The Capture and Catalytic Conversion of CO_(2) by Dendritic Mesoporous Silica-Based Nanoparticles

Dendritic mesoporous silica nanoparticles own three-dimensional center-radial channels and hierarchical pores,which endows themselves with super-high specific surface area,extremely large pore volumes,especially accessible internal spaces,and so forth.Dissimilar guest species(such as organic groups or metal nanoparticles)could be readily decorated onto the interfaces of the channels and pores,realizing the functionalization of dendritic mesoporous silica nanoparticles for targeted applications.As adsorbents and catalysts,dendritic mesoporous silica nanoparticles-based materials have experienced nonignorable development in CO_(2)capture and catalytic conversion.This comprehensive review provides a critical survey on this pregnant subject,summarizing the designed construction of novel dendritic mesoporous silica nanoparticles-based materials,the involved chemical reactions(such as CO_(2)methanation,dry reforming of CH_(4)),the value-added chemicals from CO_(2)(such as cyclic carbonates,2-oxazolidinones,quinazoline-2,4(1H,3H)-diones),and so on.The adsorptive and catalytic performances have been compared with traditional silica mesoporous materials(such as SBA-15 or MCM-41),and the corresponding reaction mechanisms have been thoroughly revealed.It is sincerely expected that the in-depth discussion could give materials scientists certain inspiration to design brand-new dendritic mesoporous silica nanoparticles-based materials with superior capabilities towards CO_(2)capture,utilization,and storage.

Porous silica nano-flowers stabilized Pt-Pd bimetallic nanoparticles as heterogeneous catalyst for efficiently synthesizing guaiacol from 2-methoxycyclohexanol

Porous silica nano-flowers(KCC-1)immobilized Pt-Pd alloy NPs(Pt-Pd/KCC-1)with different mass ratios of Pd and Pt were successfully prepared by a facile in situ one-step reduction,using hydrazinium hydroxide as a reducing agent.The as-synthesized silica nanospheres possess radial fibers with a distance of 15 nm,exhibiting a high specific surface area(443.56 m^(2)·g^(-1)).Meanwhile,the obtained Pt-Pd alloy NPs are uniformly dispersed on the silica surface with a metallic particle size of 4-6 nm,which exist as metallic Pd and Pt on the surface of monodisperse KCC-1,showing the transfer of electrons from Pd to Pt.The as-synthesized 2.5%Pt-2.5%Pd/KCC-1 exhibited excellent catalytic activity and stability for the continuous dehydrogenation of 2-methoxycyclohexanol to prepare guaiacol.Compared with Pt or Pd single metal supported catalysts,the obtained 2.5%Pt-2.5%Pd/KCC-1 shows 97.2%conversion rate of 2-methoxycyclohexanol and 76.8%selectivity for guaiacol,which attributed to the significant synergistic effect of bimetallic Pt-Pd alloy NPs.Furthermore,turn over frequency value of the obtained 2.5%Pt-2.5%Pd/KCC-1 NPs achieved 4.36 s^(-1),showing higher catalytic efficiency than other two monometallic catalysts.Reaction pathways of dehydro-aromatization of 2-methoxycyclohexanol over the obtained catalyst are proposed.Consequently,the obtained 2.5%Pt-2.5%Pd/KCC-1 NPs prove their potential in the dehydrogenation of 2-methoxycyclohexanol,while the kinetics and mechanistic study of the dehydrogenation reaction over the catalyst in a continuous fixed-bed reactor may provide valuable information for the development of green,outstanding and powerful synthetic pathway of guaiacol.

Selective CO_(2)Electroreduction to Multi-Carbon Products on Organic-Functionalized CuO Nanoparticles by Local Micro-Environment Modulation

