Model-free Speed Control of Single-phase Flux Switching Motor with an Asymmetrical Rotor

This paper proposes and implements a model-free open-loop iterative learning control(ILC)strategy to realize the speed control of the single-phase flux switching motor(FSM)with an asymmetrical rotor.Base on the proposed winding control method,the asymmetrical rotor enables the motor to generate continuous positive torque for positive rotation,and relatively small resistance torque for negative rotation.An initial iteration coefficient and variable iteration coefficient optimized scheme was proposed based on the characteristics of the hardware circuit,thereby forming the model-free strategy.A series of prototype experiments was carried out.Experimental results verify the effectiveness and practicability of the proposed ILC strategy.

高频链AC-DC矩阵变换器的变控制频率软开关调制策略

针对高频链AC-DC矩阵变换器的高效率要求,提出了一种变控制频率软开关调制策略。该调制策略在基于零矢量嵌入的分段同步控制策略基础上,以单控制周期平均功率不变为原则,通过改变控制周期长度,并调整一个控制周期内的电压矢量排布,优化脉冲宽度,使变换器在换流时全部开关器件的零电压开通成为可能。通过仿真分析和实验证明,采用本文提出的变控制频率调制策略,变换器在整流和逆变模式下,均可实现网侧电流三相平衡正弦,功率因数达到0.981,输出电压纹波小,最高效率达到96.9%,实现了高性能、高效率运行。

Industrial frequency single-phase AC traction power supply system for urban rail transit and its key technologies

To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.

HC-55 Single-Phase AC Series-Excitation Commutator Motor

The HC-55 single-phase AC series-excitation commutator motor exported to Japan by the Linquan Motor Factory is an open-type motor characterized by simple structure, small volume, high rotary speed, large starting torque, reliable operation and easy installation. It can be used as a driving component for various kinds of household electrical appliances, such as electric mills, pulverlizers, small stirrers, vacuum cleaners and electric hair dryers, an ideal product for electrical equipment.

基于单片机的AC-DC变换电路设计

传统的AC-DC变换电路由于要通过高频变压器来实现电压变换,存在效率较低、电源的波纹很难降低等问题。因此,设计一种以单片机为核心控制器件的新型单相AC-DC变换电路。单相AC-DC变换电路设计结合BOOST开关器、输入负反馈和脉冲宽度调制,采用单片机辅助控制相结合的方式实现闭环控制,保证输出的稳定和高效。该电路包括全波桥式整流电路、BOOST开关器、电压反馈电路、电流采样电路和功率因数测量电路,通过负反馈控制UC3845芯片来改变PWM控制信号,从而调整BOOST开关器开关的通断,使输出电压稳定在36 V。单相AC-DC变换电路具有PFC功能,可通过LCD将实时的PF值进行检测,显示输出电流、输出电压、功率因数等数据。另外,在输出端设计了过流保护报警功能,该设计选取STC51单片机系列中的89C52RC芯片作为控制核心,结合电流电压检测共同来实现。实验结果表明,实测负载调整率为0.28%,电压调整率为0.28%,功率因数为0.91,说明所设计电路优于传统的AC-DC变换电路,具有转换率高的特点。

一种新型可升降压四种模式AC/AC变换器

提出了一种新型具有四种模式的交流-交流变换器,该变换器在新模式输出波形上降低了谐波,提高了输出电压的质量,减小了电压的纹波,同时增加了新的工作模式。在新的工作模式下,该变换器具有原变换器只用两个开关管高频切换、减少了电能损失等优点,适用于特殊的场合。介绍了该变换器的工作原理和控制方式,对新模式的电感电容进行了推导,并在MATLAB/Simulink中仿真验证了其正确性。

Soft-switching Grid-connected PV Inverter With Interleaved Flyback Topology

提出一种应用于单个光伏组件的软开关交错反激并网逆变器拓扑及其软开关控制策略。针对反激变压器漏感问题，提出漏感能量吸收回馈电路，实现了漏感能量吸收再利用，并实现了开关管漏源电压的钳位，提高了变换效率同时降低了开关管关断电压尖峰；提出基于数字处理器的反激变换器变开关频率谐振软开关控制策略，实现了开关管的零电压开通，同时改善了逆变器的电磁兼容特性；提出的交错并联反激逆变器有助于减小变压器和滤波器的体积，提高功率密度。详细分析变换器的工作原理，分析变开关频率谐振软开关控制方式的原理和实现条件，最后进行实验验证。

