Tunable magnomechanically induced transparency and fast-slow light in a hybrid cavity magnomechanical system

We theoretically explore the tunability of magnomechanically induced transparency(MMIT) phenomenon and fastslow light effect in a hybrid cavity magnomechanical system in which a high-quality yttrium iron garnet(YIG) sphere and an atomic ensemble are placed inside a microwave cavity. In the probe output spectrum, we can observe magnoninduced transparency(MIT) and MMIT due to the photon-magnon and phonon-magnon couplings. We further investigate the effect of atomic ensemble on the absorption spectrum. The results show that better transparency can be obtained by choosing appropriate atomic ensemble parameters. We give an explicit explanation for the mechanism of the Fano resonance phenomenon. Moreover, we discuss phenomena of slow-light propagation. The maximum group delay increases significantly with the increasing atom–cavity coupling strength, and the conversion between slow light and fast light can also be achieved by adjusting the atom–cavity coupling strength. These results may have potential applications for quantum information processing and high precision measurements.

Vacuum induced transparency and slow light phenomena in a two-level atomic ensemble controlled by a cavity

We study the optical properties of a two-level atomic ensemble controlled by a high-finesse cavity. Even though the cavity is initially in the vacuum state in the absence of external driving, the probe response of the atomic ensemble can be dramatically modified. When the collectively enhanced atom–cavity coupling is strong enough and the cavity decay rate is much smaller than the atomic damping rate, an electromagnetically induced transparency-like coherent phenomenon emerges with a dip absorption for the response of the two-level atoms in the cavity without driving, and thus is called vacuum induced transparency. We also show the slow light with very low group velocity in such an atomic ensemble.

Tunable optomechanically induced transparency and fast-slow light in a loop-coupled optomechanical system

We theoretically explore the tunability of optomechanically induced transparency(OMIT)phenomenon and fast-slow light effect in a loop-coupled hybrid optomechanical system in which two optical modes are coupled to a common mechanical mode.In the probe output spectrum,we find that the interference phenomena OMIT caused by the optomechanical interactions and the normal mode splitting(NMS)induced by the strong tunnel coupling between the cavities can be observed.We further observe that the tunnel interaction will affect the distance and the heights of the sideband absorption peaks.The results also show that the switch from absorption to amplification can be realized by tuning the driving strength because of the existence of stability condition.Except from modulating the tunnel interaction,the conversion between slow light and fast light also can be achieved by adjusting the optomechanical interaction in the output field.This study may provide a potential application in the fields of high precision measurement and quantum information processing.

Analysis and Investigation of Slow Light Based on Plasmonic Induced Transparency in Metal-Dielectric-Metal Ring Resonator in a Waveguide System with Different Geometrical Designs

In this paper we will try to create, propose and analyze structure of a slow light device, based on plasmonic induced transparency in a metal-dielectric-metal based ring resonator. Group index by first design about 37 and second design about 35 earned. The proposed dielectric material is Poly Methyl Meta Acrylate (PMMA) sandwiched by gold metal cladding. Finite Element Method-con- ducted Electromagnetic simulations are employed to evaluate the plasmonic designs for behavior of slow light. The signal and pump wavelength are assumed to be 830 nm and 1550 nm respectively in the systems. The overall length of the plasmonic slow light system is 600 nm. In a wide range of frequency bands, the optical properties of metals can be described with a plasma model. The optical signal can be achieved with the use of surface waves on the boundary between the insulating materials and metals with dimensions smaller than the diffraction limit. The main goal, is estimation of optical characteristics such as bandwidth, the Real and Imaginary parts of refractive index, group velocity and slow down factor in such optical devices. The obtained results and observations, can be useful in basic research and the production of highly integrated plasmonic devices.

Control of slow light in a ring-out-ring structure

This paper proposes a ring-out-ring structure of coupled optical resonators to yield coupled-resonator-induced transparency （CRIT）. Considering the insertion loss of the coupler, it theoretically deduces the transmission and the effective phase shift. The influences of the insertion loss of the coupler on the transmittance, the effective phase shift, the group index and the CRIT linewidth are fully studied. We find that the increase in multiple m can effectively enhance the normal dispersion and the group index of the proposed structure. Moreover, the specific expression of the group index at resonance is theoretically deduced and discussed for the proposed structure with two rings. The result shows that the multiple m between the lengths of ring 1 and ring 2 can enhance the group index to m times that of the structure with two equal-sized rings at resonance. The control of slow light in the proposed structure is important for applications of highly sensitivity gyroscopes, optical delay lines and optical buffers, etc.

Image information transfer via electromagnetically induced transparency-based slow light

In this work, we experimentally demonstrate an image information transfer between two channels by using slow light based on electromagnetically induced transparency（EIT） in a solid. The probe optical image is slowed due to steep dispersion induced by EIT. By applying an additional control field to an EIT-driven medium, the slowed image is transferred into two information channels. Image intensities between two information channels can be controlled by adjusting the intensities of the control fields. The similarity of output images is further analyzed. This image information transfer allows for manipulating images in a controlled fashion, and will be important in further information processing.

