A Simple Method for Source Depth Estimation with Multi-path Time Delay in Deep Ocean

A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay arrivals of surface-bottom reflection and bottom-surface reflection intersect at the source depth. Two hydrophones deployed vertically with a certain interval are required at least. If the receiver depths are known, the pair of time delays can be used to estimate the source depth. With the proposed method the source depth can be estimated successfully in a moderate range in the deep ocean without complicated matched-field calculations in the simulations and experiments.

Simple Method to Fabricate Au Nanoparticle-Decorated TiO2 Nanotube Arrays for Enhanced Visible Light Photocurrent

Au nanoparticle-decorated TiO2 nanotube arrays are prepared by a simple method, which is a thermal annealing thin gold film deposited on anodie oxidized TiO2 nanotube arrays. These electron microscope images present that Au nanoparticles are well dispersed within the wall and on the surface of the XiO2 nanotubes. Meanwhile, the morphologies of Au nanoparticles can be controlled by changing the thickness of the deposited gold film. Associ- ated with the excitation of localized surface plasmon resonances, the prepared Au nanoparticle-decorated TiO2 nanotube arrays could work as visible light responsive photocatalysts to produce a greatly enhanced photocurrent density. By varying the initial gold film thickness, such Au nanoparticle-decorated TiO2 nanotube arrays could be optimized to obtain the highest photocurrent generation efficiency in the visible and UV light regions.

A SIMPLE METHOD TO CALCULATE RESONANCE ENERGY

A very simple method to calculate resonance energies of conjugated hydrocarbons by counting carbon numbers was introduced.

An Advanced Simple Method for Generating Synthetic Average Instant Hourly Solar Energy

The main objective of this study is to generate accurate synthetic hourly solar radiation data by using an easily accessible open source data.In this regard,a new approach is proposed for estimation of synthetic hourly global solar radiation during the day by utilizing only annual solar energy data.First time in literature,a model has been developed for prediction hourly and daily solar radiation based on annual solar energy parameter in this study.Parameters of the model were generated and tested for Turkey and one of them was presented as a case study within this paper.Long term measured hourly horizontal solar irradiance data from a network of Turkish meteorological stations was used to calibrate the model function.The predictions are compared with the solar data available in literature for Turkey.The advanced simple new model is utilized in open source computer program and has the potential to be adapted to other countries.

Simple and effective method for treating severe adult skeletal class II malocclusion: A case report

BACKGROUND Severe skeletal class II malocclusion is the indication for combined orthodontic and orthognathic treatment.CASE SUMMARY A woman with a chief complaint of a protruding chin and an inability to close her lips requested orthodontic camouflage.The treatment plan consisted of extracting the right upper third molar,right lower third molar,left lower second molar,and left upper third molar and moving the maxillary dentition distally using a convenient method involving microimplant nail anchors,push springs,long arm traction hooks,and elastic traction chains.After 52 months of treatment,her overbite and overjet were normal,and her facial profile was favorable.CONCLUSION This method can be used for distal movement of the maxillary dentition and to correct severe skeletal class II malocclusion in adults.

Study of active beam steering system with a simple method

We develope a simple method to stabilize the beam during propagation. Combination of the self-developed control module and the large diameter mirrors reconstruct the beam stabilization system, and some important procedures are presented, such as calibration arid average filter. The results show that the horizontal pointing and vertical pointing are stabilized to within 8.43 and 7.59 μrad, and the beam horizontal position and vertical position are stabilized to within 2.16 and 2.11 μm respectively. The regulating time is within 84 ms. Thus the method presented is effective for the current stabilization system applied in lithography tools.

A simple method for evaluating liquefaction potential from shear wave velocity

The simplified procedure using shear wave velocity measurements is increasingly used to evaluate the seismic liquefaction potential of soils.This procedure is based on finding the boundary separating the liquefactionand non-liquefaction cases through the analysis of liquefaction case histories,following the general format of the Seed-Idriss simplified procedure based on standard penetration test(SPT)data.It is noted that many assumptions have been made in the simplified procedure.This paper develops a simple method for evaluating the liquefaction potential of soils from shear wave velocity by using the optimum seeking method to directly analyze the liquefaction history data and quantify the influence of major factors affecting the liquefactions potential of soils.The factors considered are the earthquake magnitude,the vertical effective overburden stress,the shear wave velocity,the peak acceleration at the ground surface of the site,and the fines content of the soil.The most important factor has been identified as the shear wave velocity.The developed method uses the measured data directly and in a very simple way.Neither stress-correction of shear wave velocity nor calculation of cyclic shear stress as in the simplified procedure is required.Comparisons indicate that the developed simple method has a higher success rate for evaluating liquefaction potential of soils than the simplified procedure.A case study is presented to illustrate the application of the developed simple method and further confirms its accuracy.