基于扩展移相的隔离型AC-DC变换器零矢量PWM调制策略

传统隔离型双向AC-DC变换器多为两级式结构,变换器效率低、控制系统复杂,现有的单级式解决方案通常依赖大量实时计算,难以兼具低电流应力、宽软开关范围和高功率传输能力特性。为此,该文设计基于双有源全桥的新型单级隔离型双向AC-DC谐振变换器,提出一种含有零矢量的复合频率调制策略。从高频开关周期入手,利用数学推导,证明所提方案在实现自动功率因数校正功能的同时,可降低开关器件的开关频率,免除附加吸收电路,实现交直流全桥的软开关,且几乎无功率回流,从而有效提升变换器的功率传输能力,所提单变量调节方法简化控制系统设计。最后,搭建额定功率为450W的仿真和实验平台,证明理论分析的正确性和调制策略的可行性。

A new high-performance AC/DC power factor correction switching converter based on one-cycle control technology and active floating-charge technology

A new family of converters,high-performance AC/DC power factor correction(PFC) switching converters with one-cycle control technology and active floating-charge technology,was derived and experimentally verified.The topology of a single-phase CCM and DCM Boost-PFC switching converter was also analyzed.Its operating prniciples and control methods were expounded.Based on these,a new type of AC/DC switching converter circuits for PFC combined with one-cycle control technology was presented herein.The proposed AC/DC switching converter significantly helps improve the converter efficiency and its power factor value.

Computer Aided Analysis ofAC Drive System with Soft Switching Inverter

The design of a general simulation package for AC drive system with soft switching inverter is discussed in this paper. This package is based on the secondary developing of the nonlinear control system simulation language SIMNON. Being constructed with modularization programming, the package can be used for general purposes conveuieutly and has strong graphic functions. The design principle for this simulation package is discussed in datail in this peper; and an application example (DSC controlled AC drive system with RDCLI) as well as its simulation results are given.

Fabrication of automatic switch for AC-DC completely automated measurement system at NIS

A fast automatic AC-DC switch is designed and fabricated mainly by a microcontroller and three double poles single throw reed relays.This new switch is introduced to establish a fully automated system for AC-DC measurements through ACDC transfer standards for the first time at the National Institute for standards(N IS)in Egypt.The implemented circuit of theautomatic AC-DC switch and its protection are presented in details.An AC voltage source is calibrated against DC voltagesource by using the demonstrated automatic switch as an application The calibrated voltage ranges are2V,6V,20V and60V as examples.The uncertainty budget is also evaluated for the calibrated values.

一种新型单级隔离型AC-DC变换器研究

文中提出一种新型单级式隔离AC-DC变换器及控制方案。所提结构在不改变图腾柱无桥功率因数校正(totem pole bridge-free power factor correction,TP-PFC)和双向全桥(dual active bridge,DAB)两级式AC-DC变换器特性的前提下,将TP-PFC高频桥臂和DAB原边侧第一个桥臂进行开关复用,减小了开关器件数目。同时,相较于TP-PFC和DAB两级式AC-DC变换器,取消了直流母线电解电容并且抑制了交流电感电流尖峰。利用其拓扑特点及所提出的控制方案,实现了拓扑开关器件的全范围软开关。首先详细分析所提拓扑结构的工作特性,包括工作模态、拓扑优点、功率特性及软开关特性;其次基于对拓扑的分析,提出控制简单的控制策略;最后,对所提拓扑结构及控制方案进行实验验证。

Analysis of Soft-Switched High Frequency AC-AC Converter for Induction Motor Drive

The systematic mathematical analysis of the high frequency soft-switched AC-AC converter is proposed for variable frequency induction machine load in this paper. Both PWM and square-wave modes of operation have been considered. The frequency relation and phase unbalance problem due to discrete time integral half-cycle switching has been discussed in the beginning. Then, generalized Fourier series have been derived for output voltage, output current and supply current in two modes.The analytical results help to understand tbe converter characteristics, design optimally a convertermachine system of arbitrary capacity considering the various trade-off parameters.