Multi-window transparency and fast–slow light switching in a quadratically coupled optomechanical system assisted with three-level atoms

We study theoretically the features of the output field of a quadratically coupled optomechanical system assisted with three-level atoms. In this system, the atoms interact with the cavity field and are driven by a classical field, and the cavity is driven by a strong coupling field and a weak signal field. We find that there exists a multi-window transparency phenomenon. The width of the transparent windows can be adjusted by controlling the system parameters, including the number of the atoms, the powers of the lasers driving the atoms and driving the cavity, and the environment temperature. We also find that a tunable switch from fast light to slow light can be realized in this system.

Generation and storage of double slow light pulses in a solid

We experimentally study the generation and storage of double slow light pulses in a pr^3＋：Y2SiO5 crystal. Under electromagnetically induced transparency, a single signal pulse is stored in the spin coherence of the crystal. By simultaneously switching on two control fields to recall the stored information, the spin coherence is converted into two slow light pulses with distinct frequencies. Furthermore, the storage and controlled retrieval of double slow light pulses are obtained by manipulating the control fields. This study of double slow light pulses may have practical applications in information processing and all-optical networks.

Absorption and slow light effect of pulsed light in a triple semiconductor quantum well

Under the condition of two different cases, the absorption of a pulsed probe field and its slow propagation in a triple semiconductor quantum well are investigated. The result shows that semiconductor medium becomes transparent due to the action of control field. Another result shows that by choosing appropriate physical parameters, the slow propagation of the input field can be achieved. The proposed scheme has some potential applications and may lead to the development of the controlled technique of optical buffers and optical delay lines.

An ultrafast and low-power slow light tuning mechanism for compact aperture-coupled disk resonators

An ultrafast and low-power slow light tuning mechanism based on plasmon-induced transparency(PIT)for two disk cavities aperture-coupled to a metal-dielectric-metal plasmonic waveguide system is investigated numerically and analytically.The optical Kerr effect is enhanced by the local electromagnetic field of surface plasmon polaritons,slow light,and graphene-Ag composite material structures with a large effective Kerr nonlinear coefficient.Through the dynamic adjustment of the frequency of the disk nanocavity,the group velocity is controlled between c/53.2 and c/15.1 with the pump light intensity increased from 0.41 MW/cm^2 to 2.05 MW/cm^2.Alternatively,through the dynamic adjustment of the propagation phase of the plasmonic waveguide,the group velocity is controlled between c/2.8 and c/14.8 with the pump light intensity increased from 5.88 MW/cm^2 to 11.76 MW/cm^2.The phase shift multiplication of the PIT effect is observed.Calculation results indicate that the entire structure is ultracompact and has a footprint of less than 0.8μm^2.An ultrafast responsive time in the order of 1 ps is reached due to the ultrafast carrier relaxation dynamics of graphene.All findings are comprehensively analyzed through finite-difference time-domain simulations and with a coupling-mode equation system.The results can serve as a reference for the design and fabrication of nanoscale integration photonic devices with low power consumption and ultrafast nonlinear responses.

Simulation and Characteristics Improvement of Quantum Dot Slow Light Devices by Geometrical Dimension Alteration

In this paper we simulate and analyze a sample of slow light semiconducting device with quantum dot structure based on coherent population oscillation (CPO). The simulation is conducted to enhance the main parameters of slow light device and a method is presented for setting the output specifications of this kind of devices. In this paper, we deal with changing the size of quantum dot to find the ideal size. The simulation results indicate that as the size of quantum dot changes properly (with reducing more than 50 percent of quantum dots both radius and height), then the slope of diagram of the real part of refractive index increases significantly so that the Slow Down Factor (SDF) predicted to be18 times greater. Analysis and simulations based on cylinderical quantum dots structure slow light devices based on exitonic cpo.

Low-Loss Slow Light Transmission in Photonic Crystal Waveguides Comprising of Liquid Crystal Infiltration

A low loss photonic crystal （PhC） waveguide having rectangular air holes in Si core is proposed having an average group index of 55 in the bandwidth of 1.2 THz. The possible propagation losses due to inefficient coupling arc also investigated for proposed structure. It is found that high transmission is obtained for a broad bandwidth from the output of the finally designed heterogeneous waveguide consisting of a slow liquid crystal infiltrated PhC waveguide surrounded by fast PhC waveguides on both sides.

Slow light via four-wave mixing in a hot rubidium vapour

In this work, we report on an off-resonant four-wave mixing experiment via a ladder-type configuration in a hot rubidium atomic vapour. We find for the first time, to the best of our knowledge, that the generated light is delayed compared with the reference. At the same time, the seeded signal beam is also delayed, though the delay time is not as so large as the one that the generated light has. Both delayed times can be adjusted experimentally by controlling the two-photon detuning. The experimental results are in good agreement with our theoretical predictions. Our results may be important for storing telecom-band photons.

