侧面柱碰撞工况下Farside气囊对主驾WorldSID 50th假人损伤研究

在2023版Euro NCAP侧面柱碰撞试验中主驾和副驾均放置WorldSID 50th假人,为了研究Farside气囊对该工况下主驾假人的保护效果,选取某款车型分别在两种工况下进行实车碰撞试验,对驾驶员假人头部加速度、颈部力、右侧肩部力、右侧股骨力、右侧骶髂力等进行对比分析。

Development of a Side Door Composite Impact Beam for the Automotive Industry

The automobile industry has been searching for vehicles that use less energy and emit fewer pollutants, which has resulted in a high demand for fuel-efficient vehicles. Because of their higher strength-to-weight ratio compared to traditional steel, using fiber-reinforcement composite materials in automobile bodies has emerged as the most effective strategy for improving fuel efficiency while maintaining safety standards. This research paper examined the utilization of fiber-reinforced composite materials in car bodies to meet the increasing consumer demand for fuel-efficient and eco-friendly vehicles. It particularly focused on a carbon-aramid fiber-reinforced composite impact beam for passenger car side door impact protection. Despite the encouraging prospects of the carbon-aramid fiber-reinforced beam, the research uncovered substantial defects in the fabrication process, resulting in diminished load-bearing capacity and energy absorption. As a result, the beam was un-successful in three-point bending tests. This was accomplished by using an I cross-section design with varying thickness because of the higher area moment of inertia. Vacuum-assisted resin transfer molding (VARTM) manufacturing process was used and the finished beam underwent to three-point bending tests.

Side-Channel Attacks & Data Exfiltration Using Wall Outlet USB Power Adapters

The number and creativity of side channel attacks have increased dramatically in recent years. Of particular interest are attacks leveraging power line communication to 1) gather information on power consumption from the victim and 2) exfiltrate data from compromised machines. Attack strategies of this nature on the greater power grid and building infrastructure levels have been shown to be a serious threat. This project further explores this concept of a novel attack vector by creating a new type of penetration testing tool: an USB power adapter capable of remote monitoring of device power consumption and communicating through powerline communications.

Control mechanism and technique of floor heave with reinforcing solid coal side and floor corner in gob-side coal entry retaining

Floor heave is the most common convergence in gob-side entry retaining.The paper analyzes the form,process and characteristics of gob-side entry retaining with the comprehensive methods of theoretical analysis,numerical simulation and the field trial.Research results present that bending and folding floor heave is the main factor in the stage of the first panel mining;squeezing and fluidity floor heave plays a great role in the stable stage of gob-side entry retaining;the combination of the former two factors affects mainly the stage of the second mining ahead;abutment pressure is a fundamental contribution to the serious floor heave of gob-side entry retaining,and sides corners of solid coal body are key part in the case of floor heave controlling of gob-side entry retaining.Floor heave of gob-side entry retaining can be significantly controlled by reinforcing sides and corners of solid coal body,and influence rules on the floor heave of gob side entry retaining of sides supporting strength and the bottom bolt orientation in solid coal side are obtained.Research results have been successfully applied in gob-side entry retaining of G20-F23070 face haulage roadway in #2 coal mine of Pingmei Group,and the field observation shows that the proposed technique is an effective way in controlling the floor heave of gob-side entry retaining.

Side-Tee混合器内微观混合行为研究

选用碘化物-碘酸盐体系，利用化学探针法对Side-Tee混合器在较高雷诺数下微观混合效率进行了研究。考察了不同影响参数（如雷诺数、体积流率比、反应物浓度、粘度、管径）对Side-Tee混合器微观混合性能的影响，并用离集指数来表征其微观混合特性。结果表明，雷诺数大于12000后碘化物-碘酸盐反应体系对混合器内微观混合状况不敏感。基于团聚模型，估算出Side-Tee混合器在实验条件下的微观混合时间为3×10^-5～3×10^-4s。表明这一型式的反应器对于快速反应尤其是纳米材料制备过程具有替代传统搅拌槽反应器的优势。

ITER Side校正场线圈端部大圆弧模压成形及回弹分析

利用大型有限元分析软件ANSYS分析了国际热核实验反应堆(ITER)Side校正场线圈(CC)端部三维大圆弧模压成形及释放模具后导体的回弹效应,研究了不同半径成形时导体内外表面的应力、应变的分布及释放模具后导体的回弹规律。设计了1套模压成形模具,通过修模的方式在该套成形模具上进行了不同半径成形试验,测得了不同成形半径时模压成形后的回弹量值。试验结果验证了所建立的有限元分析模型的正确性。有限元分析和试验结果表明:ITERSideCC端部三维大圆弧可通过模压成形达到所需的大半径要求,为ITER Side CC端部三维大圆弧成形提供了一种可行方案。