A Simple Method to Improve Heart-attack Repair Using Stem Cell-derived Heart Muscle Cells

The heart cannot regenerate muscle tissue after a heart attack has killed part of the muscle wall.That dead tissue can strain surrounding muscle,leading to a lethal heart enlargement.Biomedical engineers believe they can aid the failing heart by using pluripotent stem cells to grow heart muscle cells outside of the body,and then injecting those muscle cells or adding a patch made from those cells,at or near the site of the dead heart tissue.Experimental and clinical trial evidence with this approach has shown moderate improvement of the pumping ability of the heart's left ventricle.

Application of simple array method in one-way traffic synthetic asessment

One-Way Traffic synthetic assessing can not only determine the assessment method, but can also provide an opportunity for further study of road systems. Comparing three Road Traffic Planning methods, which are Value Analysis method, Simple Array method and Step Analysis method, this paper concludes that Simple Array method has one prominent merit, avoiding the complicated relationship of various factors and simplifying the complex problem. Therefore Simple Array method is firstly presented in this paper to be the assessing measure to assess the One-Way Traffic Planning project. Although this assessing method cannot wholly give way to man’s will, through consistently testing on qualitative factors and with the decision-making results of a multi-program, this method is still an effective method. Using an example of Harbin One-Way Traffic planning, with seven assessing indexes including economic benefit index, Simple Array method is applied to synthetically assessing the program. This fully reflects the general function of One-Way Traffic planning program and objectively evaluates the program. It also proves that, as the method of One-Way Traffic synthetic assessing, Simple Array method is rational and practical.

A Simple Deposition Method for Self-Assembling Single Crystalline Hybrid Perovskite Nanostructures

A sequential deposition method is developed, where the hybrid organic-inorganic halide perovskite （CH3NH3Pb （I1-xBrx）3 ） is synthesized using precursor solutions containing CH3NH3I and PbBr2 with different mole ratios and reaction times. The perovskite achieved here is quite stable in the atmosphere for a relatively long time without noticeable degradation, and the perovskite nanowires are proved to be single crystalline structure, based on transmission electron microscopy.Furthermore, strong red photoluminescence from perovskite is observed in the wavelength range from 746nm to 770nm with the increase of the reaction time, on account of the exchanges between I- ions and Br- ions in the perovskite crystal. Lastly, the influences of concentration and reaction time of the precursor solutions are discussed, which are important for evolution of hybrid perovskite from nanocuboid to nanowire and nanosheet.

Propagation of traveling wave solutions to the Vakhnenko-Parkes dynamical equation via modified mathematical methods

In this paper, we investigate some new traveling wave solutions to Vakhnenko-Parkes equation via three modified mathematical methods. The derived solutions have been obtained including periodic and solitons solutions in the form of trigonometric, hyperbolic, and rational function solutions. The graphical representations of some solutions by assigning particular values to the parameters under prescribed conditions in each solutions and comparing of solutions with those gained by other authors indicate that these employed techniques are more effective, efficient and applicable mathematical tools for solving nonlinear problems in applied science.

Application of uncertainty reasoning based on cloud model in time series prediction

Time series prediction has been successfully used in several application areas, such as meteoro-logical forecasting, market prediction, network traffic forecasting, etc. , and a number of techniques have been developed for modeling and predicting time series. In the traditional exponential smoothing method, a fixed weight is assigned to data history, and the trend changes of time series are ignored. In this paper, an uncertainty reasoning method, based on cloud model, is employed in time series prediction, which uses cloud logic controller to adjust the smoothing coefficient of the simple exponential smoothing method dynamically to fit the current trend of the time series. The validity of this solution was proved by experiments on various data sets.

