The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure....The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure. Traditional SEN can not decrease the surface turbulence and penetration depth at the same time, especially at high casting speed. In order to improve the fluid flow in the mould, a new structure SEN-Dissipation SEN have been invented. The water modeling experiments proved that the dissipation SEN could satisfy, the needs of fluid flow condition in the mould at high casting speed.展开更多
On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company...On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company of ThyssenKrupp Stainless group. The new caster is designed for a total capacity of approx.900.000 tpy of stainless steel slabs covering the complete range of stainless grades,including AISI 300 and 400 families(austenitic,ferritic and martensitic grades).This state of the art caster for the production of 215 mm thick slabs replaced an existing thin slab caster. This paper resumes the reasons of the installation of the new plant designed,manufactured erected and commissioned by Danieli and describes the technological solution,main features as well as the excellent results of this state of the art caster.展开更多
The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stir...The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.展开更多
A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model.During the simulation,the fixed-grid enthalpy-por...A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model.During the simulation,the fixed-grid enthalpy-porosity technique was used to represent the solidification,and Darcy law was adopted to simulate the flow in mushy region.The prediction for steel flow and solidification was evaluated by the comparison of two turbulence models.It is found that both Lam-Bremhorst low-Reynolds-number and high-Reynolds-number k-ε models predict the same trend of the steel flow and temperature distribution.However,due to the effect of turbulent flow on heat transfer,the low-Reynolds-number turbulence model predicts longer penetration depth of molten steel in sub-mold region,less shell growth and higher shell surface temperature at the narrow face compared with standard k-ε model.展开更多
A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model. During the simulation, the fixed-grid enthalpy-p...A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model. During the simulation, the fixed-grid enthalpy-porosity technique was used to represent the solidification, and Darcy law was adopted to simulate the flow in mushy region. The prediction for steel flow and solidification was evaluated by the comparison of two turbulence models. It is found that both Lam-Bremhorst low-Reynolds-number and high-Reynolds-number k-ε models predict the same trend of the steel flow and temperature distribution. However, due to the effect of turbulent flow on heat transfer, the low-Reynolds-number turbulence model predicts longer penetration depth of molten steel in sub-mold region, less shell growth and higher shell surface temperature at the narrow face compared with standard k-ε model.展开更多
文摘The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure. Traditional SEN can not decrease the surface turbulence and penetration depth at the same time, especially at high casting speed. In order to improve the fluid flow in the mould, a new structure SEN-Dissipation SEN have been invented. The water modeling experiments proved that the dissipation SEN could satisfy, the needs of fluid flow condition in the mould at high casting speed.
文摘On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company of ThyssenKrupp Stainless group. The new caster is designed for a total capacity of approx.900.000 tpy of stainless steel slabs covering the complete range of stainless grades,including AISI 300 and 400 families(austenitic,ferritic and martensitic grades).This state of the art caster for the production of 215 mm thick slabs replaced an existing thin slab caster. This paper resumes the reasons of the installation of the new plant designed,manufactured erected and commissioned by Danieli and describes the technological solution,main features as well as the excellent results of this state of the art caster.
文摘The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.
文摘A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model.During the simulation,the fixed-grid enthalpy-porosity technique was used to represent the solidification,and Darcy law was adopted to simulate the flow in mushy region.The prediction for steel flow and solidification was evaluated by the comparison of two turbulence models.It is found that both Lam-Bremhorst low-Reynolds-number and high-Reynolds-number k-ε models predict the same trend of the steel flow and temperature distribution.However,due to the effect of turbulent flow on heat transfer,the low-Reynolds-number turbulence model predicts longer penetration depth of molten steel in sub-mold region,less shell growth and higher shell surface temperature at the narrow face compared with standard k-ε model.
文摘A steady three-dimensional fluid flow and solidification model was built based on CFD software by high-Reynolds-number and Lam-Bremhorst low-Reynolds-number k-ε model. During the simulation, the fixed-grid enthalpy-porosity technique was used to represent the solidification, and Darcy law was adopted to simulate the flow in mushy region. The prediction for steel flow and solidification was evaluated by the comparison of two turbulence models. It is found that both Lam-Bremhorst low-Reynolds-number and high-Reynolds-number k-ε models predict the same trend of the steel flow and temperature distribution. However, due to the effect of turbulent flow on heat transfer, the low-Reynolds-number turbulence model predicts longer penetration depth of molten steel in sub-mold region, less shell growth and higher shell surface temperature at the narrow face compared with standard k-ε model.
