The Central Sichuan Block(CSB) is the hardest block between the deep faults of Pujiang-Bazhong and Huaying Mountain in the central part of Sichuan Basin, which lies in the northwestern part of the upper Yangtze Craton...The Central Sichuan Block(CSB) is the hardest block between the deep faults of Pujiang-Bazhong and Huaying Mountain in the central part of Sichuan Basin, which lies in the northwestern part of the upper Yangtze Craton. The CSB has long been considered as the oldest and most stable core area of Yangtze Craton, with the uniform basement and high level of hardening. Here we present a detailed interpretation of deep structures in the CSB by integrating high-resolution seismic data(approx. 50000 km2) with large-scale aeromagnetic data. Results show that eight Neoproterozoic extensional structures of different scales are nearly EW-, NEE-, and NW-trending in the CSB. Discovery of these extensional structures changes previous understanding of the CSB as a unified block. The extensional structures experienced one or two stages of extension in the longitudinal section, and filled with 3000–5000-m-thick weakly magnetic materials. Development of basal A-type granite in Weiyuan, Sichuan Basin and bimodal volcanic rocks of the Suxiong Formation, Western Sichuan confirms the CSB's Neoproterozoic extensional tectonic setting. The newly discovered Neoproterozoic extensional structures are of great significance for source rock and favorable sedimentary facies distribution, reservoir development, and gas accumulation.展开更多
Based on P- and S-wave amplitudes and some clear initial P-wave motion data, we calculated focal mechanism solutions of 928 M≥2.5 earthquakes （1994-2005） in four sub-blocks of Sichuan and Yunnan Provinces, namely S...Based on P- and S-wave amplitudes and some clear initial P-wave motion data, we calculated focal mechanism solutions of 928 M≥2.5 earthquakes （1994-2005） in four sub-blocks of Sichuan and Yunnan Provinces, namely Sichuan-Qinghai, Yajiang, Central Sichuan and Central Yunnan blocks. Combining these calculation results with those of the focal mechanism solutions of moderately strong earthquakes, we analyzed the stress field characteristics and dislocation types of seismogenic faults that are distributed in the four sub-blocks. The orientation of principal compressive stress for each block is： EW in Sichuan-Qinghai, ESE or SE in Yajiang, Central Sichuan and Central Yunnan blocks. Based on a great deal of focal mechanism data, we designed a program and calculated the directions of the principal stress tensors, σ1, σ2 and σ3, for the four blocks. Meanwhile, we estimated the difference （also referred to as consistency parameter θ^- ） between the force axis direction of focal mechanism solution and the direction of the mean stress tensor of each block. Then we further analyzed the variation of θ^- versus time and the dislocation types of seismogenic faults. Through determination of focal mechanism solutions for each block, we present information on the variation in θ^- value and dislocation types of seismogenic faults.展开更多
Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub...Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub-block （CYSB） and eastern part of CYSB. The characteristics of the mean stress fields in these three regions are obtained by fitting to CMT solutions. The stress state in NWSSB is characterized by its sub-horizontal tensile principal axis of stress （T axis） in roughly N-S direction and west dipping compressive principal axis of stress （P axis）; the one in western part of CYSB is characterized by its ENE dipping T axis and sub-horizontal medium principal axis of stress （B axis） in roughly N-S direction; the one in eastern part of CYSB is characterized by its sub-horizontal P axis in roughly NNW-SSE direction and sub-horizontal T axis in roughly WSW-ENE direction. Finite element method simulation clearly shows that the Indian Plate imposes great extrusion on Sichuan-Yunnan rhombic block （SYRB） near Assam massif. The value of the simulated compressive principal stress decreases with the distance from Assam massif. The simulated directions of the T axes in SYRB form annular distribution encir cling Assam. For a homogeneous elastic medium with free boundary conditions on the top and bottom surfaces as well as the displacement boundary conditions derived from the GPS observations on the lateral boundaries, the computation results are consistent with the Harvard CMT solutions in NWSSB and western part of CYSB, while inconsistent with the Harvard CMT solutions in eastern part of CYSB. The inconsistency in eastern part of CYSB can be reduced when it includes inhomogeneous elastic media. The stress states in NWSSB and western part of CYSB revealed by the Harvard CMT solutions are not local, which are mainly controlled by the boundary force on the whole region. On the other hand, the stress state in eastern part of CYSB given by the Harvard CMT solutions is local, which may be affected by local topography, material inhomogeneity, and the drag force underneath.展开更多
Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 201...Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block,namely from southern Dawu to the Qiaojia segment.The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault,the Anninghe fault zone,the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe,Anninghe,and Daliangshan presents a complex interaction among faults near the multiple faults intersection region,Shimian,where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20 km,which is consistent with the region of the plastic rheology between 14km-19 km calculated by Zhu Ailan et al.,( 2005).展开更多
In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have b...In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have been studied. The main results are: a) Strong earthquakes in Sichuan-Yunnan area distribute mainly in Sichuan-Yunnan and Sichuan-Qinghai crustal blocks; b) Most of strong earthquakes of the two blocks distribute mainly along their boundary faults; c) A few strong earthquakes are not obviously related to active faults. It shows that the relation between strong earthquakes and geological tectonics can be very complex; d) There is a certain correlativity for seismic activities among boundary faults of the two blocks, but they have different features; e) There are some anomalous changes of velocity structures in the deep crust of boundary faults of the two blocks. Many boundary faults, especially Longmenshan fault, cut obviously the Moho discontinuity. The Xianshuihe fault, a typical strike-slip fault, has no obvious indication of cutting the Moho discontinuity, but has distinct low-velocity zone in different depths.展开更多
In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have b...In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have been studied. The main results are: a) Strong earthquakes in Sichuan-Yunnan area distribute mainly in Sichuan-Yunnan and Sichuan-Qinghai crustal blocks; b) Most of strong earthquakes of the two blocks distribute mainly along their boundary faults; c) A few strong earthquakes are not obviously related to active faults. It shows that the relation between strong earthquakes and geological tectonics can be very complex; d) There is a certain correlativity for seismic activities among boundary faults of the two blocks, but they have different features; e) There are some anomalous changes of velocity structures in the deep crust of boundary faults of the two blocks. Many boundary faults, especially Longmenshan fault, cut obviously the Moho discontinuity. The Xianshuihe fault, a typical strike-slip fault, has no obvious indication of cutting the Moho discontinuity, but has distinct low-velocity zone in different depths.展开更多
基金supported by the National Oil&Gas Major Project of China(Grant No.2011ZX05004)the CNPC Science&Technology Project(Grant No.111702kt00900046)
文摘The Central Sichuan Block(CSB) is the hardest block between the deep faults of Pujiang-Bazhong and Huaying Mountain in the central part of Sichuan Basin, which lies in the northwestern part of the upper Yangtze Craton. The CSB has long been considered as the oldest and most stable core area of Yangtze Craton, with the uniform basement and high level of hardening. Here we present a detailed interpretation of deep structures in the CSB by integrating high-resolution seismic data(approx. 50000 km2) with large-scale aeromagnetic data. Results show that eight Neoproterozoic extensional structures of different scales are nearly EW-, NEE-, and NW-trending in the CSB. Discovery of these extensional structures changes previous understanding of the CSB as a unified block. The extensional structures experienced one or two stages of extension in the longitudinal section, and filled with 3000–5000-m-thick weakly magnetic materials. Development of basal A-type granite in Weiyuan, Sichuan Basin and bimodal volcanic rocks of the Suxiong Formation, Western Sichuan confirms the CSB's Neoproterozoic extensional tectonic setting. The newly discovered Neoproterozoic extensional structures are of great significance for source rock and favorable sedimentary facies distribution, reservoir development, and gas accumulation.
基金National Key Basic Research Development and Programming Project (2004CB418404) and Joint Seismological Science Foundation (105004).
文摘Based on P- and S-wave amplitudes and some clear initial P-wave motion data, we calculated focal mechanism solutions of 928 M≥2.5 earthquakes （1994-2005） in four sub-blocks of Sichuan and Yunnan Provinces, namely Sichuan-Qinghai, Yajiang, Central Sichuan and Central Yunnan blocks. Combining these calculation results with those of the focal mechanism solutions of moderately strong earthquakes, we analyzed the stress field characteristics and dislocation types of seismogenic faults that are distributed in the four sub-blocks. The orientation of principal compressive stress for each block is： EW in Sichuan-Qinghai, ESE or SE in Yajiang, Central Sichuan and Central Yunnan blocks. Based on a great deal of focal mechanism data, we designed a program and calculated the directions of the principal stress tensors, σ1, σ2 and σ3, for the four blocks. Meanwhile, we estimated the difference （also referred to as consistency parameter θ^- ） between the force axis direction of focal mechanism solution and the direction of the mean stress tensor of each block. Then we further analyzed the variation of θ^- versus time and the dislocation types of seismogenic faults. Through determination of focal mechanism solutions for each block, we present information on the variation in θ^- value and dislocation types of seismogenic faults.