校园足球教学与训练方法--基于国外足球Small-Sided Games的解读

教学与训练方法的落后已经成为我国校园足球高质量发展和高效率普及的瓶颈。基于丰富我国足球教学与训练方法,提高校园足球普及质量与效率的现实需要,对国外足球小场训练赛(SSGs)的概念、特点、理论基础、训练效果影响因素及实践操作过程等进行解读。以期增进广大中小学足球专项教师和教练对该方法的理解和掌握,同时,引导和提高他们对该方法的科学使用。

Surrounding rock control of gob-side entry driving with narrow coal pillar and roadway side sealing technology in Yangliu Coal Mine

Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation characteristics of gob-side entry driving with narrow coal pillar is analysed, reasonable size of coal pillar and reasonable roadway excavation time after mining are achieved. Surrounding rock control technology and effective roadway side sealing technology are proposed and are taken into field practice. The results showed that a safer and more efficient mining of working face can be achieved. In addition, results of this paper also have important theoretical significance and valuable reference for surrounding rock control technology of gob-side entry driving with narrow coal pillar under special geological condition.

Right-and left-sided colorectal cancers respond differently to traditional Chinese medicine

AIM To explore the differences in the responses of left-sided colorectal cancer(LSCRC) and right-sided colon cancer(RSCC) to traditional Chinese medicine(TCM).METHODS Patients with postoperative stage I-III colorectal cancer(CRC) were enrolled and divided into the LSCRC with or without TCM and RSCC with or without TCM groups depending on the primary tumor side and TCM administration. Patients in the TCM group were given TCM for at least 6 mo. Our research adopted diseasefree survival(DFS) as the primary endpoint. We applied a Cox proportional hazards regression model for the multivariate factor analysis using Stata 12.0 and SPSS 22.0 software for data analysis.RESULTS Of the 817 patients included in our study, 617 had LSCRC(TCM group, n = 404; Non-TCM group, n = 213), and 200 had RSCC(TCM group, n = 132; NonTCM group, n = 68). The 6-year DFS for patients with LSCRC was 56.95% in the TCM group and 41.50% in the Non-TCM group(P = 0.000). For patients with RSCC, the 6-year DFS was 52.92% in the TCM group and 37.19% in the Non-TCM group(P = 0.003). Differences between LSCRC and RSCC were not statistically significant regardless of TCM ingestion.CONCLUSION Patients with either LSCRC or RSCC and who took TCM experienced longer DFS; furthermore, patients with RSCC benefited more from TCM in DFS.

The reasons for end-to-side coaptation:how does lateral axon sprouting work?

Nerve fibers are attracted by sutureless end-to-side nerve coaptation into the recipient nerve. Opening a window in the epineurium enhances axon attraction and myeliuation. The authors analyze the features of nerve repair by end-to-side coaptation. They highlight the known mechanisms of axon sprouting and different hypotheses of start up signals （presence or absence of an epineurial window, role of Schwann cells, signaling from the distal trunk）. The clinical literature is also presented and differences between experimental and clinical applications are pointed out. The authors propose their point of view and perspectives deriving from recent experimental and clinical experiences.

Meta-sided exchange环及其扩张

讨论了meta-sided exchange环的性质。证明了如果R是Abelian meta-sided exchange环,则对R的任意素理想P,都有R/P是局部环;如果R是Abelian环,(S,≤)是严格序幺半群且对任意s∈S,都有0≤s,则广义幂级数环[[RS,≤]]是meta-sided exchange环当且仅当R是meta-si-ded exchange环。

立方体包装件混装集装离散优化(二)——UpSideUp箱型的集装

:提出了 Up Side Up箱型混装集装优化的一种方法 ,编制了软件 。

Numerical simulation of dynamic thermal process during doublesided asymmetrical TIG backing welding of large thick plates

The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the thermal cycle in weld zone during double-sided asymmetrical T1G backing welding is investigated. The results show that the workpiece experiences double-peak thermal cycle in double-sided asymmetrical TIG backing welding. On the one hand, the fore arc has the pre- heating effect on the rear pass, and the pre-heating temperature depends on the distance between the double arcs, the heat input of fore arc, and the initial temperature of workpiece. On the other hand, the rear arc has the post-heating effect on the fore pass. The mutual effects of two heat sources decrease with the increase of arc distance.

