Fabrication and Pressureless Sintering of Silicon Carbide Refractories

This work studies the fabrication and pressureless sintering of silicon carbide(SiC)refractories.SiC particles were adopted as aggregates,introducing different amounts(20%,30%,40%,50%,and 60%,by mass)of submicron SiC powder,adding resin as the binder and the carbon source,and B4C as the sintering aid.It is found that when the mass ratio of B4C to the submicron SiC powder is 3%,the optimal sintering can be obtained.With the increase of the submicron powder addition,the sintering linear shrinkage increases and the mechanical properties enhance.The optimal sintering temperature is 2050-2100℃.

Carbothermal Reduction Synthesis of Al_2O_3-SiC Powders from Coal Gangue

The Al2O3 -SiC composite powders were prepared in argon atmosphere rising coal gangue and carbonaceous materials （ carbon black, active carbon and antbravite） as starting materials by carbothermal reduction. Effects of excessive carbon addition, carbon types. temperature, soaking time. shaping pressure, types and amount of additives on phase composition and micro-structure of the Al2O3 - SiC composite powders were investigated. The re.suits indicate that： temperature, soaking time and chloride additi＇ve have significant influence on the synthesized Al2O3 -SiC composite powders. Based on the results, the optimized Al2O3 -SiC composite powders , Al2O3 58 mass% and SiC 42 mass%, with particle size d50 ≤5μm were prepared using coal gangue and carbon black as starting materials after 3 h firing at 1550 ℃. and proper additive addition could reduce the temperattlre by 50 ℃.

Influence of high-temperature oxidation of SiC powders on curing properties of SiC slurry for digital light processing

Fabrication of silicon carbide(SiC)ceramics by digital light processing(DLP)technology is difficult owing to high refractive index and high ultraviolet(UV)absorptivity of SiC powders.The surface of the SiC powders can be coated with silicon oxide(SiO_(2))with low refractive index and low UV absorptivity via high-temperature oxidation,reducing the loss of UV energy in the DLP process and realizing the DLP preparation of the SiC ceramics.However,it is necessary to explore a high-temperature modification process to obtain a better modification effect of the SiC powders.Therefore,the high-temperature modification behavior of the SiC powders is thoroughly investigated in this paper.The results show that nano-scale oxide film is formed on the surface of the SiC powders by short-time high-temperature oxidation,effectively reducing the UV absorptivity and the surface refractive index(nʹ)of the SiC powders.When the oxidation temperature is 1300℃,compared with that of unoxidized SiC powders,the UV absorptivity of oxidized SiC powders decreases from 0.5065 to 0.4654,and a curing depth of SiC slurry increases from 22±4 to 59±4μm.Finally,SiC green bodies are successfully prepared by the DLP with the the oxidized powders,and flexural strength of SiC sintered parts reaches 47.9±2.3 MPa after 3 h of atmospheric sintering at 2000℃without any sintering aid.