The agility and the flexibility of the current shop floor control systems have been limited so far, owing to the lack of structural flexibility and agility in its control software layer. Most of them are based on trad...The agility and the flexibility of the current shop floor control systems have been limited so far, owing to the lack of structural flexibility and agility in its control software layer. Most of them are based on traditional hierarchical architecture and the top down approach and depend structurally on their specific configuration and job scheduling. Not only can they hardly satisfactorily adapt to these increasing changes and disturbances, but also make the redevelopment and maintenance of shop floor control system (SFCS) to need high cost and much time. And SFCS based on the heterarchical architecture don′t provide a predictable and high performance system, especially not in the heterogeneous environments, where the resources are scarce and the current decisions have serious repercussions on the future performances. For this reason, the heterarchical control is hardly applied in industry. Obviously, it is necessary to develop a new structural framework of reconfigurable SFCS to improve their agility, flexibility and maintainability. This paper presents a holonic framework of reconfigurable SFCS based on holonic manufacturing concepts. The framework is composed of resource holons, product holons and other staff holons. The model of each holon and the co operative mechanisms of holons are described. To verify the proposed approach experimentally, a prototype reconfigurable SFCS for a flexible manufacturing shop floor producing discrete parts is implemented.展开更多
Based on the discussion of functions, components, control structure and network computing architecture of generic shop floor control (GSFC) in computer integrated manufacturing system (CIMS), the internal integrati...Based on the discussion of functions, components, control structure and network computing architecture of generic shop floor control (GSFC) in computer integrated manufacturing system (CIMS), the internal integration between components of GSFC and the external integration between GSFC and the other components of CIMS are studied. The integration models on the aspects of function, information, processing and interface are put forward. The integration models and the methods are implemented and applied in CIMS projects successfully.展开更多
Adopting distributed control architecture is the important developmentdirection for shop floor management and control system, is also the requirement of making it agile,intelligent and concurrent. Some key problems in...Adopting distributed control architecture is the important developmentdirection for shop floor management and control system, is also the requirement of making it agile,intelligent and concurrent. Some key problems in achieving distributed control architecture areresearched. An activity model of shop floor is presented as the requirement definition of theprototype system. The multi-agent based software architecture is constructed. How the core part inshop floor management and control system, production plan and scheduling is achieved. Thecooperation of different agents is illustrated. Finally, the implementation of the prototype systemis narrated.展开更多
This paper presents a further improved Production Activity Control Architecture to deal with the complexity of information by creating Sub-Producers and Sub-Movers which will not only give a better control at workstat...This paper presents a further improved Production Activity Control Architecture to deal with the complexity of information by creating Sub-Producers and Sub-Movers which will not only give a better control at workstation level but also reduce load on the Dispatcher. It also makes an analysis of the basic and improved PAC (Production Activity Control) Architecture in the Control System for Integrated Manufacturing. The PAC Architecture and the improvement will further enhance the flexibility and adaptability of the architecture in the ever changing environment of the Shop Floor Control (SFC) Systems.展开更多
Shop floor control （SFC） is responsible for the coordination and control of the manufacturing physical and information flow within the shop floor in the manufacturing system. Weaknesses of the production activity co...Shop floor control （SFC） is responsible for the coordination and control of the manufacturing physical and information flow within the shop floor in the manufacturing system. Weaknesses of the production activity control （PAC） architecture of the shop floor are addressed by the Maglica＇s new system architecture. This architecture gives rise to unlimited number of movers and producers thus evolving more complex but decentralized architecture. Beijing Institute of Technology - production activity control （BIT-PAC） architecture introduces an idea of sub-producars and sub-movers thus reducing the complexity of the architecture. All the equipments including sub-producars and sub-movers are considered to be passive in the proposed shop floor information system. The dissemination of information from sub-producers and sub-movers is done manually through a PC. Proposed BIT-PAC SFC architecture facilitates the information flow from shop floor to the other area of the organization. Effective use of interact information services （IIS） and SQL2000 is done along with the ASP.NET technology to implement the application logic. Applicability of the software based on BIT-PAC architecture is checked by running application software on a network PC that supports the dynamic flow of information from sub-producers and sub-movers to the other parts of the organization. Use of software is also shown at the end for BIT training workshop thus supporting the use of SFC architecture for similar kind of environments.展开更多
Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization...Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.展开更多
为了减少装配作业车间内因物料齐套产生的等待浪费,使具有装配约束的关联零件加工进度得到有效协同,设计一类卡片导航平衡控制系统(control of balance by card-based navigation,COBACABANA)。其基于两类卡片循环回路实现任务投放与作...为了减少装配作业车间内因物料齐套产生的等待浪费,使具有装配约束的关联零件加工进度得到有效协同,设计一类卡片导航平衡控制系统(control of balance by card-based navigation,COBACABANA)。其基于两类卡片循环回路实现任务投放与作业分派的可视化进度协同控制逻辑。本文详细介绍系统的运行机制和系统控制参量,通过构建一般化的装配作业车间仿真模型,探讨在不同装配关联度下各控制参量的性能变化。实验结果表明,COBACABANA系统性能良好,并且选择合适的控制参量就能够有效提升关联零件的进度协同性。展开更多
The planning and scheduling in real shop floor is actually achieved by coordination between different persons. In this process, cooperation is mainstream, but competition also exists, for example, the competition betw...The planning and scheduling in real shop floor is actually achieved by coordination between different persons. In this process, cooperation is mainstream, but competition also exists, for example, the competition between different groups, operators with the same skill, etc. In multi-agent based shop floor management and control system, this competition and cooperation relation must be embodied. The general process of shop floor production planning and scheduling is studied, and a colored Petri-net model for the competition and cooperation process of three main agents in such system to achieve shop floor production planning and scheduling is presented. The evaluating method of bids in bidding process that especially embodies the competition relationship is also presented. This colored Petri-net model gives a clear illustration of this complex coordination process to system designers, effectively promotes the cooperative development.展开更多
In order to overcome the weakness of the former production activity control （PAC） architecture, this paper presents an improved PAC architecture. The BIT-PAC architecture has been applied with the use of information...In order to overcome the weakness of the former production activity control （PAC） architecture, this paper presents an improved PAC architecture. The BIT-PAC architecture has been applied with the use of information technology. It facilitates the information flow from Shop Floor to other areas of the organization and makes the organizations more integrated and productive. This architecture also facilitates the expansion of the Shop Floor functions without disturbing the basic infrastructure. Effectiveness of the BIT-PAC architecture was checked by developing and running application software on a network PC which has supported the dynamic flow of information from Sub-Producers and Sub-Movers to other areas of organization.展开更多
文摘The agility and the flexibility of the current shop floor control systems have been limited so far, owing to the lack of structural flexibility and agility in its control software layer. Most of them are based on traditional hierarchical architecture and the top down approach and depend structurally on their specific configuration and job scheduling. Not only can they hardly satisfactorily adapt to these increasing changes and disturbances, but also make the redevelopment and maintenance of shop floor control system (SFCS) to need high cost and much time. And SFCS based on the heterarchical architecture don′t provide a predictable and high performance system, especially not in the heterogeneous environments, where the resources are scarce and the current decisions have serious repercussions on the future performances. For this reason, the heterarchical control is hardly applied in industry. Obviously, it is necessary to develop a new structural framework of reconfigurable SFCS to improve their agility, flexibility and maintainability. This paper presents a holonic framework of reconfigurable SFCS based on holonic manufacturing concepts. The framework is composed of resource holons, product holons and other staff holons. The model of each holon and the co operative mechanisms of holons are described. To verify the proposed approach experimentally, a prototype reconfigurable SFCS for a flexible manufacturing shop floor producing discrete parts is implemented.
文摘Based on the discussion of functions, components, control structure and network computing architecture of generic shop floor control (GSFC) in computer integrated manufacturing system (CIMS), the internal integration between components of GSFC and the external integration between GSFC and the other components of CIMS are studied. The integration models on the aspects of function, information, processing and interface are put forward. The integration models and the methods are implemented and applied in CIMS projects successfully.
基金This project is supported by National Natural Science Foundation of China(No.50105006,No.59990470)(No.2001AA412140).
