期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
Preparation, structural and electrical properties of zinc oxide grown on silicon nanoporous pillar array 被引量:2
1
作者 姚志涛 孙新瑞 +1 位作者 许海军 李新建 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第10期3108-3113,共6页
Polycrystalline thick film of zinc oxide (ZnO) is grown on a unique silicon substrate with a hierarchical structure, silicon nanoporous pillar array (Si-NPA), by using a vapour phase transport method. It is found ... Polycrystalline thick film of zinc oxide (ZnO) is grown on a unique silicon substrate with a hierarchical structure, silicon nanoporous pillar array (Si-NPA), by using a vapour phase transport method. It is found that as-grown ZnO film is composed of closely packed ZnO crystallites with an average size of -10 μm. The film resistivity of ZnO/SiNPA is measured to be -8.9Ωcm by the standard four probe method. The lengthwise Ⅰ-Ⅴ curve of ZnO/Si-NPA heterostructure is measured. Theoretical analysis shows that the carrier transport across ZnO/Si-NPA heterojunction is dominated by two mechanisms, i.e. a thermionic process at high voltages and a quantum tunnelling process at low voltages. 展开更多
关键词 silicon nanoporous pillar array (Si-NPA) ZnO/Si-NPA heterostructure thermionic process
下载PDF
Time-Resolved Photoluminescence Study of Silicon Nanoporous Pillar Array
2
作者 王小波 闫玲玲 +1 位作者 李勇 李新建 《Chinese Physics Letters》 SCIE CAS CSCD 2015年第9期136-139,共4页
A silicon nanoporous pillar array (Si-NPA) is thought to be a promising functional substrate for constructing a variety of Si-based optoelectronic nanodevices, due to its unique hierarchical structure and enhanced p... A silicon nanoporous pillar array (Si-NPA) is thought to be a promising functional substrate for constructing a variety of Si-based optoelectronic nanodevices, due to its unique hierarchical structure and enhanced physical properties. This makes the in-depth understanding of the photoluminescence (PL) of Si-NPA crucial for both scientific research and practical applications. In this work, the PL properties of Si-NPA are studied by measuring both the steady-state and time-resolved PL spectrum. Based on the experimental data, the three PL bands of Si-NPA, i.e., the ultraviolet band, the purple-blue plateau and the red band are assigned to the oxygen-excess defects in Si oxide or silanol groups at the surface of Si nanocrystallites (nc-Si), oxygen deficiency defects in Si oxide, and band-to-band transition of nc-Si under the frame of quantum confinement combining with the surface states like Si=O and Si-O^i bonds at the surface of nc-Si, respectively. These results may provide some novel insight into the PL process of Si-NPA and may be helpful for clarifying the PL mechanism. 展开更多
关键词 Time-Resolved Photoluminescence Study of silicon nanoporous pillar array NPA SI
下载PDF
