The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor ...The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ~ 150nm thick and the thickness ratio between front and rear active layers lies between 1:1 and 1:2.展开更多
A new structure containing negative refractive index dielectric layer(NRIDL) is introduced into microcavity. The properties of the new microcavity organic light-emitting devices(MOLEDs) are investigated. In the experi...A new structure containing negative refractive index dielectric layer(NRIDL) is introduced into microcavity. The properties of the new microcavity organic light-emitting devices(MOLEDs) are investigated. In the experiment, the transfer matrix method is adopted. The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail. Compared with the electroluminescence spectra of non-NRIDL diodes, the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance. The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.展开更多
We designed and fabricated a smart microcavity sensor with a vertically coupled structure on the end face of a multi-core fiber using two-photon lithography technology. The influence of gap in vertical coupling struct...We designed and fabricated a smart microcavity sensor with a vertically coupled structure on the end face of a multi-core fiber using two-photon lithography technology. The influence of gap in vertical coupling structure on the resonance characteristics of bonding and anti-bonding modes in the transmission spectrum was studied through simulation and experiments. The results indicate that the bonding and anti-bonding modes generated by the vertical coupling of the two microcavities, as well as the changes in the radius and refractive index of the micro-toroid, and the distance between the microcavities caused by the absorption of vapor during the gas sensing process, exhibit different wavelength shifts for the two resonant modes. Smart microcavity sensors exhibit sensitivity and sensing characteristics. .展开更多
A systematic study has been conducted on microcavity organic light emitting diodes(OLEDs)based on green,red and blue phosphorescent emitters to elucidate the microcavity effects for different color emitters.We found t...A systematic study has been conducted on microcavity organic light emitting diodes(OLEDs)based on green,red and blue phosphorescent emitters to elucidate the microcavity effects for different color emitters.We found that the luminance output is determined by the reflectivity of the semitransparent electrode and the photopic response of the green,red and blue emitters.While the luminance enhancements of blue and red phosphorescent microcavity devices are small,a current efficiency as high as 224 cd A21 is obtained in the green phosphorescent microcavity OLEDs.展开更多
Organic semiconductor is one of the most promising luminescent and lasing materials that can be chemically synthesized with a controllable performance and possess high cross-section of stimulated emission[1].Organic s...Organic semiconductor is one of the most promising luminescent and lasing materials that can be chemically synthesized with a controllable performance and possess high cross-section of stimulated emission[1].Organic semiconductor laser diodes(OSLDs)can be prepared by simple processing technologies and integrated easily with other optoelectronic devices.As a result,OSLDs would展开更多
A novel type of microcavity organic light-emitting diode based on a porous silicon distributed Bragg reflector (PS-DBR) has first been achieved and its microstructure, optical, and electrical properties have also been...A novel type of microcavity organic light-emitting diode based on a porous silicon distributed Bragg reflector (PS-DBR) has first been achieved and its microstructure, optical, and electrical properties have also been investigated in detail. The microcavity is made up of the central active organic multilayer sandwiched between a top silver film and a bottom PS-DBR, formed by electrochemical etching of p++-Si substrate. The field- emission scanning electron microscopy cross-section images show the nanometer-scale layered structure and flat interfaces inside the microcavity. The reflectivity (relative to an Al mirror) of the PS-DBR is up to 99%, and the stopband is about 160 nm wide. Resonant cavity mode appears as a tip in the reflectivity spectrum of the Si-based organic multilayer films, which is a symbol that the Si-based organic multilayer structure is indeed a microcavity. The peak widths of the electroluminescence (EL) spectra from the cavities emitting green and red light are greatly reduced from 85 nm and 70 nm to 8 nm and 12 nm, respectively, as compared with those measured from non-cavity structures. Note that the EL emission from the cavity devices is single-mode, and the off-resonant optical modes are highly suppressed. Moreover, increases of a factor of about 6 and 4 of the resonant peak intensity from the cavities emitting green and red light are also observed, respectively. In addition, the current-brightness-voltage characteristics and effect parameters on the lifetime of the cavity devices are also discussed. The present technique for obtaining enhanced EL emission from Si-based organic microcavity may also be another novel effective method for realizing Si-based optoelectronics device integration.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 61565015the Western Light Talent Training Program of Chinese Academy of Sciences
文摘The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ~ 150nm thick and the thickness ratio between front and rear active layers lies between 1:1 and 1:2.
