Weak signal detection method based on novel composite multistable stochastic resonance

The weak signal detection method based on stochastic resonance is usually used to extract and identify the weak characteristic signal submerged in strong noise by using the noise energy transfer mechanism.We propose a novel composite multistable stochastic-resonance(NCMSR)model combining the Gaussian potential model and an improved bistable model.Compared with the traditional multistable stochastic resonance method,all the parameters in the novel model have no symmetry,the output signal-to-noise ratio can be optimized and the output amplitude can be improved by adjusting the system parameters.The model retains the advantages of continuity and constraint of the Gaussian potential model and the advantages of the improved bistable model without output saturation,the NCMSR model has a higher utilization of noise.Taking the output signal-to-noise ratio as the index,weak periodic signal is detected based on the NCMSR model in Gaussian noise andαnoise environment respectively,and the detection effect is good.The application of NCMSR to the actual detection of bearing fault signals can realize the fault detection of bearing inner race and outer race.The outstanding advantages of this method in weak signal detection are verified,which provides a theoretical basis for industrial practical applications.

Signal Detection of Large Volume Airgun Source Excitation in the Fixed Field of the Yangtze River

As this is the first time a large volume airgun has been excited in the "Yangtse River Geoscience Project",it is necessary to study the time-frequency characteristic based on the linear stacked seismic data from records from portable stations near the fixed fields and seismic stations. Airgun signal propagation distances were detected using stacked seismic data to analyze the environmental impact on signal propagation distance. The results showed that:( 1) the airgun signal produced by bubble pulses,pressure pulses and the surface wave can be received by a portable station near the fixed field;( 2) the dominant frequency of a bubble at 5Hz or so can be received by both near-field stations and far-field stations,pressure pulses rapidly weaken and the dominant frequency bands get narrower as epicentral distance increases;( 3) the longest spread distance of signal is 260 km,the nearest is 180 km,and the signal can travel further in the evening.

Speech Signal Detection Based on Bayesian Estimation by Observing Air-Conducted Speech under Existence of Surrounding Noise with the Aid of Bone-Conducted Speech

In order to apply speech recognition systems to actual circumstances such as inspection and maintenance operations in industrial factories to recording and reporting routines at construction sites, etc. where hand-writing is difficult, some countermeasure methods for surrounding noise are indispensable. In this study, a signal detection method to remove the noise for actual speech signals is proposed by using Bayesian estimation with the aid of bone-conducted speech. More specifically, by introducing Bayes’ theorem based on the observation of air-conducted speech contaminated by surrounding background noise, a new type of algorithm for noise removal is theoretically derived. In the proposed speech detection method, bone-conducted speech is utilized in order to obtain precise estimation for speech signals. The effectiveness of the proposed method is experimentally confirmed by applying it to air- and bone-conducted speeches measured in real environment under the existence of surrounding background noise.

Wigner-Matrix-Based Normality Test and Application to Weak Signal Detection in SISO/SIMO Systems

Based on the asymptotic spectral distribution of Wigner matrices,a new normality test method is proposed via reforming the white noise sequence.In this work,the asymptotic cumulative distribution function(CDF)of eigenvalues of the Wigner matrix is deduced.A numerical Kullback-Leibler divergence of the empirical spectral CDF based on test samples from the deduced asymptotic CDF is established,which is treated as the test statistic.For validating the superiority of our proposed normality test,we apply the method to weak 8PSK signal detection in the single-input single-output(SISO) system and the single-input multiple-output(SIMO)system.By comparing with other common normality tests and the existing signal detection methods,simulation results show that the proposed method is superior and robust.

Research on LPI radar signal detection and parameter estimation technology

Modern radar signals mostly use low probability of intercept(LPI)waveforms,which have short pulses in the time domain,multicomponent properties,frequency hopping,combined modulation waveforms and other characteristics,making the detection and estimation of LPI radar signals extremely difficult,and leading to highly required significant research on perception technology in the battlefield environment.This paper proposes a visibility graphs(VG)-based multicomponent signals detection method and a modulation waveforms parameter estimation algorithm based on the time-frequency representation(TFR).On the one hand,the frequency domain VG is used to set the dynamic threshold for detecting the multicomponent LPI radar waveforms.On the other hand,the signal is projected into the time and frequency domains by the TFR method for estimating its symbol width and instantaneous frequency(IF).Simulation performance shows that,compared with the most advanced methods,the algorithm proposed in this paper has a valuable advantage.Meanwhile,the calculation cost of the algorithm is quite low,and it is achievable in the future battlefield.

