Laser patterning of large-scale perovskite single-crystal-based arrays for single-mode laser displays

Lead halide perovskites have attracted considerable attention as potential candidates for high-performance nano/microlasers,owing to their outstanding optical properties.However,the further development of perovskite microlaser arrays(especially based on polycrystalline thin films)produced by the conventional processing techniques is hindered by the chemical instability and surface roughness of the perovskite structures.Herein,we demonstrate a laser patterning of large-scale,highly crystalline perovskite single-crystal films to fabricate reproducible perovskite single-crystal-based microlaser arrays.Perovskite thin films were directly ablated by femtosecond-laser in multiple low-power cycles at a minimum machining line width of approximately 300 nm to realize high-precision,chemically clean,and repeatable fabrication of microdisk arrays.The surface impurities generated during the process can be washed away to avoid external optical loss due to the robustness of the single-crystal film.Moreover,the high-quality,large-sized perovskite single-crystal films can significantly improve the quality of microcavities,thereby realizing a perovskite microdisk laser with narrow linewidth(0.09 nm)and low threshold(5.1µJ/cm2).Benefiting from the novel laser patterning method and the large-sized perovskite single-crystal films,a high power and high color purity laser display with single-mode microlasers as pixels was successfully fabricated.Thus,this study may offer a potential platform for mass-scale and reproducible fabrication of microlaser arrays,and further facilitate the development of highly integrated applications based on perovskite materials.

Fluctuations of Single-Mode Laser Driven by Two Different Kinds of Colored Noise

A single-mode laser with coupling between additive and multiplicative noise terms is investigated when the multiplicative noise and the coupling between two noise terms are colored fluctuations with finite correlation times T1 and T2. Combining the unified colored noise approximation （UCNA） and the functional analysis, the stationary probability distribution （SPD） and the variance of the laser intensity is derived. It is found that the colored nature of multiplicative noise and the coupling strength between two noise terms can affect both the structure and the height of the SPD, while the colored nature of the coupling between two noise terms can only affect the height of the SPD. The multiplicative noise can enhance the intensity fluctuations while the additive noise can reduce the fluctuations in a laser system. Numerical simulations are presented and consistent to the analytical results.

Stochastic Resonance in Linear Region of a Single-Mode Laser: Effects of Amplitude Modulation of Signal

A single-mode laser noise model driven by quadratic colored pump noise and amplitude modulation signal is proposed. The real and imaginary parts of the pump noise are assumed to be cross-correlation. The effect of cross- correlation of noise and amplitude modulation of signal on laser statistical properties is studied by using the linearized approximation. The analytic expression of signal-to-noise ratio （SNR） is calculated. It is found that the phenomena of stochastic resonance （SR） respectively exist in the curves of the SNR versus the noise cross-correlation coefficient λ and the SNR versus the pump parameter a, as well as the SNR versus the signal frequency ω in our model. It is shown that there are three different typies of SR in the model： the conventional form of SR, the SR in the broad sense, and the bona fide SR.

Stochastic resonance in a single-mode laser driven by frequency modulated signal and coloured noises

By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calculate the power spectrum and signal-to-noise ratio （SNR） of the laser intensity. The results show that the SNR appears typical stochastic resonance with the variation of intensity of the pump noise and quantum noise. As the amplitude of a modulated signal has effects on the SNR, it shows suppression, monotone increasing, stochastic resonance, and multiple stochastic resonance with the variation of the frequency of a carrier signal and modulated signal.

Time-Delayed Feedback Control in a Single-Mode Laser System

The effects of time-delayed feedback control in a single-mode laser system is investigated.Using the smalltime delay approximation,the analytic expression of the stationary probability distribution function of the laser field isobtained.The mean,normalized variance and skewness of the steady-state laser intensity are calculated.It is found thatthe time-delayed feedback control can suppress the intensity fluctuation of the laser system.The numerical simulationsare in good agreement with the approximate analytic results.

Stationary properties of a single-mode laser system with non-Gaussian and Gaussian noise

A single-mode laser system with non-Gaussian and Gaussian noise is investigated. The stationary mean value and the normalized variance of the laser intensity are numerically calculated under the condition that the stationary probability distribution function （SPDF） is derived. The SPDF as a function of the laser intensity exhibits a maximum, The maximum becomes smaller with the increase of the correlation intensity or the non-Gaussian parameter, where the later is a measure of the deviation from the Gaussian characteristic. The maximum becomes larger as the correlation time increases. The laser intensity stationary mean value decreases with the increase of the correlation intensity or the non-Gaussian parameter while increases with the correlation time increasing. The laser intensity normalized variance increases with the increase of the correlation intensity or the non-Gaussian parameter while decreases as the correlation time increases.

