The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different c...The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different combinations of simulated flue gas. The reaction between fly ash and 100% CO2 was relatively fast; the uptake of CO2 reached 87 g CO2/kg ash, and the sequestered CO2 could be entirely released at high temperatures. When CO2 content was reduced to 12%, the reaction rate decreased; the uptake fell to 41 g CO2/kg ash, and 70.7% of the sequestered CO2 could be released. With 12% CO2 in the presence of SO2, the reaction rate significantly decreased; the uptake was just 17 g CO2/kg ash, and only 52.9% of the sequestered CO2 could be released. SO2 in the simulated gas restricted the ability of fly ash to sequester CO2 because it blocked the pores of the ash.展开更多
The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas （TIG） welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodyna...The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas （TIG） welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy （EIS） and immersion tests. The effects of heat input and shielding gases on the corrosion behavior of the welded titanium were also studied. Grain coarsening and Widmanst^itten structure were found in both the fusion zone and the heat-affected zone. The welded titanium exhibited active-passive behavior in the simulated condensates. Both the polarization curves and EIS measurements confirmed that TIG welding process with different parameters had few effects on the corrosion behavior. It was proved that the microstructure changes were not the key material factors affecting the corrosion behavior of pure titanium under the test conditions, while the oxide film had remarkable effect on improving the corrosion resistance.展开更多
基金supported by the Hi-Tech Research and Development Program (863) of China (No. 2012AA06A116)
文摘The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different combinations of simulated flue gas. The reaction between fly ash and 100% CO2 was relatively fast; the uptake of CO2 reached 87 g CO2/kg ash, and the sequestered CO2 could be entirely released at high temperatures. When CO2 content was reduced to 12%, the reaction rate decreased; the uptake fell to 41 g CO2/kg ash, and 70.7% of the sequestered CO2 could be released. With 12% CO2 in the presence of SO2, the reaction rate significantly decreased; the uptake was just 17 g CO2/kg ash, and only 52.9% of the sequestered CO2 could be released. SO2 in the simulated gas restricted the ability of fly ash to sequester CO2 because it blocked the pores of the ash.
基金supported by the National Natural Science Foundation of China (No.51131008)
文摘The corrosion behaviors of pure titanium and its weldment welded by tungsten inert gas （TIG） welding in simulated desulfurized flue gas condensates in thermal power plant chimney were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy （EIS） and immersion tests. The effects of heat input and shielding gases on the corrosion behavior of the welded titanium were also studied. Grain coarsening and Widmanst^itten structure were found in both the fusion zone and the heat-affected zone. The welded titanium exhibited active-passive behavior in the simulated condensates. Both the polarization curves and EIS measurements confirmed that TIG welding process with different parameters had few effects on the corrosion behavior. It was proved that the microstructure changes were not the key material factors affecting the corrosion behavior of pure titanium under the test conditions, while the oxide film had remarkable effect on improving the corrosion resistance.