Surface functionalization of Cu-based catalysts has demonstrated promising potential for enhancing the electrochemical CO_(2)reduction reaction(CO_(2)RR)toward multi-carbon(C2+)products,primarily by suppressing the parasitic hydrogen evolution reaction and facilitating a localized CO_(2)/CO concentration at the electrode.Building upon this approach,we developed surface-functionalized catalysts with exceptional activity and selectivity for electrocatalytic CO_(2)RR to C_(2+)in a neutral electrolyte.Employing CuO nanoparticles coated with hexaethynylbenzene organic molecules(HEB-CuO NPs),a remarkable C_(2+)Faradaic efficiency of nearly 90%was achieved at an unprecedented current density of 300 mA cm^(-2),and a high FE(>80%)was maintained at a wide range of current densities(100-600 mA cm^(-2))in neutral environments using a flow cell.Furthermore,in a membrane electrode assembly(MEA)electrolyzer,86.14%FEC2+was achieved at a partial current density of 387.6 mA cm^(-2)while maintaining continuous operation for over 50 h at a current density of 200 mA cm^(-2).In-situ spectroscopy studies and molecular dynamics simulations reveal that reducing the coverage of coordinated K⋅H2O water increased the probability of intermediate reactants(CO)interacting with the surface,thereby promoting efficient C-C coupling and enhancing the yield of C_(2+)products.This advancement offers significant potential for optimizing local micro-environments for sustainable and highly efficient C_(2+)production.

Improvement of the piezoelectricity of PVDF-HFP by CoFe_(2)O_(4)nanoparticles

High piezoelectric composite films composed of poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)and ferromagnetic cobalt ferrite(CoFe_(2)O_(4))(0.00 wt%to 0.2 wt%)are prepared by a solution casting method accompanied by uniaxial stretching and high electric field poling.The decisive effect of the poling electric field on the power generating capability was confirmed by the experiments.For pure PVDF-HFP films,when the maximum electric field Emax is 120 MV/m,the calibrated open circuit voltage reaches 2.93 V,which is much higher than those poled at lower electric fields(70 MV/m:1.41 V;90 MV/m:2.11 V).Furthermore,the addition of CoFe_(2)O_(4)also influences the piezoelectricity dramatically.In the samples containing 0.15 wt%CoFe_(2)O_(4),the calibrated open circuit voltage increases to the maximum value of 3.57 V.Meanwhile,the relative fraction of theβ-phase and the crystallinity degree are 99%and 48%,respectively.The effects of CoFe_(2)O_(4)nanoparticles on initial crystallization,uniaxial stretching and high electric field poling are investigated by XRD,FTIR and DSC.

Functionalized selenium nanoparticles ameliorated acetaminophen-induced hepatotoxicity through synergistically triggering PKCδ/Nrf2 signaling pathway and inhibiting CYP 2E1

Selenium nanoparticles(SeNPs)have been demonstrated potential for use in diseases associated with oxidative stress.Functionalized SeNPs with lower toxicity and higher biocompatibility could bring better therapeutic activity and clinical application value.Herein,this work was conducted to investigate the protective effect of Pleurotus tuber-regium polysaccharide-protein complex funtionnalized SeNPs(PTR-SeNPs)against acetaminophen(APAP)-induced oxidative injure in HepG2 cells and C57BL/6J mouse liver.Further elucidation of the underlying molecular mechanism,in particular their modulation of Nrf2 signaling pathway was also performed.The results showed that PTR-SeNPs could significantly ameliorate APAP-induced oxidative injury as evidenced by a range of biochemical analysis,histopathological examination and immunoblotting study.PTR-SeNPs could hosphorylate and activate PKCδ,depress Keap1,and increase nuclear accumulation of Nrf2,resulting in upregulation of GCLC,GCLM,HO-1 and NQO-1 expression.Besides,PTR-SeNPs suppressed the biotransformation of APAP to generate intracellular ROS through CYP 2E1 inhibition,restoring the mitochondrial morphology.Furthermore,the protective effect of PTR-SeNPs against APAP induced hepatotoxicity was weakened as Nrf2 was depleted in vivo,indicating the pivotal role of Nrf2 signaling pathway in PTR-SeNPs mediated hepatoprotective efficacy.Being a potential hepatic protectant,PTR-SeNPs could serve as a new source of selenium supplement for health-promoting and biomedical applications.