LIMITATION OF SOFT-SWITCHING TECHNIQUE IN AC/DC POWER CONVERTER'S EFFICIENCY IMPROVEMENT

Soft-switching techniques are attractive to unity-power-factor AC/DC converter in the view of the size reduction and EMI suppression. A soft-switched boost PFC converter has been studied based on its topology analysis, PSIM simulation and circuit experiment. A special limitation of soft-switching techniques has been found in their AC/DC applications.

基于移相和调频的单级双向AC-DC变换器临界电流调制策略

传统双有源桥单级AC-DC变换器的移相调制难以实现全范围软开关,开关管损耗大,效率难以进一步提高。针对此问题,该文提出一种基于临界电流模式(BCM)的调制策略,将移相和调频相结合,实现所有开关管的零电压开通,从而有效地降低了开通损耗。该文分析单级式双向AC-DC变换器的临界电流调制基本原理和软开关实现条件,并推导出软开关条件下的移相和频率数学表达式。搭建DC 48 V、AC 220 V、500 W实验样机,最高效率达到94%,通过实验验证该调制策略的有效性和正确性。

Development and Static Mode Characterization of a New Low-Loss AC Switch Based on Super-gain BJT

This paper deals with an innovative low-loss AC switch, named as TBBS （transistor based bidirectional switch）, based on the association of super-gain BJTs developed by the GREMAN laboratory. The main characterization results of the super-gain BJT are reminded to identify the key parameters that are essential to build the TBBS. A complete characterization database in static mode of this new AC switch is discussed. In particular, its forward and reverse-biased features have been measured to see the evolution of the DC current gain as a function of the current density. The TBBS makes sense when using the super-gain BJT （bipolar junction transistor） in reverse mode. It means that the reverse DC current gain has to be sufficient （at least higher than l compared with the conventional BJT one）. This new AC switch is bidirectional in current and voltage, totally controllable （turn-on and turn-off） and the most attractive solution in terms of on-state power losses. Further, its manufacturing process is as easier as existing device such as triac.

基于单级AC/DC脉冲激励源的电容式无线输电系统

电容式无线输电(CPT)系统的原边激励源通常是由工频整流器和高频逆变器组成的级联变换器,使用的半导体和无源元件数量较多,导通损耗也较高。该文提出了一种新型的单级AC/DC变换器,与传统的变换器相比,该变换器只使用2个开关管和2个二极管,可以将工频交流电变换成CPT系统所需的直流脉冲激励源。该文介绍了该变换器的工作原理,提出了实现高功率因数、软开关的设计方法。最后,通过硬件实验证明了该变换器在电容式无线输电系统中的可行性,实现了开关管的零电压导通,具有高输入功率因数。

励磁系统交流侧接地对转子接地保护的影响

励磁系统交流侧接地将引起注入式转子接地保护、乒乓切换式转子接地保护误动作。本文介绍了一起相关案例,并对引起误动的基本原理进行了深入分析和定量计算,总结了励磁系统交流侧接地引起采样数据变化的典型特征,提出了关于缩小转子接地保护定位范围的思考。当转子一点接地保护动作后,应首先根据采样数据的变化,对故障点位于励磁系统交流侧还是直流侧做出初步判断,缩小故障定位范围,为快速查找故障提供决策依据。

远距离交流转辙机道岔控制电路轨旁设置方案研究

针对三相交流转辙机道岔控制电缆间分布式电容值随道岔控制距离变长而增大,电容累积导致道岔表示电路室外X1断线,引发表示继电器无法落下故障的问题,通过分析得出线缆传输距离是影响电缆间分布式电容值的主要因素,提出将远距离交流转辙机道岔控制电路移设于轨旁控制箱的方案,以达到缩短道岔控制电缆长度,消除道岔表示电路受电缆间分布电容耦合作用带来不利影响的目的,确保道岔控制电路的正确性和准确性。该方案一方面相较于设置独立线路所,可大大降低建设成本;另一方面,道岔控制电路维持现有五线制道岔控制原理,轨旁控制箱技术条件和安装方式参考成熟的远程地面电子单元等室外控制设备,符合安全适应、先进成熟、经济合理的信号设计原则。研究结果表明,该方案可在工程中优先采用。