In this paper, Wavelet Analysis Method (WAM) is introduced to analyse the non-stationary, shock signals. The theory and construction method of wavelet, the fast algorithms of wavelet analysis are presented. As an exam...In this paper, Wavelet Analysis Method (WAM) is introduced to analyse the non-stationary, shock signals. The theory and construction method of wavelet, the fast algorithms of wavelet analysis are presented. As an example, the gear testing signal has been analysed by WAM, and the results of WAM are compared with that of Fourier spectrum. The advantages of WAM are clearly shown.展开更多
Accurate test effectiveness estimation for analogue and mixed-signal Systems on a Chip (SoCs) is currently prohibitive in the design environment. One of the factors that sky rockets fault simulation costs is the numbe...Accurate test effectiveness estimation for analogue and mixed-signal Systems on a Chip (SoCs) is currently prohibitive in the design environment. One of the factors that sky rockets fault simulation costs is the number of structural faults which need to be simulated at circuit-level. The purpose of this paper is to propose a novel fault list compression technique by defining a stratified fault list, build with a set of “representative” faults, one per stratum. Criteria to partition the fault list in strata, and to identify representative faults are presented and discussed. A fault representativeness metric is proposed, based on an error probability. The proposed methodology allows different tradeoffs between fault list compression and fault representation accuracy. These tradeoffs may be optimized for each test preparation phase. The fault representativeness vs. fault list compression tradeoff is evaluated with an industrial case study—a DC-DC (switched buck converter). Although the methodology is presented in this paper using a very simple fault model, it may be easily extended to be used with more elaborate fault models. The proposed technique is a significant contribution to make mixed-signal fault simulation cost-effective as part of the production test preparation.展开更多
Separating noise from observed signals was studied.When the small defect in the T-shape laser welding joint was inspected by ultrasonic testing system adopting independent component analysis(ICA) theory to process the...Separating noise from observed signals was studied.When the small defect in the T-shape laser welding joint was inspected by ultrasonic testing system adopting independent component analysis(ICA) theory to process the signals.The principle of automatic ultrasonic testing signals processing and negentropy law of ICA were introduced.The experimental data were processed using relative analysis tools and results showed that the ICA could separate defects signals from noise effectively in laboratory.展开更多
Based on the asymptotic spectral distribution of Wigner matrices, a new normality test method is proposed via reforming the white noise sequence. In this work, the asymptotic cumulative distribution function （CDF） o...Based on the asymptotic spectral distribution of Wigner matrices, a new normality test method is proposed via reforming the white noise sequence. In this work, the asymptotic cumulative distribution function （CDF） of eigenvalues of the Wigner matrix is deduced. A numerical Kullback-Leibler divergence of the empiric-d spectral CDF based on test samples from the deduced asymptotic CDF is established, which is treated as the test statistic. For validating the superiority of our proposed normality test, we apply the method to weak SIPSK signal detection in the single-input single-output （SISO） system and the single-input multiple-output （SIMO） system. By comparing with other common normality tests and the existing signal detection methods, simulation results show that the proposed method is superior and robust.展开更多
In order to realize the real-time and precise test for a weapon system of a certain type of fighter,a signal classification method according to attributes is proposed,common input channels for multiple signals are con...In order to realize the real-time and precise test for a weapon system of a certain type of fighter,a signal classification method according to attributes is proposed,common input channels for multiple signals are configured optimally,and a test adapter and an adaptive signal conditioning module is designed. The hardware of conditioning module can be configured flexibly and the programmable test range can be adjusted owing to programmable multiplexer. An FPGA adaptive filter is designed by the calculated filter coefficient vectors with LMS method to solve the problem of parallel test of fighter weapon system in electromagnetic interference environment. The adaptive signal conditioning technology is characterized by high efficiency,precision and integration. Its application makes the test system successful to conduct real-time and parallel test for a weapon system,which is developed based on VXI bus and virtual-instrument technology.展开更多
The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generatio...The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.展开更多
Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tr...Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tracked on-line by building a time-varying parameter model, and then the relevant parameter spectrum can be obtained. The feasibility and advantages of the method are examined by digital simulation. The results of FTPVS at low-speed wind-tunnel promise the engineering application perspective of the method.展开更多
Vehicle turning movement data from signalized intersections is utilized for numerous applications in the field of transportation. Such applications include real-time adaptive signal control, dynamic traffic assignment...Vehicle turning movement data from signalized intersections is utilized for numerous applications in the field of transportation. Such applications include real-time adaptive signal control, dynamic traffic assignment, and traffic demand estimation. However, it is very time consuming and costly to obtain vehicle turning movement information manually. Previous efforts to simplify this process were focused on solving the problem using an O-D matrix, but this method proved to be inaccurate and unreliable with the existing data acquisition system. Another study involved the identification of vehicle turning movements from the detector information, but the presence of shared lanes led to uncertainties in vehicle matching, thus limiting application of the method only to intersections without shared lanes. In light of those unsuccessful attempts, this paper develops and tests a system called the Automatic Turning Movement Identification System (ATMIS), which estimates vehicle turning movements at a signalized intersection in real time, regardless of its geometry. The results from lab experiments as well as a field test show that the algorithm is very promising and may potentially be expanded for field applications.展开更多
文摘In this paper, Wavelet Analysis Method (WAM) is introduced to analyse the non-stationary, shock signals. The theory and construction method of wavelet, the fast algorithms of wavelet analysis are presented. As an example, the gear testing signal has been analysed by WAM, and the results of WAM are compared with that of Fourier spectrum. The advantages of WAM are clearly shown.