A feedback control method for phase signal demodulation in fber-optic hydrophones

In the realm of acoustic signal detection,the identification of weak signals,particularly in the presence of negative signal-to-noise ratios,poses a significant challenge.This challenge is further heightened when signals are acquired through fiber-optic hydrophones,as these signals often lack physical significance and resist clear systematic modeling.Conventional processing methods,e.g.,low-pass filter(LPF),require a thorough understanding of the effective signal bandwidth for noise reduction,and may introduce undesirable time lags.This paper introduces an innovative feedback control method with dual Kalman filters for the demodulation of phase signals with noises in fiber-optic hydrophones.A mathematical model of the closed-loop system is established to guide the design of the feedback control,aiming to achieve a balance with the input phase signal.The dual Kalman filters are instrumental in mitigating the effects of signal noise,observation noise,and control execution noise,thereby enabling precise estimation for the input phase signals.The effectiveness of this feedback control method is demonstrated through examples,showcasing the restoration of low-noise signals,negative signal-to-noise ratio signals,and multi-frequency signals.This research contributes to the technical advancement of high-performance devices,including fiber-optic hydrophones and phase-locked amplifiers.

Deep Learning Based Signal Detector for OFDM Systems

In this paper,we propose a novel deep learning(DL)-based receiver design for orthogonal frequency division multiplexing(OFDM)systems.The entire process of channel estimation,equalization,and signal detection is replaced by a neural network(NN),and hence,the detector is called a NN detector(N^(2)D).First,an OFDM signal model is established.We analyze both temporal and spectral characteristics of OFDM signals,which are the motivation for DL.Then,the generated data based on the simulation of channel statistics is used for offline training of bi-directional long short-term memory(Bi-LSTM)NN.Especially,a discriminator(F)is added to the input of Bi-LSTM NN to look for subcarrier transmission data with optimal channel gain(OCG),which can greatly improve the performance of the detector.Finally,the trained N^(2)D is used for online recovery of OFDM symbols.The performance of the proposed N^(2)D is analyzed theoretically in terms of bit error rate(BER)by Monte Carlo simulation under different parameter scenarios.The simulation results demonstrate that the BER of N^(2)D is obviously lower than other algorithms,especially at high signal-to-noise ratios(SNRs).Meanwhile,the proposed N^(2)D is robust to the fluctuation of parameter values.

Study on the performance of data fusion system for sonar signal detection

The mathematical model and fusion algorithm for multisensor data fusion are presented, and applied to integrate the decisions obtained by multiple sonars in a distributed detection system. Assuming that all the sonars and the fusion system operate at the same false alarm probability, the expression for the detection probability of the fusion system is obtained. Computer simulations reveals that the detection probability and detection range of the fusion system are significantly improved compared to the original distributed detection system.

A new method for coseismic offset detection from GPS coordinate time series

Currently,the extraction of coseismic offset signals primarily relies on earthquake catalog data to determine the occurrence time of earthquakes.This is followed by the process of differencing the average GPS coordinate time series data,with a time interval of 3 to 5 days before and after the earthquake.In the face of the huge amount of GPS coordinate time series data today,the conventional approach of relying on earthquake catalog data to assist in obtaining coseismic offset signals has become increasingly burdensome.To address this problem,we propose a new method for automatically detecting coseismic offset signals in GPS coordinate time series without an extra earthquake catalog for reference.Firstly,we pre-process the GPS coordinate time series data for filtering out stations with significant observations missing and detecting and removing outliers.Secondly,we eliminate other signals and errors in the GPS coordinate time series,such as trend and seasonal signals,leaving the coseismic offset signals as the primary signal.The resulting coordinate time series is then modeled using the first-order difference and data stacking method.The modeling method enables automatic detection of the coseismic offset signals in the GPS coordinate time series.The aforementioned method is applied to automatically detect coseismic offset signals using simulated data and the Searles Valley GPS data in California,USA.The results demonstrate the efficacy of our proposed method,successfully detecting coseismic offsets from vast amounts of GPS coordinate time series data.

A tunable adaptive detector for distributed targets when signal mismatch occurs

Aiming at the problem of detecting a distributed target when signal mismatch occurs,this paper proposes a tunable detector parameterized by an adjustable parameter.By adjusting the parameter,the tunable detector can achieve robust or selective detection of mismatched signals.Moreover,the proposed tunable detector,with a proper tunable parameter,can provide higher detection probability compared with existing detectors in the case of no signal mismatch.In addition,the proposed tunable detector possesses the constant false alarm rate property with the unknown noise covariance matrix.