CORROSION BEHAVIORS OF THE EXPOSED SIDE AND UNDERSIDE OF LOW ALLOY WEATHERING STEEL IN QINGDAO AND WANNING FOR 18 MONTHS

For 18 months, a newly developed low alloy weathering steel has been exposed in two coastal sites （Qingdao in the north China, Wanning in the south China）. The different corrosion behaviors of the exposed side and the underside of the samples were characterized by X-ray diffraetion （XRD）, polarization curve, electrochemical impedance spectroscopy （EIS）, scanning electron microscopy （SEM）, and N2 adsorption approach. It was found that the samples exhibited higher corrosion rate in Wanning than that in Qingdao. The underside of the samples corrodes more seriously than the exposed side in Qingdao, whereas the result in Wanning is just the reverse. The protection performance of rust layers mainly depends on its compactness and the enrichment of Cu and Cr is a secondary causation. The different compactness of rust layers in the exposed side and the underside originates from different corrosion conditions of the two sides.

UTILITY ANALYSIS AND EVALUATION METHOD STUDY OF SIDE CHANNEL INFORMATION

In order to improve the efficiency and success rate of the side channel attack,the utility of side channel information of the attack object must be analyzed and evaluated before the attack implementation.Based on the study of side-channel attack techniques,a method is proposed in this paper to analyze and evaluate the utility of side channel information and the evaluation indexes of comentropy,Signal-to-Noise Ratio(SNR)are introduced.On this basis,the side channel information(power and electromagnetic)of a side channel attack experiment board is analyzed and evaluated,and the Data Encryption Standard(DES)cipher algorithm is attacked with the differential power attack method and differential electromagnetic attack method.The attack results show the effectiveness of the analysis and evaluation method proposed in this paper.

Features of Runoff and Sediment Yield of Different Shrub-Grass Combination Modes for Highway Side Slope in Hilly Areas of Central Sichuan Province

[Objective] Indigenous plants with favorable water and soil conservation effects were screened for the shrub planting.[Method] Suining-Ziyang-Meishan Highway in the hilly areas of central Sichuan Province was taken for example,through sorting out plant species investigated in the route planning,3 indigenous shrub species(Neosinocalamus affinis,Vitex negundo and Coriaria nepalensis) and 3 indigenous herbaceous species(Setaria viridis,Miscanthus floridulus,Artemisia argyi) were selected.Rainfall simulation experiment was adopted to compare runoff and sediment yields of different combination modes and ratios under constant rainfall intensity(20 mm/min).[Result] Different combination modes under constant rainfall intensity all showed better water and soil conservation effects than that of control group did.For example,runoff appeared 1'-4'05"later,sediment yield reduced by 6.56-33.86 g respectively.Among all combination modes,runoff and sediment yield showed great difference after 20 min of constant rainfall,V.negundo+S.viridis had the lowest runoff(1,700 ml) and sediment yield(60.71 g);C nepalensis+A. argyi had the highest runoff(1,920 ml) and sediment yield(84.02 g).[Conclusion] Given the same planting conditions such as side slope and seeding quantity,and also the same planting techniques,in the hilly areas of central Sichuan Province,the combination of V.negundo and S.viridis can greatly improve the water and soil conservation capacity of highway.

关于Meta-sided Exchange环的几点注记

给出了meta-sided exchange环的性质;讨论了Morita系统环的meta-sided exchange性质和具有零化条件的meta-sided exchange环;证明了满足一定条件的meta-sided exchange环是环.

Left hepatic trisectionectomy for perihilar cholangiocarcinoma with a right-sided round ligament:A case report