Effect of Fe_(2)O_(3)nanoparticle on the interface microstructure and properties of Al/Cu plasma arc fusion-brazing joints

The lap joint of T2 copper plate and 1060 pure aluminum plate was made by using the plasma arc welding method with adding Fe_(2)O_(3)nanoparticles in different proportions.The research analysis found that the thickness of the IMC(intermetallic compound)and eutect-ic region decreased after the addition of nanoparticles due to its inhibitory effect.When the proportion of Fe_(2)O_(3)nanoparticles is 3%,the in-terface intermetallic compound layer is the thinnest.However,after this ratio is continuously increased,the inhibition effect is weakened by the agglomeration of nanoparticles,and the thickness begins to increase significantly.The mechanical and electrical properties of the joint are mainly affected by the thickness of the IMC layer.Excessive nanoparticles are agglomerated into large particles with high resistivity.Therefore,the tensile strength and relative electrical conductivity of the joint are first increasing and then decreasing with the increase of nanoparticle ratio.When the proportion of nanoparticles is 3%,the tensile strength and electrical conductivity are maximum.

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

Effect of Mo and ZrO_(2)nanoparticles addition on interfacial properties and shear strength of Sn58Bi/Cu solder joint

The influence of Mo and ZrO_(2)nanoparticles addition on the interfacial properties and shear strength of Sn58Bi solder joint was investigated.The interfacial microstructures of Sn58Bi/Cu,Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints were analysed using a scanning electron microscope(SEM)coupled with energy dispersive X-ray(EDX)and the X-ray diffraction(XRD).Intermetallic compounds(IMCs)of MoSn_(2)are detected in the Sn58Bi+Mo/Cu solder joint,while SnZr,Zr_(5)Sn_(3),ZrCu and ZrSn_(2)are detected in Sn58Bi+ZrO_(2)/Cu solder joint.IMC layers for both composite solders comprise of Cu_(6)Sn_(5) and Cu_(3)Sn.The SEM images of these layers were used to measure the IMC layer’s thickness.The average IMC layer’s thickness is 1.4431μm for Sn58Bi+Mo/Cu and 0.9112μm for Sn58Bi+ZrO_(2)/Cu solder joints.Shear strength of the solder joints was investigated via the single shear lap test method.The average maximum load and shear stress of the Sn58Bi+Mo/Cu and Sn58Bi+ZrO_(2)/Cu solder joints are increased by 33%and 69%,respectively,as compared to those of the Sn58Bi/Cu solder joint.By comparing both composite solder joints,the latter prevails better as adding smaller sized ZrO_(2)nanoparticles improves the interfacial properties granting a stronger solder joint.

Experimental investigation of the effects of oil asphaltene content on CO_(2) foam stability in the presence of nanoparticles and sodium dodecyl sulfate

Foam stability tests were performed using sodium dodecyl sulfate(SDS)surfactant and SiO2 nanoparticles as foaming system at different asphaltene concentrations,and the half-life of CO_(2) foam was measured.The mechanism of foam stability reduction in the presence of asphaltene was analyzed by scanning electron microscope(SEM),UV adsorption spectrophotometric concentration measurement and Zeta potential measurement.When the mass ratio of synthetic oil to foam-formation suspension was 1:9 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 751 s to 239 s,and the half-life of SDS/silica-stabilized foams decreased from 912 s to 298 s.When the mass ratio of synthetic oil to foam-formation suspension was 2:8 and the asphaltene mass fraction increased from 0 to 15%,the half-life of SDS-stabilized foams decreased from 526 s to 171 s,and the half-life of SDS/silica-stabilized foams decreased from 660 s to 205 s.In addition,due to asphaltene-SDS/silica interaction in the aqueous phase,the absolute value of Zeta potential decreases,and the surface charges of particles reduce,leading to the reduction of repulsive forces between two interfaces of thin liquid film,which in turn,damages the foam stability.