A Novel Rolling Bearing Vibration Impulsive Signals Detection Approach Based on Dictionary Learning

The localized faults of rolling bearings can be diagnosed by its vibration impulsive signals.However,it is always a challenge to extract the impulsive feature under background noise and non-stationary conditions.This paper investigates impulsive signals detection of a single-point defect rolling bearing and presents a novel data-driven detection approach based on dictionary learning.To overcome the effects harmonic and noise components,we propose an autoregressive-minimum entropy deconvolution model to separate harmonic and deconvolve the effect of the transmission path.To address the shortcomings of conventional sparse representation under the changeable operation environment,we propose an approach that combines K-clustering with singular value decomposition(K-SVD)and split-Bregman to extract impulsive components precisely.Via experiments on synthetic signals and real run-to-failure signals,the excellent performance for different impulsive signals detection verifies the effectiveness and robustness of the proposed approach.Meanwhile,a comparison with the state-of-the-art methods is illustrated,which shows that the proposed approach can provide more accurate detected impulsive signals.

A proposal for detecting weak electromagnetic waves around 2.6μm wavelength with Sr optical clock

Infrared signal detection is widely used in many fields.Due to the detection principle,however,the accuracy and range of detection are limited.Thanks to the ultra stability of the^(87)Sr optical lattice clock,external infrared electromagnetic wave disturbances can be responded to.Utilizing the ac Stark shift of the clock transition,we propose a new method to detect infrared signals.According to our calculations,the theoretical detection accuracy in the vicinity of its resonance band of 2.6μm can reach the order of 10-14W,while the minimum detectable signal of common detectors is on the order of 10^(-10)W.

Uplink NOMA signal transmission with convolutional neural networks approach

Non-orthogonal multiple access(NOMA), featuring high spectrum efficiency, massive connectivity and low latency, holds immense potential to be a novel multi-access technique in fifth-generation(5G) communication. Successive interference cancellation(SIC) is proved to be an effective method to detect the NOMA signal by ordering the power of received signals and then decoding them. However, the error accumulation effect referred to as error propagation is an inevitable problem. In this paper,we propose a convolutional neural networks(CNNs) approach to restore the desired signal impaired by the multiple input multiple output(MIMO) channel. Especially in the uplink NOMA scenario,the proposed method can decode multiple users' information in a cluster instantaneously without any traditional communication signal processing steps. Simulation experiments are conducted in the Rayleigh channel and the results demonstrate that the error performance of the proposed learning system outperforms that of the classic SIC detection. Consequently, deep learning has disruptive potential to replace the conventional signal detection method.

Monte Carlo Simulation Study of Hot-Particle Detection in Voluminous Samples by Gamma Spectrometry

In this work, we addressed the inhomogeneity problem in gamma spectrometry caused by hot particles, which are dispersed into environment from large nuclear reactor accidents such as at Chernobyl and Fukushima. Using Monte Carlo simulation, we have determined the response of a gamma spectrometer to individual and grouped hot particles randomly distributed in a soil matrix of 1-L and 0.6-L sample containers. By exploring the fact that the peak-to-total ratio of efficiencies in gamma spectrometry is an empirical parameter, we derived and verified a power-law relationship between the peak efficiency and peak-to-total ratio. This enabled creation of a novel calibration model which was demonstrated to reduce the bias range and bias standard deviation, caused by measuring hot particles, by several times, as compared with the homogeneous calibration. The new model is independent of the number, location, and distribution of hot particles in the samples. In this work, we demonstrated successful performance of the model for a single-peak 137Cs radionuclide. An extension to multi-peak radionuclide was also derived.

A sign-function receiving scheme for sine signals enhanced by stochastic resonance

To address the problem that it is difficult to detect an intermediate frequency(IF)signal at the receiving end of a communication system under extremely low signal-to-noise ratio(SNR)conditions,we propose a stochastic resonance(SR)-enhanced sine-signal detection method based on the sign function.By analyzing the SR mechanism of the sine signal and combining it with the characteristics of a dual-sequence frequency-hopping(DSFH)receiver,a periodic stationary solution of the Fokker-Planck equation(FPE)with a time parameter is obtained.The extreme point of the sine signal is selected as the decision time,and the force law of the electromagnetic particles is analyzed.A receiving structure based on the sign function is proposed to maximize the output difference of the system,and the value condition of the sign function is determined.In order to further improve the detection performance,in combination with the central-limit theorem,the sampling points are averaged N times,and the signal-detection problem is transformed into a hypothesis-testing problem under a Gaussian distribution.The theoretical analysis and simulation experiment results confirm that when N is 100 and the SNR is greater than 20 dB,the bit-error ratio(BER)is less than 1.5×10^(-2) under conditions in which the signal conforms to the optimal SR parameters.