High power semiconductor laser array with single-mode emission

The semiconductor laser array with single-mode emission is presented in this paper.The 6-μm-wide ridge waveguides(RWGs)are fabricated to select the lateral mode.Thus the fundamental mode of laser array can be obtained by the RWGs.And the maximum output power of single-mode emission can reach 36 W at an injection current of 43 A,after that,a kink will appear.The slow axis(SA)far-field divergence angle of the unit is 13.65.The beam quality factor M;of the units determined by the second-order moment(SOM)method,is 1.2.This single-mode emission laser array can be used for laser processing.

The statistical fluctuation of a single-mode laser system driven by coloured pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts

Using the linear approximation method, this paper studies the statistical property of a single-mode laser driven by both coloured pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts, and calculates the steady-state mean normalized intensity fluctuation and intensity correlation time. It analyses the influences of the modulation signal, the net gain coefficient, the noise and its correlation form on the statistical fluctuation of the laser system respectively. It is found that the coloured pump noise modulated by the signal has a great suppressing action on the statistical fluctuation of the laser system; the pump noise self-correlation time and the specific frequency of modulation signal have the result that the statistical fluctuation tends to zero. Furthermore, the ＇colour＇ correlation of pump noise has much influences on the statistical fluctuation of the laser system. Increasing the intensity of pump noise will augment the statistical fluctuation of the laser system, but the intensity of quantum noise and the coefficient of cross-correlation between its real and imaginary parts have less influence on the statistical fluctuation of the laser system. Therefore, from the conclusions of this paper the statistical property can be known and a theoretical basis for steady operation and output of the laser system can be provided.

Influence of Signal and Noise on Statistical Fluctuation of Single-Mode Laser System

On the basis of calculating the steady-state mean normalized intensity fluctuation of a signal-mode laser system driven by both colored pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts, we analyze the influence of modulation signal, noise, and its correlation form on the statistical fluctuation of the laser system. We have found that when the amplitude of modulation signal weakens and its frequency quickens, the statistical fluctuation will reduce rapidly. The by reducing the intensity of pump noise and quantum noise. statistical fluctuation of the laser system can be restrained Moreover, with prolonging of colored cross-correlation time, the statistical fluctuation of laser system experiences a repeated changing process, that is, from decreasing to augmenting, then to decreasing, and finally to augmenting again. With the decreasing of the value of cross-correlation coe~cient, the statistical fluctuation will decrease too. When the cross-correlation form between the real part and imaginary part of quantum noise is zero correlation, the statistical fluctuation of laser system has a minimum. Compared with the influence of intensity of pump noise, the influence of intensity of quantum noise on the statistical fluctuation is smaller.

Effecfs of Cross-Correlation Between Real Noise in Transient Process of Single-Mode and Imaginary Parts of Colored Pump Laser

A two-dimensional single-mode laser model with cross-correlation between the real and imaginary parts of the colored quadric pump noise is investigated. A novel laser amplitude Langevin equation is obtained, in which the cross-correlation λp between the real and imaginary parts of the pump noise appears. The mean, variance, and skewness of first-passage-time are calculated. It is shown that the mean, variance, and skewness of first-passage-time are strongly affected by λp.

Stable single-mode operation of 894.6 nm VCSEL at high temperatures for Cs atomic sensing

In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser（VCSEL）. The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios（SMSRs） are more than 30 dB with increasing temperature and current, respectively.

控制单模激光Haken-Lorenz系统混沌的一种有效方法

基于变量脉冲反馈法 (VPF)的设计思想 ,提出了一种控制非线性系统中混沌的新方法———变量变化率脉冲反馈 (VRPF)法 将此方法应用到单模激光Haken Lorenz系统混沌的控制中 ,计算机模拟结果表明 ,通过恰当地选择反馈系数和脉冲间隔 ,可以将系统稳定在 1p、2p、3p… 2 mp、3np以及 2 mp× 3np这样不同的周期轨道 。

利用单模激光Lorenz系统实现混沌反控制

利用Lyapunov函数方法,对混沌反控制问题进行了研究.以单模激光Lorenz系统和描述心脏搏动的Bonhoeffer-Van der Pol系统为例,设计了一种控制器,成功地使Bonhoeffer-Van der Pol系统混沌化.给出了控制器的具体设计方案以及单模激光Lorenz系统与Bonhoeffer-Van der Pol系统状态之间误差系统的结构.仿真结果表明,在控制器的作用下,Bonhoeffer-Van der Pol系统所有状态变量严格地跟踪了单模激光Lorenz系统的混沌轨迹,对应的相空间中Bonhoeffer-Vander Pol系统的轨迹也由极限环转变为与单模激光Lorenz系统的轨迹完全相同的混沌吸引子,Bonhoeffer-Van der Pol系统严格地跟踪了单模激光Lorenz系统混沌的动态行为.