SiO_(2)-PEGMA/AA改性复合材料的制备及对油井水泥性能提升研究

通过自由基聚合将聚乙二醇甲基丙烯酸酯(PEGMA)和丙烯酸(AA)接枝到SiO_(2)纳米颗粒上,制备出SiO_(2)-PEGMA/AA复合材料。对制备的复合材料结构进行表征,研究了SiO_(2)-PEGMA/AA复合材料对固井水泥浆性能影响规律,分析了固井水泥石微观结构。结果表明,该复合材料成功接枝了PEGMA和AA,复合材料热稳定性达到220℃,分散性好,颗粒粒度为纳米级。在加量为1%时,该复合材料能够显著提高水泥浆的流动性,其屈服应力低于0.01 Pa。与空白样品相比,75℃养护28 d的水泥石抗压强度比空白样品提高了57.8%。该复合材料能够促进水化硅酸钙凝胶的生成,填充水泥颗粒之间的孔隙,改善水泥的孔隙结构,养护3 d后平均孔径降低至41.8 nm。SiO_(2)-PEGMA/AA改性复合材料不仅可以有效提高水泥浆流动性,并能显著促进水泥水化并使水泥石结构致密化。

Fabrication of Cu_2O@Cu_2O core-shell nanoparticles and conversion to Cu_2O@Cu core-shell nanoparticles in solution

Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.

Rationally designed hollow carbon nanospheres decorated with S,P co-doped NiSe_(2) nanoparticles for high-performance potassium-ion and lithium-ion batteries

Hollow nanostructures with external shells and inner voids have been proved to greatly shorten the transport distance of ions/electrons and buffer volume change,especially for the large-sized potassium-ions in secondary batteries.In this work,hollow carbon(HC) nanospheres embedded with S,P co-doped NiSe_(2)nanoparticles are fabricated by "drop and dry" and "dissolving and precipitation" processes to form Ni(OH)2nanocrystals followed by annealing with S and P dopants to form nanoparticles.The resultant S,P-NiSe_(2)/HC composite exhibits excellent cyclic performance with 131.6 mA h g^(-1)at1000 mA g^(-1)after 3000 cycles for K^(+)storage and a capacity of 417.1 mA h g^(-1)at 1000 mA g^(-1)after1000 cycles for Li^(+)storage.K-ion full cells are assembled and deliver superior cycling stability with a ca pacity of 72.5 mA h g^(-1)at 200 mA g^(-1)after 500 cycles.The hollow carbon shell with excellent electrical conductivity effectively promotes the transporta tion and tolerates large volume variation for both K^(+)and Li^(+).Density functional theory calculations confirm that the S and P co-doping NiSe_(2) enables stronger adsorption of K^(+)ions and higher electrical conductivity that contributes to the improved electrochemical performance.

Double spatial confinement on ruthenium nanoparticles inside carbon frameworks as durable catalysts for a quasi-solid-state Li–O_(2) battery

The rational design of large-area exposure,nonagglomeration,and longrange dispersion of metal nanoparticles(NPs)in the catalysts is critical for the development of energy storage and conversion systems.Little attention has been focused on modulating and developing catalyst interface contact engineering between a carbon substrate and dispersed metal.Here,a highly dispersed ultrafine ruthenium(Ru)NP strategy by double spatial confinement is proposed,that is,incorporating directed growth of metal–organic framework crystals into a bacterial cellulose templating substrate to integrate their respective merits as an excellent electrocatalytic cathode catalyst for a quasi-solid-state Li–O_(2) battery.The porous carbon matrix with highly dispersed ultrafine Ru NPs is well designed and used as cathode catalysts in a Li–O_(2) battery,demonstrating a high discharge areal capacity of 6.82 mAh cm^(–2) at 0.02 mA cm^(–2),a high-rate capability of 4.93 mAh cm^(–2) at 0.2 mA cm^(–2),and stable discharge/charge cycling for up to 500 cycles(2000 h)with low overpotentials of~1.4 V.This fundamental understanding of the structure–performance relationship demonstrates a new and promising approach to optimize highly efficient cathode catalysts for solid-state Li–O_(2) batteries.