Effects of Quantum well Size Alteration on Excitonic Population Oscillation Slow Light Devices Properties

This paper investigates the effects of quantum well size changes on center frequency and slow down factor of an slow light device. In this way, we consider the quantum well size alteration effects on oscillator strength and binding energy of exciton. First, we investigate the variations in oscillator strength of exciton due to different quantum well size. Second, exciton binding energy level shift due to size of quantum well is investigated. According to this analysis, we have developed a new method for tuning slow light device bandwidth center frequency and slow down factor. Analysis and simulation of a basic GaAs/AlGaAs quantum wells optical slow light device based on excitonic population oscillation shows that size of quantum wells could tune both of the frequency properties and slow down factor of an optical slow light device. In our simulation with 34 quantum wells each with the width of 60?, we have received the slow down factor of more than 60,000. These achievements are useful in optical nonlinearity enhancements, all-optical signal processing applications and optical communications.

Ultrafast control of slow light in THz electromagnetically induced transparency metasurfaces

In this paper,we experimentally demonstrate ultrafast optical control of slow light in the terahertz(THz) range by combining the electromagnetically induced transparency(EIT) metasurfaces with the cut wire made of P+-implanted silicon with short carrier lifetime.Employing the optical-pump THz-probe spectroscopy,we observed that the device transited from a state with a slow light effect to a state without a slow light effect in an ultrafast time of 5 ps and recovered within 200 ps.A coupled oscillator model is utilized to explain the origin of controllability.The experimental results agree very well with the simulated and theoretical results.These EIT metasurfaces have the potential to be used as an ultrafast THz optical delay device.

Enhanced slow light propagation in photonic crystal waveguides using angular properties of scatter elements

Applicability of the angular properties of scatter elements as a tool to achieve improved slow light per- formance with small group velocity dispersion and large bandwidth in photonic crystal waveguides is investigated. A polyatomic photonic crystal waveguide, including two scatter elements with different geo- metrical shapes in each primitive cell, is proposed to investigate the feasibility of our method. Numerical results show that a versatile control of the dispersion relation of slow light modes, with large normalized delay-bandwidth products ranging from 0.2085 to 0.3394, can be obtained using a unique geometrical pa- rameter.

Ultra-compact variable optical attenuator based on slow light photonic crystal waveguide

An ultra-compact variable optical attenuator based on slow light photonic crystal waveguide with thermo- optic effect is demonstrated. Along with power consumption of as low as 30.7 roW, a variable attenuation range of 10 dB is experimentally achieved by shifting the transmission spectrum at about 4.6 nm. The length of the ProPosed device is only 20 μm.

Hybrid silicon slotted photonic crystal waveguides:how does third order nonlinear performance scale with slow light?

We investigate in this paper the influence of slow light on the balance between the Kerr and two-photon absorption(TPA) processes in silicon slotted hybrid nonlinear waveguides. Three typical silicon photonic waveguide geometries are studied to estimate the influence of the light slow-down factor on the mode field overlap with the silicon region, as well as on the complex effective nonlinear susceptibility. It is found that slotted photonic crystal modes tend to focalize in their hollow core with increasing group index(n_G) values. Considering a hybrid integration of nonlinear polymers in such slotted waveguides, a relative decrease of the TPA process by more factor of 2 is predicted from n_G=10 to n_G=50. As a whole, this work shows that the relative influence of TPA decreases for slotted waveguides operating in the slow light regime, making them a suitable platform for third-order nonlinear optics.

Improvement of slow light performance for vertical-cavity surface-emitting laser using coupled cavity structure

We propose a vertical cavity semiconductor emitting laser(VCSEL)using a coupled-cavity(CC)design to broaden the bandwidths of gain and delay spectra.The structure is formed by constructing a passive cavity coupled with the active cavity.By rendering the strength of the two resonant cavities,the increased gain bandwidth by 340%and the increased delay bandwidth by 800%are achieved as compared with the signal-cavity(SC)VCSEL.The wideband spectra present more square-like passband which is expected for slow light system.By using it,a 20 Gbit/s super Gaussian signal is delayed by about 13 ps with high quality.

An optical rotation sensor based on dispersive slow-light medium

Slow light supported by electromagnetically induced transparency effect in dispersive medium is extremely susceptible with respect to Doppler detuning. In this paper, the Doppler effect induced by rotating dispersive medium was considered and the effect of the velocity of rotating dispersive medium on the group velocity was studied. Based on a dispersive slow-light medium, a high sensitive optical rotation sensor for measuring absolute rotation is proposed and analysed. The sensitivity of the rotation sensor is the group delay between the counterpropagationed wave packets in the device, and scales directly with square of the group index which can reach 102-10s orders of magnitude by selecting a proper dispersive medium.