SiC/7075 aluminum matrix composites were prepared by a liquid stirring method.The role of Ti facilitating the preparation of SiC/7075 aluminum matrix were studied by means of direct-reading spectrometer,scanning elect...SiC/7075 aluminum matrix composites were prepared by a liquid stirring method.The role of Ti facilitating the preparation of SiC/7075 aluminum matrix were studied by means of direct-reading spectrometer,scanning electron microscope,energy dispersive spectrometer,X-ray diffraction and the sessile drop method.The results show that the SiC content in the SiC/7075 composite increases with an increase of Ti addition.The addition of Ti can significantly improve the wettability of SiC/Al system,there is a critical value of above 0.5%of Ti content in improving the wettability of the Al/SiC system at 1173K.The temperature of the"non wetting-wetting"transition for the(Al-2Ti)/SiC system is about 1123K,the contact angle decreases to 88°at 200 seconds and reaches a stable contact angle of 28°at 2100 seconds.展开更多
在硅酸盐溶液中采用等离子体电解氧化技术在60%SiCP(体积分数)/2009铝基复合材料表面制备陶瓷膜。研究氧化膜的显微组织、成分、润湿性及其耐腐蚀性能,探讨SiC颗粒表面火花放电的产生机理。结果表明,来自硅酸盐溶液的不溶性化合物(SiO_(...在硅酸盐溶液中采用等离子体电解氧化技术在60%SiCP(体积分数)/2009铝基复合材料表面制备陶瓷膜。研究氧化膜的显微组织、成分、润湿性及其耐腐蚀性能,探讨SiC颗粒表面火花放电的产生机理。结果表明,来自硅酸盐溶液的不溶性化合物(SiO_(2))使SiC颗粒表面产生火花放电,Al-Si-O化合物中的缺陷为SiC颗粒表面放电电流的传导提供优先路径。1200s时铝基复合材料表面形成5.5μm厚的均匀膜层,膜层的表面自由能在40s时达到最大值37.10 m J/cm^(2),并在1200 s时下降到25.95 m J/cm^(2)。此外,等离子体电解氧化处理可以显著提高复合材料的耐蚀性。展开更多
基金the Natural Science Foundation of Shanxi Province,China(No.201801D121108)。
文摘SiC/7075 aluminum matrix composites were prepared by a liquid stirring method.The role of Ti facilitating the preparation of SiC/7075 aluminum matrix were studied by means of direct-reading spectrometer,scanning electron microscope,energy dispersive spectrometer,X-ray diffraction and the sessile drop method.The results show that the SiC content in the SiC/7075 composite increases with an increase of Ti addition.The addition of Ti can significantly improve the wettability of SiC/Al system,there is a critical value of above 0.5%of Ti content in improving the wettability of the Al/SiC system at 1173K.The temperature of the"non wetting-wetting"transition for the(Al-2Ti)/SiC system is about 1123K,the contact angle decreases to 88°at 200 seconds and reaches a stable contact angle of 28°at 2100 seconds.
基金sponsored by the National Natural Science Foundation of China(Nos.12105017,51671032)Beijing Municipal Natural Science Foundation,China(No.2172029)。
文摘在硅酸盐溶液中采用等离子体电解氧化技术在60%SiCP(体积分数)/2009铝基复合材料表面制备陶瓷膜。研究氧化膜的显微组织、成分、润湿性及其耐腐蚀性能,探讨SiC颗粒表面火花放电的产生机理。结果表明,来自硅酸盐溶液的不溶性化合物(SiO_(2))使SiC颗粒表面产生火花放电,Al-Si-O化合物中的缺陷为SiC颗粒表面放电电流的传导提供优先路径。1200s时铝基复合材料表面形成5.5μm厚的均匀膜层,膜层的表面自由能在40s时达到最大值37.10 m J/cm^(2),并在1200 s时下降到25.95 m J/cm^(2)。此外,等离子体电解氧化处理可以显著提高复合材料的耐蚀性。