Multiple effects of polydopamine nanoparticles on Cu^(2+)-mediated Alzheimer's β-amyloid aggregation

Deposition of β-amyloid protein(Aβ) is the main hallmark of Alzheimer's disease(AD), and it has been well recognized that Cu^(2+)-mediated Aβ aggregation plays a crucial role in AD pathological processes.Cu^(2+)binding to Aβ can promote the production of reactive oxygen species(ROS) through Fenton-like reactions and produce more toxic Aβ-Cu^(2+)species under Cu^(2+)stimulation. Thus, the development of nanomaterials that can inhibit Cu^(2+)-mediated Aβ aggregation and degrade Aβ-Cu^(2+)complexes is considered an effective strategy for the prevention and treatment of AD. In this study, polydopamine nanoparticles(PDA NPs) were prepared and the results reveal that PDA NPs potently inhibit Cu^(2+)-mediated Aβaggregation and effectively reduce the formation of Aβ-Cu^(2+)complexes. In vitro experiments show that PDA NPs efficiently eliminate ROS generation catalyzed by Cu^(2+)or Aβ-Cu^(2+)complexes, thus rescuing cultured cells by reducing intracellular ROS levels. More importantly, PDA NPs can depolymerize Aβ-Cu^(2+)complexes, and the degradation of Aβ-Cu^(2+)complexes is promoted by near-infrared light irradiation due to their high photothermal conversion ability. In vivo studies reveal that PDA NPs significantly reduce the deposition of Aβ plaques in the presence of Cu^(2+)and extend the lifespan of AD nematodes from 11 to 14 d. Thus, the PDA NPs developed herein are multifunctional against Cu^(2+)-mediated Aβ aggregation for the potential prevention and treatment of AD.

mRNA transcriptome profiling of human hepatocellular carcinoma cells HepG2 treated with Catharanthus roseus-silver nanoparticles

BACKGROUND The demand for the development of cancer nanomedicine has increased due to its great therapeutic value that can overcome the limitations of conventional cancer therapy.However,the presence of various bioactive compounds in crude plant extracts used for the synthesis of silver nanoparticles(AgNPs)makes its precise mechanisms of action unclear.AIM To assessed the mRNA transcriptome profiling of human HepG2 cells exposed to Catharanthus roseus G.Don(C.roseus)-AgNPs.METHODS The proliferative activity of hepatocellular carcinoma(HepG2)and normal human liver(THLE3)cells treated with C.roseusAgNPs were measured using MTT assay.The RNA samples were extracted and sequenced using BGIseq500 platform.This is followed by data filtering,mapping,gene expression analysis,differentially expression genes analysis,Gene Ontology analysis,and pathway analysis.RESULTS The mean IC 50 values of C.roseusAgNPs on HepG2 was 4.38±1.59μg/mL while on THLE3 cells was 800±1.55μg/mL.Transcriptome profiling revealed an alteration of 296 genes.C.roseusAgNPs induced the expression of stress-associated genes such as MT,HSP and HMOX-1.Cellular signalling pathways were potentially activated through MAPK,TNF and TGF pathways that are responsible for apoptosis and cell cycle arrest.The alteration of ARF6,EHD2,FGFR3,RhoA,EEA1,VPS28,VPS25,and TSG101 indicated the uptake of C.roseus-AgNPs via both clathrin-dependent and clathrinindependent endocytosis.CONCLUSION This study provides new insights into gene expression study of biosynthesised AgNPs on cancer cells.The cytotoxicity effect is mediated by the aberrant gene alteration,and more interestingly the unique selective antiproliferative properties indicate the C.roseusAgNPs as an ideal anticancer candidate.

基于SiO_(2)纳米颗粒的无标记化学发光氯霉素适体传感器

经由食物链长期摄入氯霉素残留物会给人体带来各种危害和疾病。因此,建立快速、准确且高灵敏的食品中氯霉素检测方法具有重要意义。采用溶胶-凝胶法制备了表面氨基化的SiO_(2)纳米颗粒,并用X射线衍射、透射电镜和红外光谱对其进行了表征。然后,利用酰胺键和碱基互补配对作用在SiO_(2)纳米颗粒表面依次组装互补DNA链和氯霉素适配体,成功构建了无标记化学发光氯霉素适配体传感器。该传感器制备简便,其中的氯霉素适配体既可作为生物识别元件,又可与苯甲酰甲醛反应产生化学发光信号,无需标记信号分子。该传感器的氯霉素检出限为3.26×10^(-9) mol·L^(-1),且选择性较好。将该传感器应用于实际样品中进行加标,回收率在94.67%~103.00%之间,表明该适体传感器可用于食品中氯霉素的检测。