基金Foundation item: State Key Basic research and Development Project from Ministry of Science and Technology of China (2004cb418406)National Natural Science Foundation of China (40521002).
文摘Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub-block （CYSB） and eastern part of CYSB. The characteristics of the mean stress fields in these three regions are obtained by fitting to CMT solutions. The stress state in NWSSB is characterized by its sub-horizontal tensile principal axis of stress （T axis） in roughly N-S direction and west dipping compressive principal axis of stress （P axis）; the one in western part of CYSB is characterized by its ENE dipping T axis and sub-horizontal medium principal axis of stress （B axis） in roughly N-S direction; the one in eastern part of CYSB is characterized by its sub-horizontal P axis in roughly NNW-SSE direction and sub-horizontal T axis in roughly WSW-ENE direction. Finite element method simulation clearly shows that the Indian Plate imposes great extrusion on Sichuan-Yunnan rhombic block （SYRB） near Assam massif. The value of the simulated compressive principal stress decreases with the distance from Assam massif. The simulated directions of the T axes in SYRB form annular distribution encir cling Assam. For a homogeneous elastic medium with free boundary conditions on the top and bottom surfaces as well as the displacement boundary conditions derived from the GPS observations on the lateral boundaries, the computation results are consistent with the Harvard CMT solutions in NWSSB and western part of CYSB, while inconsistent with the Harvard CMT solutions in eastern part of CYSB. The inconsistency in eastern part of CYSB can be reduced when it includes inhomogeneous elastic media. The stress states in NWSSB and western part of CYSB revealed by the Harvard CMT solutions are not local, which are mainly controlled by the boundary force on the whole region. On the other hand, the stress state in eastern part of CYSB given by the Harvard CMT solutions is local, which may be affected by local topography, material inhomogeneity, and the drag force underneath.
基金funded by Study on the Optimal Time Window of Single Azimuth Angle,the Three-in-one Project of Earthquake Monitoring,Prediction and Scientific Research of China Earthquake Administration(CEA-JC/3JH-162305)the Special Training Project for Youth Talents for Seismic Network,China Earthquake Administration(20150422)
文摘Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block,namely from southern Dawu to the Qiaojia segment.The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault,the Anninghe fault zone,the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe,Anninghe,and Daliangshan presents a complex interaction among faults near the multiple faults intersection region,Shimian,where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20 km,which is consistent with the region of the plastic rheology between 14km-19 km calculated by Zhu Ailan et al.,( 2005).
基金State Key Basic Research Development and Programming Project of China (G1998040700/95-13-02-03).
文摘In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have been studied. The main results are: a) Strong earthquakes in Sichuan-Yunnan area distribute mainly in Sichuan-Yunnan and Sichuan-Qinghai crustal blocks; b) Most of strong earthquakes of the two blocks distribute mainly along their boundary faults; c) A few strong earthquakes are not obviously related to active faults. It shows that the relation between strong earthquakes and geological tectonics can be very complex; d) There is a certain correlativity for seismic activities among boundary faults of the two blocks, but they have different features; e) There are some anomalous changes of velocity structures in the deep crust of boundary faults of the two blocks. Many boundary faults, especially Longmenshan fault, cut obviously the Moho discontinuity. The Xianshuihe fault, a typical strike-slip fault, has no obvious indication of cutting the Moho discontinuity, but has distinct low-velocity zone in different depths.
文摘In the paper, the distribution characteristics of strong earthquakes in Sichuan-Yunnan area and their geological tectonic background, especially the relation to Sichuan-Yunnan and Sichuan-Qinghai crustal blocks have been studied. The main results are: a) Strong earthquakes in Sichuan-Yunnan area distribute mainly in Sichuan-Yunnan and Sichuan-Qinghai crustal blocks; b) Most of strong earthquakes of the two blocks distribute mainly along their boundary faults; c) A few strong earthquakes are not obviously related to active faults. It shows that the relation between strong earthquakes and geological tectonics can be very complex; d) There is a certain correlativity for seismic activities among boundary faults of the two blocks, but they have different features; e) There are some anomalous changes of velocity structures in the deep crust of boundary faults of the two blocks. Many boundary faults, especially Longmenshan fault, cut obviously the Moho discontinuity. The Xianshuihe fault, a typical strike-slip fault, has no obvious indication of cutting the Moho discontinuity, but has distinct low-velocity zone in different depths.
