A comparative single-pulse shock tube experiment and kinetic modeling study on pyrolysis of cyclohexane,methylcyclohexane and ethylcyclohexane

The pyrolysis of cyclohexane,methylcyclohexane,and ethylcyclohexane have been studied behind reflected shock waves at pressures of 5 and10 bar and at temperatures of 930-1550 K for 0.05%fuel diluted by Argon.A single-pulse shock tube(SPST)is used to perform the pyrolysis experiments at reaction times varying from 1.65 to 1.74 ms.Major products are obtained and quantified using gas chromatography analysis.A flame ionization detector and a thermal conductivity detector are used for species identification and quantification.Kinetic modeling has been performed using several detailed and lumped chemical kinetic mechanisms.Differences in modeling results among the kinetic models are described.Reaction path analysis and sensitivity analysis are performed to determine the important reactions controlling fuel pyrolysis and their influence on the predicted concentrations of reactant and product species profiles.The present work provides new fundamental knowledge in understating pyrolysis characteristics of cyclohexane compounds and additional data set for detailed kinetic mechanism development.

Improving control effects of absence seizures using single-pulse alternately resetting stimulation (SARS) of corticothalamic circuit

Presently,we develop a simplified corticothalamic(SCT)model and propose a single-pulse alternately resetting stimulation(SARS)with sequentially applying anodic(A,“+”)or cathodic(C,“−”)phase pulses to the thalamic reticular(RE)nuclei,thalamus-cortex(TC)relay nuclei,and cortical excitatory(EX)neurons,respectively.Abatement effects of ACC-SARS of RE,TC,and EX for the 2 Hz-4 Hz spike and wave discharges(SWD)of absence seizures are then concerned.The m∶n on-off ACC-SARS protocol is shown to effectively reduce the SWD with the least current consumption.In particular,when its frequency is out of the 2 Hz-4 Hz SWD dominant rhythm,the desired seizure abatements can be obtained,which can be further improved by our proposed directional steering(DS)stimulation.The dynamical explanations for the SARS induced seizure abatements are lastly given by calculating the averaged mean firing rate(AMFR)of neurons and triggering averaged mean firing rates(TAMFRs)of 2 Hz-4 Hz SWD.

Comparison on Morphological and Optical Properties of TiO_(2) Thin Films Grown by Single-Pulse and Multi-Pulse Laser Ablation

TiO2 thin films were prepared on glass substrates using the PLD (Pulsed Laser Deposition) technique. In order to carry out the ablation process, a Nd:YAG laser was used emitting in 1064 nm wavelength at 10 Hz repetition rate, set up for operating in both single-pulse and multi-pulse regimes. A comparison of the deposition rate, the optical and morphological properties of the layers obtained from both ablation regimes was made, which showed that the multi-pulsed ablation produced layers with a higher surface quality and better optical properties.

Single-pulse chaotic dynamics of functionally graded materials plate

Single-pulse chaos are studied for a functionally graded materials rectangular plate. By means of the global perturbation method, explicit conditions for the existence of a SiZnikov-type homoclinic orbit are obtained for this sys- tem, which suggests that chaos are likely to take place. Then, numerical simulations are given to test the analytical predic- tions. And from our analysis, when the chaotic motion oc- curs, there are a quasi-period motion in a two-dimensional subspace and chaos in another two-dimensional supplemen- tary subspace.

Simulation of temperature distribution and discharge crater of SiC_(p)/Al composites in a single-pulsed arc discharge

SiC_(p)/Al composites are difficult-to-cut materials.In recent years,electrical arc discharge machining has been developed to improve the machinability of these materials.However,there is a big challenge to build a satisfactory heat transfer model of SiC_(p)/Al composites in the arc machining.This is not only because of the material property difference between the reinforcement and matrix material but also because of the micro-dimension Si C reinforcements.This paper established a new heat conduction simulation model considering the Si C particle-Al matrix interface and the phase change effects in a single-pulsed arc discharge of SiC_(p)/Al composites.A novel Si C particle-Al matrix cell geometric model was designed firstly.Then,the temperature distribution at a different depth from the workpiece surface was analyzed,the influence of sic volume fraction on temperature field was studied,and the contribution of the interface thermal resistance and latent heat were explained.To demonstrate the validity of the new numerical model,comparisons and verifications were employed.Finally,the method of improving the model was proposed and the machining mechanism of arc discharge of SiC_(p)/Al matrix materials was discussed.It was found that high temperature is prone to concentrate on the surface layers of the workpiece especially when the Si C fraction is high,also,the temperature fluctuates respectively at the evaporation point of aluminum and Si C,and the Si C-Al resistance has less influence on temperature distribution compared to latent heat,etc.The model build in this work improves the simulation accuracy observably compared to the previous model,and the simulation work will help to acquire a detailed mechanism of material removal of SiC_(p)/Al composites in the arc discharge machining.

Fast X-ray imaging beamline at SSRF

The fast X-ray imaging beamline(BL16U2)at Shanghai Synchrotron Radiation Facility(SSRF)is a new beamline that provides X-ray micro-imaging capabilities across a wide range of time scales,spanning from 100 ps toμs and ms.This beamline has been specifically designed to facilitate the investigation of a wide range of rapid phenomena,such as the deformation and failure of materials subjected to intense dynamic loads.In addition,it enables the study of high-pressure and high-speed fuel spray processes in automotive engines.The light source of this beamline is a cryogenic permanent magnet undulator(CPMU)that is cooled by liquid nitrogen.This CPMU can generate X-ray photons within an energy range of 8.7-30 keV.The beamline offers two modes of operation:monochromatic beam mode with a liquid nitrogen-cooled double-crystal monochromator(DCM)and pink beam mode with the first crystal of the DCM out of the beam path.Four X-ray imaging methods were implemented in BL16U2:single-pulse ultrafast X-ray imaging,microsecond-resolved X-ray dynamic imaging,millisecond-resolved X-ray dynamic micro-CT,and high-resolution quantitative micro-CT.Furthermore,BL16U2 is equipped with various in situ impact loading systems,such as a split Hopkinson bar system,light gas gun,and fuel spray chamber.Following the completion of the final commissioning in 2021 and subsequent trial operations in 2022,the beamline has been officially available to users from 2023.