-based materials with excellent EMI shielding performance for the next generation intelligent protection devices.

Dual cross-linked MXene/cellulose nanofiber/nickel alginate film with improved mechanical properties and electromagnetic interference shielding performance

Electromagnetic interference pollution has raised urgent demand for the development of electromagnetic interference shielding materials.Transition metal carbides(MXenes)with excellent conductivity have shown great potential in electromagnetic interference(EMI)shielding materials,while the poor mechanical strength,flexibility,and structural stability greatly limit their further applications.Here,cellulose nanofibers and sodium alginate are incorporated with MXene nanosheets as flexible matrices to construct strong and flexible mussellike layered MXene/Cellulose nanofiber/Sodium Alginate composite films,and nickel ions are further introduced to induce metal coordination crosslinking of alginate units.Benefited from the dual-crosslinked network structure of hydrogen bonding and metal coordination,the tensile strength,Young’s modulus,and toughness of the MXene/cellulose nanofiber/nickel alginate composite film are significantly increased.After subsequent reduction by ascorbic acid,excess nickel ions are reduced to nickel nanoparticles and uniformly dispersed within the highly conductive composite film,which further improved its hysteresis loss effect toward the incident electromagnetic waves.Consequently,the MXene/cellulose nanofiber/nickel alginate-Ni composite film presents a considerably enhanced electromagnetic interference shielding effectiveness(47.17 dB)at a very low thickness of 29μm.This study proposes a feasible dual-crosslinking and subsequent reduction strategy to synergistically enhance the mechanical properties and electromagnetic interference shielding performance of MXene-based composite materials.

A double crosslinking MXene/cellulose nanofiber layered film for improving mechanical properties and stable electromagnetic interference shielding performance

With the discovery of the two-dimensional(2D) MXene, it shows a great application potential in the field of electromagnetic interference(EMI) shielding, but the mechanical brittleness and easy oxidation of MXene limit its wide application. For this reason, a double crosslinking strategy is provided to solve the above problems in a nacre-like “brick-mortar” layered MXene/cellulose nanofiber(MXene/CNF) film.Typically, the film was firstly suffered by dopamine modification, then was further reinforced by secondary Ca^(2+)bridging, so as to obtain excellent mechanical properties and antioxidative EMI shielding performance. Comparing with the single crosslinking, the double crosslinking strategy reveals a higher efficiency in improving the mechanical property. The mechanical strength and toughness of the double crosslinking MXene/CNF film can increase to 142.2 MPa and 9.48 MJ/m^(3), respectively. More importantly, while achieving good mechanical properties, the MXene composite film still holds a very stable EMI shielding performance of more than 44.6 dB when suffering from the oxidation treatment of hightemperature annealing, showing excellent anti-oxidation ability and environment tolerance. Therefore,this work provides a universal but effective double crosslinking strategy to solve the mechanical brittleness and easy oxidation of MXene-based composites, thus showing a huge potential in flexible EMI shielding applications.

Janus(BNNS/ANF)-(AgNWs/ANF)thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Highly thermal conductivity materials with excellent electromagnetic interference shielding and Joule heating performances are ideal for thermal management in the next generation of communication industry,artificial intelligence and wearable electronics.In this work,silver nanowires(AgNWs)are prepared using silver nitrate as the silver source and ethylene glycol as the solvent and reducing agent,and boron nitride(BN)is performed to prepare BN nanosheets(BNNS)with the help of isopropyl alcohol and ultrasonication-assisted peeling method,which are compounded with aramid nanofibers(ANF)prepared by chemical dissociation,respectively,and the(BNNS/ANF)-(AgNWs/ANF)thermal conductivity and electromagnetic interference shielding composite films with Janus structures are prepared by the"vacuum-assisted filtration and hot-pressing"method.Janus(BNNS/ANF)-(AgNWs/ANF)composite films exhibit"one side insulating,one side conducting"performance,the surface resistivity of the BNNS/ANF surface is 4.7×10^(13) Ω,while the conductivity of the AgNWs/ANF surface is 5,275 S/cm.And Janus(BNNS/ANF)-(AgNWs/ANF)composite film with thickness of 95 pm has a high in-plane thermal conductivity coefficient of 8.12 W/(m·K)and superior electromagnetic interference shielding effectiveness of 70 dB.The obtained composite film also has excellent tensile strength of 122.9 MPa and tensile modulus and 2.7 GPa.It also has good temperature-voltage response characteristics(high Joule heating temperature at low supply voltage(5 V,215.0℃),fast response time(10 s)),excellent electrical stability and reliability(stable and constant real-time relative resistance under up to 300 cycles and 1,500 s of tensile-bending fatigue work tests).