Single event effects evaluation on convolution neural network in Xilinx 28 nm system on chip

Convolutional neural networks(CNNs) exhibit excellent performance in the areas of image recognition and object detection, which can enhance the intelligence level of spacecraft. However, in aerospace, energetic particles, such as heavy ions, protons, and alpha particles, can induce single event effects(SEEs) that lead CNNs to malfunction and can significantly impact the reliability of a CNN system. In this paper, the MNIST CNN system was constructed based on a 28 nm systemon-chip(SoC), and then an alpha particle irradiation experiment and fault injection were applied to evaluate the SEE of the CNN system. Various types of soft errors in the CNN system have been detected, and the SEE cross sections have been calculated. Furthermore, the mechanisms behind some soft errors have been explained. This research will provide technical support for the design of radiation-resistant artificial intelligence chips.

The Application of Multitasking Mechanism in Single Chip Computer System

Developed a new program structure using in single chip computer system, which based on multitasking mechanism. Discussed the specific method for realization of the new structure. The applied sample is also provided.

Use of single chip microcomputer in hydraulic digital adaptive control system

Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.

Single-event effects induced by medium-energy protons in 28 nm system-on-chip

Single-event effects(SEEs)induced by mediumenergy protons in a 28 nm system-on-chip(SoC)were investigated at the China Institute of Atomic Energy.An on-chip memory block was irradiated with 90 MeV and 70 MeV protons,respectively.Single-bit upset and multicell upset events were observed,and an uppermost number of nine upset cells were discovered in the 90 MeV proton irradiation test.The results indicate that the SEE sensitivities of the 28 nm SoC to the 90 MeV and 70 MeV protons were similar.Cosmic Ray Effects on Micro-Electronics Monte Carlo simulations were analyzed,and it demonstrates that protons can induce effects in a 28 nm SoC if their energies are greater than 1.4 MeV and that the lowest corresponding linear energy transfer was 0.142 MeV cm^2 mg^-1.The similarities and discrepancies of the SEEs induced by the 90 MeV and 70 MeV protons were analyzed.

Identifying EGFR-Expressed Cells and Detecting EGFR Multi-Mutations at Single-Cell Level by Microfluidic Chip

EGFR mutations companion diagnostics have been proved to be crucial for the efficacy of tyrosine kinase inhibitor targeted cancer therapies. To uncover multiple mutations occurred in minority of EGFR-mutated cells,which may be covered by the noises from majority of unmutated cells, is currently becoming an urgent clinical requirement. Here we present the validation of a microfluidic-chip-based method for detecting EGFR multimutations at single-cell level. By trapping and immunofluorescently imaging single cells in specifically designed silicon microwells, the EGFR-expressed cellswere easily identified. By in situ lysing single cells, the cell lysates of EGFR-expressed cells were retrieved without cross-contamination. Benefited from excluding the noise from cells without EGFR expression, the simple and cost-effective Sanger's sequencing, but not the expensive deep sequencing of the whole cell population, was used to discover multi-mutations. We verified the new method with precisely discovering three most important EGFR drugrelated mutations from a sample in which EGFR-mutated cells only account for a small percentage of whole cell population. The microfluidic chip is capable of discovering not only the existence of specific EGFR multi-mutations,but also other valuable single-cell-level information: on which specific cells the mutations occurred, or whether different mutations coexist on the same cells. This microfluidic chip constitutes a promising method to promote simple and cost-effective Sanger's sequencing to be a routine test before performing targeted cancer therapy.

SF VECTOR CONTROL SYSTEM WITH TWO SINGLE CHIP MICROPROCESSORS

This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.

Combination of Micro-fluidic Chip with Fluorescence Correlation Spectroscopy for Single Molecule Detection

A single molecule detection technique was developed by the combination of a single channel poly （dimethylsiloxane）/glass micro-fluidic chip and fluorescence correlation spectroscopy （FCS）. This method was successfully used to determine the proportion of two model components in the mixture containing fluorescein and the rhodamine-green succinimidyl ester.