The Modified Simple Equation Method and the Multiple Exp-function Method for Solving Nonlinear Fractional Sharma-Tasso-Olver Equation

In this article, the fractional derivatives in the sense of the modified Riemann-Liouville derivatives together with the modified simple equation method and the multiple exp-function method are employed for constructing the exact solutions and the solitary wave solutions for the nonlinear time fractional Sharma-Tasso- Olver equation. With help of Maple, we can get exact explicit l-wave, 2-wave and 3-wave solutions, which include l-soliton, 2-soliton and 3-soliton type solutions if we use the multiple exp-function method while we can get only exact explicit l-wave solution including l-soliton type solution if we use the modified simple equation method. Two cases with specific values of the involved parameters are plotted for each 2-wave and 3-wave solutions.

Comparative numerical study of single and two-phase models of nanofluid heat transfer in wavy channel

The main purpose of this study is to survey numerically comparison of two- phase and single phase of heat transfer and flow field of copper-water nanofluid in a wavy channel. The computational fluid dynamics （CFD） prediction is used for heat transfer and flow prediction of the single phase and three different two-phase models （mixture, volume of fluid （VOF）, and Eulerian）. The heat transfer coefficient, temperature, and velocity distributions are investigated. The results show that the differences between the temperature fie].d in the single phase and two-phase models are greater than those in the hydrodynamic tleld. Also, it is found that the heat transfer coefficient predicted by the single phase model is enhanced by increasing the volume fraction of nanoparticles for all Reynolds numbers; while for the two-phase models, when the Reynolds number is low, increasing the volume fraction of nanoparticles will enhance the heat transfer coefficient in the front and the middle of the wavy channel, but gradually decrease along the wavy channel.

A SIMPLE FINITE ELEMENT METHOD FOR THE REISSNER-MINDLIN PLATE

A simple finite element method for the Reissner-Mindlin plate model in the primitive variables is presented and analyzed. The method uses conforming linear finite elements for both the transverse displacement and rotation. It is proved that the method converges with optimal order uniformly with respect to thickness.It is simpler and more economical than the Arnold-Falk element[1].

Exact Solutions of Kolmogorov-Petrovskii-Piskunov Equation Using the Modified Simple Equation Method

The modified simple equation method is employed to find the exact solutions of the nonlinear Kolmogorov-Petrovskii-Piskunov （KPP） equation. When certain parameters of the equations are chosen to be special values, the solitary wave solutions are derived from the exact solutions. It is shown that the modified simple equation method provides an effective and powerful mathematical tool for solving nonlinear evolution equations in mathematical physics.

Macro- and micromechanical evaluation of cyclic simple shear test by discrete element method

Direct simple shear tests are considered to be simple laboratory tests that are capable of imposing a cyclic loading that is analogous to that induced by earthquakes. A realistic evaluation of the test results demands a profound micromechanical investigation of specimens. Three-dimensional discrete element method models of a stacked-ring simple shear test were constructed, in which monotonic and cyclic loadings were applied under constant-volume conditions, and good agreement between the monotonic and cyclic macromechanical behaviors was noted. Micromechanical properties of specimens that were subjected to a cyclic loading are discussed in terms of lateral and intermediate principal stress development, fabric anisotropy, and principal stress rotation. The stress and strain states inside the specimen were investigated and it was shown that despite the uniform stress distribution inside the specimen, the volumetric strain distributes non-uniformly during loading and the non-uniformity grows with cycling, which leads to localized zones of dilative and contractive behavior.

Solitary Wave Solutions to the ZKBBM Equation and the KPBBM Equation via the Modified Simple Equation Method

In this article, the modified simple equation method （MSE） is used to acquire exact solutions to nonlinear evolution equations （NLEEs） namely the Zakharov- Kuznetsov Benjamin-Bona-Mahony equation and the Kadomtsov-Petviashvilli Benjamin-Bona-Mahony equation which have widespread usage in modern science. The MSE method is ascending and useful mathematical tool for constructing exact travel- ing wave solutions to NLEEs in the field of science and engineering. By means of this method we attained some significant solutions with free parameters and for special values of these parameters, we found some soliton solutions derived from the exact solutions. The solutions obtained in this article have been shown graphically and also discussed physically.

Simple and effective method to improve the signal-to-noise ratio of compressive imaging

This Letter presents a simple and effective method to improve the signal-to-noise ratio（SNR） of compressing imaging. The main principles of the proposed method are the correlation of the image signals and the randomness of the noise. Multiple low SNR images are reconstructed firstly by the compressed sensing reconstruction algorithm, and then two-dimensional time delay integration technology is adopted to improve the SNR. Results show that the proposed method can improve the SNR performance efficiently and it is easy to apply the a lgorithm to the real project.