纳米α-Fe_(2)O_(3)/壳聚糖修饰玻碳电极的电化学行为研究

通过不同温度煅烧获得不同比表面积的α-Fe_(2)O_(3)纳米颗粒,将纳米α-Fe_(2)O_(3)与壳聚糖制成复合材料。利用滴涂法,将纳米α-Fe_(2)O_(3)/壳聚糖复合材料修饰在玻碳电极上,并通过循环伏安法研究纳米α-Fe_(2)O_(3)/壳聚糖/玻碳电极对铁氰化钾电化学性能的影响。结果表明:随着烧结温度从280℃提高到700℃时,α-Fe_(2)O_(3)纳米颗粒的比表面积由136.5m^(2)/g变为2.1m^(2)/g。纳米α-Fe_(2)O_(3)/壳聚糖/玻碳电极能显著提高铁氰化钾的电化学性能,与裸电极相比,氧化和还原电流均显著提高,其电化学催化性能与其纳米α-Fe_(2)O_(3)比表面积密切相关,比表面积越大峰电流就越强。在最佳实验条件下,浓度在510^(-4)~510^(-3)mol/L范围内,铁氰化钾的还原电流与浓度呈良好的线性关系,检出限为1.25×10^(-5)mol/L,该修饰电极重复性和稳定性较好。

Au@α-Fe_(2)O_(3)纳米棒的制备及光催化性能

本工作通过水热法与磁控溅射法结合成功构建了表面均匀沉积纳米Au粒子的α-Fe_(2)O_(3)(Au@α-Fe_(2)O_(3))纳米棒,纳米Au粒子的负载量和形态分别由磁控溅射时间和热处理温度调控。在沉积5.1%的纳米Au粒子后,因纳米Au的表面等离子体共振(SPR)效应,Au@α-Fe_(2)O_(3)纳米棒在550 nm处出现了一个新的吸收峰,其带隙由2.20 eV变窄至1.95 eV。Au@α-Fe_(2)O_(3)纳米棒的荧光强度和电化学阻抗显著降低,光电流从0.27μA·cm^(-2)增大至0.45μA·cm^(-2)。纳米Au粒子既拓宽了Au@α-Fe_(2)O_(3)纳米棒的可见光吸收性能,又抑制了电子-空穴对的复合。与α-Fe_(2)O_(3)纳米棒相比,Au@α-Fe_(2)O_(3)纳米棒的光催化性能变得更加稳定,Au@α-Fe_(2)O_(3)纳米棒的光催化效率提高约一倍。

两亲SiO_(2)纳米颗粒的制备和界面扩张流变行为研究

制备了一种两亲SiO_(2)纳米颗粒,借助红外光谱及接触角测量证实了相关基团在SiO_(2)纳米颗粒表面的成功接枝,探究了其界面活性和界面扩张流变行为。通过动态界面张力测量及小幅正弦振荡实验发现,两亲SiO_(2)纳米颗粒相比亲水和疏水SiO_(2)纳米颗粒能够更稳定地吸附在界面形成一层吸附膜,降低界面张力,同时由于其扩散交换速度较慢,界面扩张模量大于亲水和疏水SiO_(2)纳米颗粒。进一步的大幅线性压缩实验发现两亲SiO_(2)纳米颗粒在表面比为0.35时其界面吸附量会发生激增,扩张模量迅速增大,其形成的界面膜具有抵抗较大程度形变的能力。

MIL-101(Cr)-NH_(2)负载Ag催化4-硝基苯酚加氢研究

通过水热法制备出MIL-101(Cr)-NH_(2),以MIL-101(Cr)-NH_(2)为载体采用浸渍还原法得到Ag/MIL-101(Cr)-NH_(2)催化剂。通过XRD、N_(2)-吸附脱附曲线和TEM手段对催化剂进行表征。研究了Ag/MIL-101(Cr)-NH_(2)催化4-硝基苯酚(4-NP)加氢生成4-氨基苯酚(4-AP)的性能。结果表明,3wt%Ag/MIL-101(Cr)-NH_(2)样品的催化加氢性能高于其它样品,仅用4 min可将4-NP催化加氢全部转化为4-AP。因此Ag/MIL-101(Cr)-NH_(2)催化剂具有较好的催化4-NP加氢性能。