Gas concentration monitoring system for small and medium-sized coal mines based on gas-sensing detection and single-chip control

这份报纸针对气体在小、中型的煤矿引起的灾难的实际条件。为煤矿监视系统的新煤气的集中根据煤气察觉到的察觉和单个薄片的控制被开发。因为它为易燃、爆炸的气体有好敏感特征，监视系统把锡氧化物用作 N 类型半导体气体传感器的主要材料(例如甲烷，碳一氧化物) 。QM-N5-semiconductor 煤气的传感器被采用在不同煤气的集中下面检测抵抗的产量价值。故意地，系统拿数字薄片抵抗作为处理硬件结构分析并且判定输入的电路的核心珍视的 AT89C51，然后为超出煤气的集中的限制完成控制和警报。监视系统的煤气的集中有许多优点包括在结构，快反应时间，稳定的表演和低费用简单。因此，监视煤气的集中并且在小、中型的煤矿提供早警告能广泛地被用来。

A Single Mode Hybrid Ⅲ-Ⅴ/Silicon On-Chip Laser Based on Flip-Chip Bonding Technology for Optical Interconnection

A single mode hybrid Ⅲ-Ⅴ/silicon on-chip laser based on the flip-chip bonding technology for on-chip optical interconnection is demonstrated. A single mode Fabry-Perot laser structure with micro-structures on an InP ridge waveguide is designed and fabricated on an InP/AIGaInAs multiple quantum well epitaxial layer structure wafer by using i-line lithography. Then, a silicon waveguide platform including a laser mounting stage is designed and fabricated on a silicon-on-insulator substrate. The single mode laser is flip-chip bonded on the laser mounting stage. The lasing light is butt-coupling to the silicon waveguide. The laser power output from a silicon waveguide is 1.3roW, and the threshold is 37mA at room temperature and continuous wave operation.

Development of single-chip fuzzy controller based on FFSI in binary

Length and concise structure of fuzzy logic reasoning program and its real-time reasoning characteris-tic have their effect on the performance of a digital single-chip fuzzy controller. The control effect of a digitalfuzzy controller based on looking up fuzzy control responding table is only relative to the table and not relative tothe fuzzy control rules in the practical control process. Aiming at above problem and having combined fuzzy log-ic reasoning with digital operational characteristics of a single-chip microcomputer, functioning-fuzzy-subset in-ference (FFSI) in binary, in which triangle membership functions of error and error-in-change are all represen-ted in binary and singleton membership functions of control variable is binary too, has been introduced. The cir-cuit principle plans of a single-chip fuzzy controller have been introduced for development of its hardware, andthe primary program structure, fuzzy logic reasoning subroutine, serial communication subroutine with PC andreliability design of the fuzzy controller are all discussed in detail. The control of indoor temperature by a fuzzycontroller has been conducted using a testing-room thermodynamic system. Research results show that the FFSIin binary can exercise a concise fuzzy control in a single-chip fuzzy controller, and the fuzzy controller is there-fore reliable and possesses a high performance-price ratio.

Design and Research of Intelligent Alcohol Detector Based on Single Chip Microcomputer

In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance.

DESIGNOFMULTI┐SLOTANDUNEQUAL┐TEMPERATUREPIDCONTROLLERBASEDONSINGLECHIPMICROCOMPUTER

以一个具体的生产过程为例，介绍以单片机为核心的多段不等温PID控制器的设计。文中讨论了PID算法数学实现的模型及实现该算法的软硬件设计方法。

A Single-Chip UHF RFID Reader Transceiver IC

A single-chip UHF RFID reader transceiver IC has been implemented in 0.18 μm SiGe BiCMOS technology. The chip includes all transceiver blocks as RX/TX RF front-end, RX/TX analog baseband, frequency synthesizer and I2C with fully-compliant China 800/900 MHz RFID draft, ISO/IEC 18000-6C protocol and ETSI 302 208-1 local regulation. The normal mode receiver in the presence of -3 dBm self-jammer achieves -75 dBm 1% PER sensitivity. The linear class-A PA integrated in transmitter has 25 dBm OP1 dB output power for CW. The fully-integrated fractional-N fre-quency synthesizer is designed based on MASH 1-1-1 sigma-delta modulator and 1.8 GHz fundamental frequency LC-VCO for lower in-band and out-of-band phase noise. The measured phase noise is up to -106 dBc/Hz@200 kHz and -131 dBc/Hz@1 MHz offset from center frequency and the integrated RMS jitter from 10 kHz to 10 MHz is less than 1.6 pS. The chip dissipates 330 mA from 3.3 V power supply when transmitting 22.4 dBm CW signal and the PAE of linear PA is up to 26%. The chip die area is 16.8 mm2.

Design of an Automated Sorting System for Apples Based on Single Chip Microcomputer

The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic.

The Temperature Intelligence Control System Based on Single Chip-Microprocessor

The paper introduces a temperature control systembased on AT89C51 single-chip-microprocessor, and discussesthe principle , hardware structure, and software design of thissystem in detail.