利用单模激光Lorenz系统实现异结构混沌系统混沌同步

对混沌同步问题进行了研究。设计了一种同步控制器来实现异结构混沌系统之间的混沌同步。减少了控制器的数量,仅用一个控制器就能实现这一同步控制。同时,控制器只需在目标和响应系统中提取一个易提取信号即可实现,从而大大降低了同步代价,便于实际应用。以单模激光Lorenz系统和coullet系统为例,验证了这种控制器的有效性。仿真模拟结果表明,在控制器的作用下,coullet系统所有状态变量严格地跟踪了单模激光Lorenz系统的混沌轨迹,两者迅速地达到完全同步。该设计的控制方法可用于任意混沌系统,具有一定的普适性。

单模激光Lorenz系统反同步控制研究

提出了一种实现异结构混沌系统反同步控制的方法。根据Lyapunov稳定性理论给出控制器的结构。以单模激光Lorenz系统和Rossler系统为例,验证了这种控制器的有效性。进一步研究了不确定混沌系统的反同步,并以不确定单模激光Lorenz系统和Rossler系统为例,实现了混沌反同步控制,同时系统中不确定参数得到识别。仿真模拟结果验证了这种方法的有效性。设计的反同步控制方法可用于任意混沌系统,具有一定的普适性。

单模激光Lorenz系统与Duffing系统缩阶反同步

对于2阶Duffing系统与3阶单模激光Lorenz系统,用主动控制方法设计了一种同步控制器,实现二者之间的缩阶反同步。依据罗斯-霍维兹判据,给出误差系统在原点处渐进稳定的条件。数值试验证实:在控制器作用下,2阶Duffing系统的状态变量与3阶单模激光Lorenz投影子系统的状态变量振动的幅值相同但方向相反,且在随机噪声干扰下反同步仍能很好地实现。这表明所设计的控制器对于不同阶的Duffing系统与Lorenz系统的缩阶反同步的实现是可行的、有效的,而且具有很好的鲁棒性。

Lorenz系统驱动声光双稳时空混沌系统并行同步的研究

研究了一个时间混沌系统驱动多个时空混沌系统的并行同步问题.以单模激光Lorenz系统和一维耦合映像格子为例,在单模激光Lorenz系统中提取一个混沌序列,通过与一维耦合映像格子中的状态变量耦合使单模激光Lorenz系统和多个同结构一维耦合映像格子同时达到广义同步,并且多个一维耦合映像格子之间实现完全并行同步.通过计算条件Lyapunov指数,可以得到并行同步所需反馈系数的取值范围.数值模拟证明了此方法的可行性和有效性.

利用跟踪控制实现单模激光lorenz系统和新系统的混沌同步

分析了单模激光Lorenz系统和新系统的动力学特性。基于非线性反馈控制器的设计,利用跟踪控制使处于混沌和超混沌的两系统之间的拓扑不等价的异结构混沌系统成功地达到了混沌同步,依据线性稳定性理论分析,确定了控制系统的稳定性。数值模拟表明,通过适当地选择反馈增益系数,响应系统得到了有效控制。由于控制过程中无需计算Lyapunov指数,异结构混沌系统间的拓扑结构亦可以有较大差异,可降低混沌控制工作量和提高保密通信的性能。

打靶法实现Lorenz-Haken激光混沌的周期和稳态控制

用打靶法对Lorenz-Haken单模激光混沌模型进行控制。计算机模拟结果表明,实现了Lorenz-Haken激光系统的周期一、周期二、周期四等周期轨道控制和稳态控制。

单模激光Lorenz系统零动态控制耦合混沌同步

基于微分几何理论,提出了一个通过零动态控制实现同结构单模激光Lorenz系统的混沌同步控制方法。对于误差动力学系统,通过动态扩充相对阶和部分状态反馈线性化获得两个子系统,分别独立设计控制器形成复合控制。对于非最小相位系统和最小相位系统两种情形的模拟仿真,验证了方法的有效性,表明了对同类问题的适用性。