文摘Adopting distributed control architecture is the important developmentdirection for shop floor management and control system, is also the requirement of making it agile,intelligent and concurrent. Some key problems in achieving distributed control architecture areresearched. An activity model of shop floor is presented as the requirement definition of theprototype system. The multi-agent based software architecture is constructed. How the core part inshop floor management and control system, production plan and scheduling is achieved. Thecooperation of different agents is illustrated. Finally, the implementation of the prototype systemis narrated.
文摘This paper presents a further improved Production Activity Control Architecture to deal with the complexity of information by creating Sub-Producers and Sub-Movers which will not only give a better control at workstation level but also reduce load on the Dispatcher. It also makes an analysis of the basic and improved PAC (Production Activity Control) Architecture in the Control System for Integrated Manufacturing. The PAC Architecture and the improvement will further enhance the flexibility and adaptability of the architecture in the ever changing environment of the Shop Floor Control (SFC) Systems.
基金This project is supported by Beijing City Key Discipline Fund, China (No.XK100070424).
文摘Shop floor control （SFC） is responsible for the coordination and control of the manufacturing physical and information flow within the shop floor in the manufacturing system. Weaknesses of the production activity control （PAC） architecture of the shop floor are addressed by the Maglica＇s new system architecture. This architecture gives rise to unlimited number of movers and producers thus evolving more complex but decentralized architecture. Beijing Institute of Technology - production activity control （BIT-PAC） architecture introduces an idea of sub-producars and sub-movers thus reducing the complexity of the architecture. All the equipments including sub-producars and sub-movers are considered to be passive in the proposed shop floor information system. The dissemination of information from sub-producers and sub-movers is done manually through a PC. Proposed BIT-PAC SFC architecture facilitates the information flow from shop floor to the other area of the organization. Effective use of interact information services （IIS） and SQL2000 is done along with the ASP.NET technology to implement the application logic. Applicability of the software based on BIT-PAC architecture is checked by running application software on a network PC that supports the dynamic flow of information from sub-producers and sub-movers to the other parts of the organization. Use of software is also shown at the end for BIT training workshop thus supporting the use of SFC architecture for similar kind of environments.
文摘Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.
文摘为了减少装配作业车间内因物料齐套产生的等待浪费,使具有装配约束的关联零件加工进度得到有效协同,设计一类卡片导航平衡控制系统(control of balance by card-based navigation,COBACABANA)。其基于两类卡片循环回路实现任务投放与作业分派的可视化进度协同控制逻辑。本文详细介绍系统的运行机制和系统控制参量,通过构建一般化的装配作业车间仿真模型,探讨在不同装配关联度下各控制参量的性能变化。实验结果表明,COBACABANA系统性能良好,并且选择合适的控制参量就能够有效提升关联零件的进度协同性。
基金Supported partly by the Hi-tech Program of China( China86 3) ( No.86 3-5 11-943-0 0 9) and the National Natural Sci-ence Foundation of China( No.5 9990 470 )
文摘The planning and scheduling in real shop floor is actually achieved by coordination between different persons. In this process, cooperation is mainstream, but competition also exists, for example, the competition between different groups, operators with the same skill, etc. In multi-agent based shop floor management and control system, this competition and cooperation relation must be embodied. The general process of shop floor production planning and scheduling is studied, and a colored Petri-net model for the competition and cooperation process of three main agents in such system to achieve shop floor production planning and scheduling is presented. The evaluating method of bids in bidding process that especially embodies the competition relationship is also presented. This colored Petri-net model gives a clear illustration of this complex coordination process to system designers, effectively promotes the cooperative development.
文摘In order to overcome the weakness of the former production activity control （PAC） architecture, this paper presents an improved PAC architecture. The BIT-PAC architecture has been applied with the use of information technology. It facilitates the information flow from Shop Floor to other areas of the organization and makes the organizations more integrated and productive. This architecture also facilitates the expansion of the Shop Floor functions without disturbing the basic infrastructure. Effectiveness of the BIT-PAC architecture was checked by developing and running application software on a network PC which has supported the dynamic flow of information from Sub-Producers and Sub-Movers to other areas of organization.
