An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine t...An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine the gain and loss of a laboratory CW Nd：YAG laser by using the Findlay-Clay approach. The ARR arm is then experimentally arranged inside the cavity of an arranged high power side-pumped CW Nd：YAG laser. A coated beam splitter with 50–50% re？ectivity at normal incidence is placed inside the cavity to provide a wide range of re？ectivity from 0 to 100%. This is performed by a rotatable stage and tilting the beam splitter by 10？ with the steps of 0.05. By changing the input electrical power of the laser pump the variation of the output laser power is monitored for 20 individual re？ectivity of ARR arm. Average pump threshold power of about 180 W is obtained. With the help of the derived equations and obtained threshold power, small signal gain and loss associated with the emerging beam is estimated. It is verified that the former is very dependent to the input parameters. Laser efficiency is also measures 5.6% which is quite comparable with the reported values.展开更多
Most of the direction of arrival(DOA) estimation methods often need the exact array manifold, but in actual applications,the gain and phase of the channels are usually inconsistent, which will cause the estimation inv...Most of the direction of arrival(DOA) estimation methods often need the exact array manifold, but in actual applications,the gain and phase of the channels are usually inconsistent, which will cause the estimation invalid. A novel direction finding approach for mixed far-field and near-field signals with gain-phase error array is provided. Based on simplifying the space spectrum function by matrix transformation, DOA of far-field signals is obtained. Consequently, errors of the array are acquired according to the orthogonality of far-field signal subspace and noise subspace.Finally, DOA of near-field signals can be estimated. The method merely needs one-dimensional spectrum searching, so as to improve the computational efficiency on the premise of ensuring a certain accuracy, simulation results manifest the effectiveness of the method.展开更多
在卫星信号接收的过程中,量化是模数转换的重要环节,信号量化会带来能量损失,对于信号后续的处理产生影响,根据信号特性选取合适的量化位数和系统基准功率可以有效改善这种损失.本文采用量化前后信号信噪比(signal to noise ratio,SNR)...在卫星信号接收的过程中,量化是模数转换的重要环节,信号量化会带来能量损失,对于信号后续的处理产生影响,根据信号特性选取合适的量化位数和系统基准功率可以有效改善这种损失.本文采用量化前后信号信噪比(signal to noise ratio,SNR)对比的形式来直观表示量化损耗,并给出了一般性分析公式.说明了自动增益控制(automatic gain control,AGC)模块在信号量化中的作用,结合量化损耗公式,通过确定最佳增益系数给出了一种基准功率的选取方式,使得不同SNR的信号量化损耗明显降低.仿真结果表明:在低位量化时,该方式对卫星导航信号的量化损耗能改善约1.5 dB.该分析对于接收机的设计以及工程实现具有一定的参考意义.展开更多
This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the...This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.展开更多
文摘An antiresonant ring （ARR） interferometer configuration is introduced for the characterization of a continuous wave （CW） Nd：YAG laser output. The output of the ARR device is precisely characterized to determine the gain and loss of a laboratory CW Nd：YAG laser by using the Findlay-Clay approach. The ARR arm is then experimentally arranged inside the cavity of an arranged high power side-pumped CW Nd：YAG laser. A coated beam splitter with 50–50% re？ectivity at normal incidence is placed inside the cavity to provide a wide range of re？ectivity from 0 to 100%. This is performed by a rotatable stage and tilting the beam splitter by 10？ with the steps of 0.05. By changing the input electrical power of the laser pump the variation of the output laser power is monitored for 20 individual re？ectivity of ARR arm. Average pump threshold power of about 180 W is obtained. With the help of the derived equations and obtained threshold power, small signal gain and loss associated with the emerging beam is estimated. It is verified that the former is very dependent to the input parameters. Laser efficiency is also measures 5.6% which is quite comparable with the reported values.
基金supported by the National Natural Science Foundation of China(6150117661505050)+5 种基金the University Nursing Program for Young Scholars with Creative Talents in Heilongjiang Province(UNPYSCT-2016017)the Natural Science Foundation of Heilongjiang Province(F2015015)the Outstanding Young Scientist Foundation of Heilongjiang University(JCL201504)the China Postdoctoral Science Foundation(2014M561381)the Postdoctoral Foundation of Heilongjiang Province(LBH-Z14178)the Special Research Funds for the Universities of Heilongjiang Province(HDRCCX-2016Z10)
文摘Most of the direction of arrival(DOA) estimation methods often need the exact array manifold, but in actual applications,the gain and phase of the channels are usually inconsistent, which will cause the estimation invalid. A novel direction finding approach for mixed far-field and near-field signals with gain-phase error array is provided. Based on simplifying the space spectrum function by matrix transformation, DOA of far-field signals is obtained. Consequently, errors of the array are acquired according to the orthogonality of far-field signal subspace and noise subspace.Finally, DOA of near-field signals can be estimated. The method merely needs one-dimensional spectrum searching, so as to improve the computational efficiency on the premise of ensuring a certain accuracy, simulation results manifest the effectiveness of the method.
文摘在卫星信号接收的过程中,量化是模数转换的重要环节,信号量化会带来能量损失,对于信号后续的处理产生影响,根据信号特性选取合适的量化位数和系统基准功率可以有效改善这种损失.本文采用量化前后信号信噪比(signal to noise ratio,SNR)对比的形式来直观表示量化损耗,并给出了一般性分析公式.说明了自动增益控制(automatic gain control,AGC)模块在信号量化中的作用,结合量化损耗公式,通过确定最佳增益系数给出了一种基准功率的选取方式,使得不同SNR的信号量化损耗明显降低.仿真结果表明:在低位量化时,该方式对卫星导航信号的量化损耗能改善约1.5 dB.该分析对于接收机的设计以及工程实现具有一定的参考意义.
基金Project supported in part by the National Natural Science Foundation of China (Grant No 60532010)the Talent Fund of Chinese Education Administration
文摘This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.