BACKGROUND A right-sided round ligament(RSRL)is a rare,congenital anomaly of the intrahepatic portal vein,with a reported frequency of 0.2%-1.2%.For patients with perihilar cholangiocarcinoma associated with an RSRL,an accurate understanding of the vascular and biliary anatomy is indispensable.CASE SUMMARY We report a 70-year-old male with perihilar cholangiocarcinoma associated with an RSRL.After percutaneous transhepatic embolization of the left and anterior portal branches,we conducted a left trisectionectomy of the liver with extrahepatic bile duct resection and hepaticojejunostomy.The postoperative course was uneventful,and R0 resection was achieved.When the liver volume of each section was compared between 7 patients with an RSRL and 20 patients with normal portal vein anatomy,the posterior section in RSRL patients was significantly larger than that in patients with normal portal vein anatomy(median:457 mL vs 306 mL,P=0.031).In patients with perihilar cholangiocarcinoma associated with an RSRL,left trisectionectomy has several surgical advantages:(1)The posterior branch of the portal vein often ramifies independently,and the division of the portal vein is easily conducted;(2)A relatively large amount of remnant liver can be retained;and(3)The anatomy of the posterior branch of the Glissonian pedicle is similar to that in patients with normal anatomy.CONCLUSION In patients with an RSRL and perihilar cholangiocarcinoma that does not involve the posterior section,left trisectionectomy may be a favorable choice.

Application of Hot Forming High Strength Steel Parts on Car Body in Side Impact

Lightweight structure is an important method to increase vehicle fuel efficiency. High strength steel is applied for replacing mild steel in automotive structures to decrease thickness of parts for lightweight. However, the lightweight structures must show the improved capability for structural rigidity and crash energy absorption. Advanced high strength steels are attractive materials to achieve higher strength for energy absorption and reduce weight of vehicles. Currently, many research works focus on component level axial crash testing and simulation of high strength steels. However, the effects of high strength steel parts to the impact of auto body are not considered. The goal of this research is to study the application of hot forming high strength steel（HFHSS） in order to evaluate the potential using in vehicle design for lightweight and passive safety. The performance of HFHSS is investigated by using both experimental and analytical techniques. In particular, the focus is on HFHSS which may have potential to enhance the passive safety for lightweight auto body. Automotive components made of HFHSS and general high strength steel（GHSS） are considered in this study. The material characterization of HFHSS is carried out through material experiments. The finite element method, in conjunction with the validated model is used to simulate the side impact of a car with GHSS and HFHSS parts according to China New Car Assessment Programme（C-NCAP） crash test. The deformation and acceleration characteristics of car body are analyzed and the injuries of an occupant are calculated. The results from the simulation analyses of HFHSS are compared with those of GHSS. The comparison indicates that the HFHSS parts on car body enhance the passive safety for the lightweight car body in side impact. Parts of HFHSS reduce weight of vehicle through thinner thickness offering higher strength of parts. Passive safety of lightweight car body is improved through reduction of crash deformation on car body by the application of HFHSS parts. The experiments and simulation are conducted to the HFHSS parts on auto body. The results demonstrate the feasibility of the application of HFHSS materials on automotive components for improved capability of passive safety and lightweight.

Effect of low-dose amitriptyline on globus pharyngeus and its side effects

AIM:To compare the efficacy and side effects of lowdose amitriptyline(AMT)with proton pump inhibitor treatment in patients with globus pharyngeus.METHODS:Thirty-four patients who fulfilled the RomeⅢcriteria for functional esophageal disorders were included in this study.Patients were randomly assigned to receive either 25 mg AMT before bedtime(AMT group)or 40 mg Pantoprazole once daily for 4 wk(conventional group).The main efficacy endpoint was assessed using the Glasgow Edinburgh Throat Scale(GETS).The secondary efficacy endpoints included the Medical Outcomes Study 36-item short form health survey[social functioning(SF)-36]and the Pittsburgh Sleep Quality Index.Treatment response was defined as a>50%reduction in GETS scores.All patients entering this study recorded side effects at days 1,8,15,22 and 29 using a visual analogue scale.RESULTS:Thirty patients completed the study.After 4 wk of treatment,the AMT group had a greater response than the conventional group(75%vs 35.7%,P=0.004).At day 3,the AMT group showed significantly more improvement than the Conventional group in GETS score(3.69±1.14 vs 5.64±1.28,P=0.000).After 4 wk of treatment,the AMT group showed significantly greater improvement in GETS score and sleep quality than the Conventional group(1.25±1.84 vs 3.79±2.33,4.19±2.07 vs 8.5±4.97;P<0.01 for both).Additionally,the AMT group was more likely than the Conventional group to experience improvement in the SF-36,including general health,vitality,social functioning and mental health(P=0.044,0.024,0.049 and 0.005).Dry mouth,sleepiness,dizziness and constipation were the most common side effects.CONCLUSION:Low-dose AMT is well tolerated and can significantly improve patient symptoms,sleep and quality of life.Thus,low-dose AMT may be an effective treatment for globus pharyngeus.