基金Natural Science Research Item of Education Department of Henan Province(2008A430009)Doctor Foundation of Henan Polytechnic University(B2008-22)
文摘A new structure containing negative refractive index dielectric layer(NRIDL) is introduced into microcavity. The properties of the new microcavity organic light-emitting devices(MOLEDs) are investigated. In the experiment, the transfer matrix method is adopted. The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail. Compared with the electroluminescence spectra of non-NRIDL diodes, the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance. The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.
文摘We designed and fabricated a smart microcavity sensor with a vertically coupled structure on the end face of a multi-core fiber using two-photon lithography technology. The influence of gap in vertical coupling structure on the resonance characteristics of bonding and anti-bonding modes in the transmission spectrum was studied through simulation and experiments. The results indicate that the bonding and anti-bonding modes generated by the vertical coupling of the two microcavities, as well as the changes in the radius and refractive index of the micro-toroid, and the distance between the microcavities caused by the absorption of vapor during the gas sensing process, exhibit different wavelength shifts for the two resonant modes. Smart microcavity sensors exhibit sensitivity and sensing characteristics. .
文摘A systematic study has been conducted on microcavity organic light emitting diodes(OLEDs)based on green,red and blue phosphorescent emitters to elucidate the microcavity effects for different color emitters.We found that the luminance output is determined by the reflectivity of the semitransparent electrode and the photopic response of the green,red and blue emitters.While the luminance enhancements of blue and red phosphorescent microcavity devices are small,a current efficiency as high as 224 cd A21 is obtained in the green phosphorescent microcavity OLEDs.
基金supported by the CAS Innovation Program, the National Natural Science Foundation of China (51503196, 61775211, 61704170, 61405195 and 61774154)the financial support from the State Key Laboratory of Luminescence and Applications
文摘Organic semiconductor is one of the most promising luminescent and lasing materials that can be chemically synthesized with a controllable performance and possess high cross-section of stimulated emission[1].Organic semiconductor laser diodes(OSLDs)can be prepared by simple processing technologies and integrated easily with other optoelectronic devices.As a result,OSLDs would
基金supported by the Chinese National Key Basic Research Special Fund(Grant No.2001CB610408)Science and Technology of Chongqing Municipality(Grant No.2003-7934).
文摘A novel type of microcavity organic light-emitting diode based on a porous silicon distributed Bragg reflector (PS-DBR) has first been achieved and its microstructure, optical, and electrical properties have also been investigated in detail. The microcavity is made up of the central active organic multilayer sandwiched between a top silver film and a bottom PS-DBR, formed by electrochemical etching of p++-Si substrate. The field- emission scanning electron microscopy cross-section images show the nanometer-scale layered structure and flat interfaces inside the microcavity. The reflectivity (relative to an Al mirror) of the PS-DBR is up to 99%, and the stopband is about 160 nm wide. Resonant cavity mode appears as a tip in the reflectivity spectrum of the Si-based organic multilayer films, which is a symbol that the Si-based organic multilayer structure is indeed a microcavity. The peak widths of the electroluminescence (EL) spectra from the cavities emitting green and red light are greatly reduced from 85 nm and 70 nm to 8 nm and 12 nm, respectively, as compared with those measured from non-cavity structures. Note that the EL emission from the cavity devices is single-mode, and the off-resonant optical modes are highly suppressed. Moreover, increases of a factor of about 6 and 4 of the resonant peak intensity from the cavities emitting green and red light are also observed, respectively. In addition, the current-brightness-voltage characteristics and effect parameters on the lifetime of the cavity devices are also discussed. The present technique for obtaining enhanced EL emission from Si-based organic microcavity may also be another novel effective method for realizing Si-based optoelectronics device integration.