Low-Noise Amplification, Detection and Spectroscopy of Ultra-Cold Systems in RF Cavities

The design and development of a cryogenic Ultra-Low-Noise Signal Amplification (ULNA) and detection system for spectroscopy of ultra-cold systems are reported here for the operation in the 0.5 - 4 GHz spectrum of frequencies (the “L” and “S” microwave bands). The design is suitable for weak RF signal detection and spectroscopy from ultra-cold systems confined in cryogenic RF cavities, as entailed in a number of physics, physical chemistry and analytical chemistry applications, such as NMR/NQR/EPR and microwave spectroscopy, Paul traps, Bose-Einstein Condensates (BEC’s) and cavity Quantum Electrodynamics (cQED). Using a generic Low-Noise Amplifier (LNA) architecture for a GaAs enhancement mode High-Electron Mobility FET device, our design has especially been devised for scientific applications where ultra-low-noise amplification systems are sought to amplify and detect weak RF signals under various conditions and environments, including cryogenic temperatures, with the least possible noise susceptibility. The amplifier offers a 16 dB gain and a 0.8 dB noise figure at 2.5 GHz, while operating at room temperature, which can improve significantly at low temperatures. Both dc and RF outputs are provided by the amplifier to integrate it in a closed-loop or continuous-wave spectroscopy system or connect it to a variety of instruments, a factor which is lacking in commercial LNA devices. Following the amplification stage, the RF signal detection is carried out with the help of a post-amplifier and detection system based upon a set of Zero-Bias Schottky Barrier Diodes (ZBD’s) and a high-precision ultra-low noise jFET operational amplifier. The scheme offers unique benefits of sensitive detection and very-low noise amplification for measuring extremely weak on-resonance signals with substantial low- noise response and excellent stability while eliminating complicated and expensive heterodyne schemes. The LNA stage is fully capable to be a part of low-temperature experiments while being operated in cryogenic conditions down to about 500 mK.

Harmonicity Spectrum

Perceiving harmonic information (especially weak harmonic information) in time series has important scientific and engineering significance. Fourier spectrum and time-frequency spectrum are commonly used tools for perceiving harmonic information, but they are often ineffective in perceiving weak harmonic signals because they are based on energy or amplitude analysis. Based on the theory of Normal time-frequency transform (NTFT) and complex correlation coefficient, a new type of spectrum, the Harmonicity Spectrum (HS), is developed to perceive harmonic information in time series. HS is based on the degree of signal harmony rather than energy or amplitude analysis, and can therefore perceive very weak harmonic information in signals sensitively. Simulation examples show that HS can detect harmonic information that cannot be detected by Fourier spectrum or time-frequency spectrum. Acoustic data analysis shows that HS has better resolution than traditional LOFAR spectrum.

Potential Transmission Choice for Internet of Things(IoT):Wireless and Batteryless Communications and Open Problems

The 5th generation mobile communications aims at connecting everything and future Internet of Things(IoT)will get everything smartly connected.To realize it,there exist many challenges.One key challenge is the battery problem for small devices,such as sensors or tags.Batteryless backscatter,also referred to as or battery-free backscatter,is a new potential technology to address this problem.One early and typical type of batteryless backscatter is ambient backscatter.Generally,batteryless backscatter utilizes environmental wireless signals to enable battery-free devices to communicate with each other.These devices first harvest energy from ambient wireless signals and then backscatter these signals so as to transmit their own information.This paper reviews the current studies about batteryless backscatter,including various backscatter schemes and theoretical works,and then introduces open problems for future research.

Asymmetric stochastic resonance under non-Gaussian colored noise and time-delayed feedback

Based on adiabatic approximation theory,in this paper we study the asymmetric stochastic resonance system with time-delayed feedback driven by non-Gaussian colored noise.The analytical expressions of the mean first-passage time(MFPT)and output signal-to-noise ratio(SNR)are derived by using a path integral approach,unified colored-noise approximation(UCNA),and small delay approximation.The effects of time-delayed feedback and non-Gaussian colored noise on the output SNR are analyzed.Moreover,three types of asymmetric potential function characteristics are thoroughly discussed.And they are well-depth asymmetry(DASR),well-width asymmetry(WASR),and synchronous action of welldepth and well-width asymmetry(DWASR),respectively.The conclusion of this paper is that the time-delayed feedback can suppress SR,however,the non-Gaussian noise deviation parameter has the opposite effect.Moreover,the correlation time plays a significant role in improving SNR,and the SNR of asymmetric stochastic resonance is higher than that of symmetric stochastic resonance.Our experiments demonstrate that the appropriate parameters can make the asymmetric stochastic resonance perform better to detect weak signals than the symmetric stochastic resonance,in which no matter whether these signals have low frequency or high frequency,accompanied by strong or weak noise.