Continuous Separation of Multiple Size Microparticles using Alternating Current Dielectrophoresis in Microfluidic Device with Acupuncture Needle Electrodes

The need to continuously separate multiple microparticles is required for the recent development of lab-on-chip technology. Dielectrophoresis（DEP）-based separation device is extensively used in kinds of microfluidic applications. However, such conventional DEP-based device is relatively complicated and difficult for fabrication. A concise microfluidic device is presented for effective continuous separation of multiple size particle mixtures. A pair of acupuncture needle electrodes are creatively employed and embedded in a PDMS（poly-dimethylsiloxane） hurdle for generating non-uniform electric field thereby achieving a continuous DEP separation. The separation mechanism is that the incoming particle samples with different sizes experience different negative DEP（n DEP） forces and then they can be transported into different downstream outlets. The DEP characterizations of particles are calculated, and their trajectories are numerically predicted by considering the combined action of the incoming laminar flow and the n DEP force field for guiding the separation experiments. The device performance is verified by successfully separating a three-sized particle mixture, including polystyrene microspheres with diameters of 3 μm, 10 μm and 25 μm. The separation purity is below 70% when the flow rate ratio is less than 3.5 or more than 5.1, while the separation purity can be up to more than 90% when the flow rate ratio is between 3.5 and 5.1 and meanwhile ensure the voltage output falls in between 120 V and 150 V. Such simple DEP-based separation device has extensive applications in future microfluidic systems.

Size Depending Separation of HAP:Eu Nanoparticles in Dispersed Sol

The panicle size has a strong impact on the interactions between nanoparticles and cells. However, the synthesis process of nanoparticles limits the range of achievable average panicle sizes. When biocompatible hydroxyapatite nanoparticles （HAP） are doped with the luminescent rare earth elemeat Europium （Eu）, the panicle size becomes larger compared to pure HAP. Hence, a panicle size reduction is necessary to achieve similar experimental conditions when stbstituting pure HAP with luminescent HAP ： Eu nanoparticles to investigate particlecell-interactions in cell culture experiments. While the sedimentation process of particles in liquids and gels has been well described in literature, the separation of particles in dispersed colloids has not been studied, yet. In this study, the size depending separation and particle size redaction of a homogeneous dispersed nanoparticle sol by gravity and centrifugation were investigated. As the results showed, shorter time of centrifugation at higher speed can reduce the average particle size compared to the decline of the panicle concentation in the upper sol layer most efficiently. This ceatrifugation method has some similarity to the overspeeding technique which is commonly used to lower the transient time to reach the equilibrium of sedimentation.

A Comparison Study of Synkinematic Illite Isolation,Quantitative X-ray Powder Diffraction,and K-Ar Dating for Direct Fault Gouge Analyses

K-Ar dating of synkinematic illite is increasingly recognized as a central method to constrain the timing of shallow crustal faulting.Methods of efficient sample preparation and quantitative identification of illite polytypes are critical to acquiring K-Ar isotope data for authigenic clays.In this respect,we compared the commonly used clay size separation method through centrifugation with vacuum filtration technology,showing that the former is prone to extract fractions with finer particle sizes under similar conditions,thus improving the error in the authigenic end-member age.Additionally,we demonstrated that the side-packed mounting method for X-ray diffraction analysis can significantly enhance the randomness in powder samples,thus improving the quantification accuracy compared with the front-packed and back-packed methods.The validity of our quantification method was confirmed by comparing Profex■modeling patterns with a suite of synthetic mixtures of known compositions,yielding an average analytical error of 3%.Dating results of these artificial mixtures and the reference materials indicated that a large range in percentages of detrital illite and a sufficient amount of age data will produce reliable results for ages of both extrapolated end-members.However,if the range is limited,the extrapolated age close to those of datasets is still reliable.

Nano-Graphene Oxide for Cellular Imaging and Drug Delivery

Two-dimensional graphene offers interesting electronic,thermal,and mechanical properties that are currently being explored for advanced electronics,membranes,and composites.Here we synthesize and explore the biological applications of nano-graphene oxide(NGO),i.e.,single-layer graphene oxide sheets down to a few nanometers in lateral width.We develop functionalization chemistry in order to impart solubility and compatibility of NGO in biological environments.We obtain size separated pegylated NGO sheets that are soluble in buffers and serum without agglomeration.The NGO sheets are found to be photoluminescent in the visible and infrared regions.The intrinsic photoluminescence(PL)of NGO is used for live cell imaging in the near-infrared(NIR)with little background.We found that simple physisorption viaπ-stacking can be used for loading doxorubicin,a widely used cancer drug onto NGO functionalized with antibody for selective killing of cancer cells in vitro.Owing to its small size,intrinsic optical properties,large specifi c surface area,low cost,and useful non-covalent interactions with aromatic drug molecules,NGO is a promising new material for biological and medical applications.