Capacitive humidity sensing properties of carbon nanotubes grown on silicon nanoporous pillar array 被引量:1
3
作者 JIANG WeiFen XIAO ShunHua +2 位作者 ZHANG HuanYun DONG YongFen LI XinJian 《Science China(Technological Sciences)》 SCIE EI CAS 2007年第4期510-515,共6页
Multi-walled carbon nanotubes (CNTs) were grown on silicon nanoporous pillar array (Si-NPA) by thermal chemical vapor deposition method, and the structural and capacitive humidity sensing properties of CNT/Si-NPA were... Multi-walled carbon nanotubes (CNTs) were grown on silicon nanoporous pillar array (Si-NPA) by thermal chemical vapor deposition method, and the structural and capacitive humidity sensing properties of CNT/Si-NPA were studied. It was found that with the relative humidity (RH) changing from 11% to 95%, a device re-sponse of ~480% was achieved at the frequency of 50000 Hz, and a linear device response curve could be obtained by adopting longitudinal logarithmic coordinate. The response/recovery times were measured to be ~20 s and ~10 s, respectively, which indicated a rather fast response/recovery rate. The adsorption-desorption dynamic cycle experiments demonstrated the high measurement reproducibility of CNT/Si-NPA sensors. These excellent performances were attributed to the unique surface structure, morphology and chemical inertness of CNT/Si-NPA. 展开更多
关键词 capacitive humidity sensor carbon NANOTUBES (CNTs) silicon nanoporous pillar array (Si-NPA) CNT/Si-NPA
原文传递
纳米碳化硅/硅纳米孔柱阵列湿敏性能研究 被引量:1
4
作者 王海燕 陈红彦 +3 位作者 胡青飞 孟晓波 韩昌报 李新建 《传感技术学报》 CAS CSCD 北大核心 2011年第5期638-641,共4页
以硅纳米孔阵列(S i-NPA)为衬底,采用化学气相沉积法分别制备了S iC纳米颗粒/S i-NPA(nc-S iC/S i-NPA)和S iC纳米线/S i-NPA(nw-S iC/S i-NPA)复合体系,并对其表面成分和形貌、室温湿敏性能进行了表征。实验结果表明,nc-S iC/S i-NPA和... 以硅纳米孔阵列(S i-NPA)为衬底,采用化学气相沉积法分别制备了S iC纳米颗粒/S i-NPA(nc-S iC/S i-NPA)和S iC纳米线/S i-NPA(nw-S iC/S i-NPA)复合体系,并对其表面成分和形貌、室温湿敏性能进行了表征。实验结果表明,nc-S iC/S i-NPA和nw-S iC/S i-NPA均对水蒸气表现出灵敏的电容响应。当环境相对湿度从11%增加到95%,在100 Hz的测试频率下nc-S iC/S i-NPA的电容增加了750%,而nw-S iC/S i-NPA的电容增加了1050%。通过升湿和降湿动态过程,测得nc-S iC/S i-NPA的响应和恢复时间均为10 s,nw-S iC/S i-NPA的响应和恢复时间分别为100 s和150 s。分析表明,nc-S iC/S i-NPA、nw-S iC/S i-NPA对湿度的高度敏感性主要源于nc-S iC、nw-S iC所引起感应面积的巨大增加,而其较短的响应和恢复时间则归因于阵列结构为水蒸气提供了有效的传输通道。 展开更多
关键词 湿度传感器 sic/硅纳米孔柱阵列 化学气相沉积
下载PDF
表面碳化的硅纳米孔柱阵列的H2S室温电容传感特性
5
作者 王海燕 王伶俐 +1 位作者 胡青飞 李新建 《传感技术学报》 CAS CSCD 北大核心 2012年第1期1-5,共5页
通过将硅纳米孔柱阵列(Si-NPA)进行高温碳化处理,制备出一种SiC/Si-NPA复合纳米体系。对SiC/Si-NPA的表面形貌和结构表征揭示,生长于Si-NPA上的SiC薄膜由具有立方结构的SiC纳米颗粒组成,厚度为~200 nm。SiC/Si-NPA整体上保持了Si-NPA... 通过将硅纳米孔柱阵列(Si-NPA)进行高温碳化处理,制备出一种SiC/Si-NPA复合纳米体系。对SiC/Si-NPA的表面形貌和结构表征揭示,生长于Si-NPA上的SiC薄膜由具有立方结构的SiC纳米颗粒组成,厚度为~200 nm。SiC/Si-NPA整体上保持了Si-NPA原有的柱状阵列结构特征。对浓度介于0~1 200×10-6的H2S气体的室温传感性能测试表明,SiC/Si-NPA对H2S气体的电容响应灵敏度可高达790%,而其对400×10-6浓度H2S气体的响应和恢复时间则分别为170 s和200 s,元件具有较好的测量重复性和稳定性。SiC/Si-NPA可能是一种室温条件下较为理想的H2S气体传感材料。 展开更多
关键词 H2S气体传感器 sic 硅纳米孔柱阵列 高温碳化
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部