Proper In deposition amount for on-demand epitaxy of InAs/GaAs single quantum dots

The test-QD in-situ annealing method could surmount the critical nucleation condition of InAs/GaAs single quantum dots（SQDs） to raise the growth repeatability.Here,through many growth tests on rotating substrates,we develop a proper In deposition amount（θ） for SQD growth,according to the measured critical θ for test QD nucleation（θ;）.The proper ratio θ/θ;,with a large tolerance of the variation of the real substrate temperature(T;),is 0.964-0.971 at the edge and> 0.989 but < 0.996 in the center of a 1/4-piece semi-insulating wafer,and around 0.9709 but < 0.9714 in the center of a 1/4-piece N;wafer as shown in the evolution of QD size and density as θ/θ;varies.Bright SQDs with spectral lines at 905 nm-935 nm nucleate at the edge and correlate with individual 7 nm-8 nm-height QDs in atomic force microscopy,among dense 1 nm-5 nm-height small QDs with a strong spectral profile around 860 nm-880 nm.The higher T;in the center forms diluter,taller and uniform QDs,and very dilute SQDs for a proper θ/θ;:only one 7-nm-height SQD in25 μm;.On a 2-inch（1 inch = 2.54 cm） semi-insulating wafer,by using θ/θ;= 0.961,SQDs nucleate in a circle in 22%of the whole area.More SQDs will form in the broad high-T;region in the center by using a proper θ/θ;.

基于AT89S52单片机的稻作区智能灌溉控制系统设计

【目的】克服稻作区田间难以铺设电路等难题,实现田间灌溉无人化,提高安徽省稻作区灌溉智能化和精准化水平,探索利用新一代电子信息技术实现智能灌溉的可行性。【方法】本文设计了一种基于AT89S52单片机的稻作区智能灌溉控制系统,包括一体化提拉式水闸、灌溉硬件子系统和灌溉软件子系统。闸门采用一体化设计,集成了以AT89S52单片机为控制器的中央处理单元模块、传感器感知模块和太阳能供电模块;以Keil C语言开发了闸门终端控制软件,以C++语言开发了系统上位机控制软件。【结果】应用试验表明,本系统运行安全稳定,电机自动控制响应时间<1 s,闸门开度控制误差<1.5 mm,闸前、后水位控制误差<8 mm,数据传输丢包率最大为0.11%,自由出流状态下闸门流量计算误差<1%,淹没出流状态下闸门流量计算误差<1.2%。【结论】本系统运行安全稳定,在室外环境条件下响应速度快,可满足稻作区田间灌溉复杂环境下用水智能化和精准化的要求。

OBE理念下智慧教室监控系统案例设计

将基于学习产出的教育模式(Outcome Based Education,OBE)引入单片机课程实践教学之中,设计了智慧教室监控系统的教学案例。系统可实现手动控灯和自动控灯、时钟显示、语音播报等功能。在实践中,以目标成果为导向,分功能模块,设计不同难度的学习目标,将虚拟仿真和实物搭建相结合,训练和培养学生基础模块知识、系统分析设计能力、专业素养和人文素养,循序渐进,并将融入思政元素和培养能力贯穿教学全过程,为其他专业课程实践教学提供参考。

基于虚拟实验教学平台的单片机控制技术课程实践教学改革研究

通过分析单片机控制技术课程实验教学现状,重构课程教学内容和教学方法,构建虚拟仿真实验教学平台,开展项目式学习。以防盗报警器实验项目为例,具体介绍了教学案例设计并分析了教学效果。实践证明,项目式虚拟仿真实验教学模式有助于学生的创新应用能力、小组协作能力及问题解决能力等综合素质的提升。

基于ETPP模式的单片机原理与接口技术课程实践教学改革探索

针对单片机原理与接口技术课程在传统实践教学过程中,学生受规定时间、固定地点、指定实验设备的限制,实践与创新热情不能充分发挥的问题,该文以学生发展为中心,以提高学生实践能力为核心,构建ETPP渐进式从理论到实践、从仿真到实操的新型实践教学模式,打造完整的实践教学生态和全过程综合考核评价体系。学生使用51系列、STC15系列、Arduino UNO R3和STM32四种单片机便携式实验装置和多种传感器及外设模块,随时随地学习并实践,激发主动学习和探索实践的热情。实践教学表明,ETPP模式能够更好地培养实践能力强、创新能力强、符合社会需求的复合型创新型新工科人才,具有良好的教学效果。