文摘Accurate test effectiveness estimation for analogue and mixed-signal Systems on a Chip (SoCs) is currently prohibitive in the design environment. One of the factors that sky rockets fault simulation costs is the number of structural faults which need to be simulated at circuit-level. The purpose of this paper is to propose a novel fault list compression technique by defining a stratified fault list, build with a set of “representative” faults, one per stratum. Criteria to partition the fault list in strata, and to identify representative faults are presented and discussed. A fault representativeness metric is proposed, based on an error probability. The proposed methodology allows different tradeoffs between fault list compression and fault representation accuracy. These tradeoffs may be optimized for each test preparation phase. The fault representativeness vs. fault list compression tradeoff is evaluated with an industrial case study—a DC-DC (switched buck converter). Although the methodology is presented in this paper using a very simple fault model, it may be easily extended to be used with more elaborate fault models. The proposed technique is a significant contribution to make mixed-signal fault simulation cost-effective as part of the production test preparation.
文摘Separating noise from observed signals was studied.When the small defect in the T-shape laser welding joint was inspected by ultrasonic testing system adopting independent component analysis(ICA) theory to process the signals.The principle of automatic ultrasonic testing signals processing and negentropy law of ICA were introduced.The experimental data were processed using relative analysis tools and results showed that the ICA could separate defects signals from noise effectively in laboratory.
基金Supported by the National Natural Science Foundation of China under Grant No 61371170the Fundamental Research Funds for the Central Universities under Grant Nos NP2015404 and NS2016038+1 种基金the Aeronautical Science Foundation of China under Grant No 20152052028the Funding of Jiangsu Innovation Program for Graduate Education under Grant No KYLX15_0282
文摘Based on the asymptotic spectral distribution of Wigner matrices, a new normality test method is proposed via reforming the white noise sequence. In this work, the asymptotic cumulative distribution function （CDF） of eigenvalues of the Wigner matrix is deduced. A numerical Kullback-Leibler divergence of the empiric-d spectral CDF based on test samples from the deduced asymptotic CDF is established, which is treated as the test statistic. For validating the superiority of our proposed normality test, we apply the method to weak SIPSK signal detection in the single-input single-output （SISO） system and the single-input multiple-output （SIMO） system. By comparing with other common normality tests and the existing signal detection methods, simulation results show that the proposed method is superior and robust.
基金Sponsored by the Key Equipment Research Project of Air Force of China (KJZ06119)
文摘In order to realize the real-time and precise test for a weapon system of a certain type of fighter,a signal classification method according to attributes is proposed,common input channels for multiple signals are configured optimally,and a test adapter and an adaptive signal conditioning module is designed. The hardware of conditioning module can be configured flexibly and the programmable test range can be adjusted owing to programmable multiplexer. An FPGA adaptive filter is designed by the calculated filter coefficient vectors with LMS method to solve the problem of parallel test of fighter weapon system in electromagnetic interference environment. The adaptive signal conditioning technology is characterized by high efficiency,precision and integration. Its application makes the test system successful to conduct real-time and parallel test for a weapon system,which is developed based on VXI bus and virtual-instrument technology.
文摘The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.
文摘Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tracked on-line by building a time-varying parameter model, and then the relevant parameter spectrum can be obtained. The feasibility and advantages of the method are examined by digital simulation. The results of FTPVS at low-speed wind-tunnel promise the engineering application perspective of the method.
文摘Vehicle turning movement data from signalized intersections is utilized for numerous applications in the field of transportation. Such applications include real-time adaptive signal control, dynamic traffic assignment, and traffic demand estimation. However, it is very time consuming and costly to obtain vehicle turning movement information manually. Previous efforts to simplify this process were focused on solving the problem using an O-D matrix, but this method proved to be inaccurate and unreliable with the existing data acquisition system. Another study involved the identification of vehicle turning movements from the detector information, but the presence of shared lanes led to uncertainties in vehicle matching, thus limiting application of the method only to intersections without shared lanes. In light of those unsuccessful attempts, this paper develops and tests a system called the Automatic Turning Movement Identification System (ATMIS), which estimates vehicle turning movements at a signalized intersection in real time, regardless of its geometry. The results from lab experiments as well as a field test show that the algorithm is very promising and may potentially be expanded for field applications.
