Machine Learning and Data-Driven Techniques for the Control of Smart Power Generation Systems:An Uncertainty Handling Perspective

Due to growing concerns regarding climate change and environmental protection,smart power generation has become essential for the economical and safe operation of both conventional thermal power plants and sustainable energy.Traditional first-principle model-based methods are becoming insufficient when faced with the ever-growing system scale and its various uncertainties.The burgeoning era of machine learning(ML)and data-driven control(DDC)techniques promises an improved alternative to these outdated methods.This paper reviews typical applications of ML and DDC at the level of monitoring,control,optimization,and fault detection of power generation systems,with a particular focus on uncovering how these methods can function in evaluating,counteracting,or withstanding the effects of the associated uncertainties.A holistic view is provided on the control techniques of smart power generation,from the regulation level to the planning level.The benefits of ML and DDC techniques are accordingly interpreted in terms of visibility,maneuverability,flexibility,profitability,and safety(abbreviated as the“5-TYs”),respectively.Finally,an outlook on future research and applications is presented.

Agents for Smart Power Grids

The future of electricity systems will compose of small-scale generation and distribution where end-users will be active participants with localized energy management systems that are able to interact on a free energy market. Software agents will most likely control power assets and interact together to decide the best and safest configuration of the power grid system. This paper presents a design of agents that can be deployed in real-time with capabilities that include optimization of resources, intensive computation, and appropriate decision-making. Jordan 51-bus system has been used for simulation with a total generation capacity of 4050 MW of which 230 MW represents renewable energy. The economic analyses demonstrated the use of smart grid technologies with 2016 generation—load profiles for nominal liquified gas (NLG) prices and ±20% sensitivity analysis. The results have shown variations in the range of 1% in the price of MWh with smart grid technologies. These variations are mainly driven by the fact that agents shift power generation to renewable power plants to produce maximum power at peak hours. As a result, there is a positive economic impact in both NLG ± 20% sensitivity analysis, due to the fact that agents coordinate to better displace expensive thermal generation with renewable generation. It is evident that renewable resources compensate for power at peak times and provide economic benefits and savings.

Application of Smart Power Strategy to Construct a More Effective Strategy to Denuclearize North Korea

The use of sanctions to coerce Pyongyang into abandoning its nuclear weapons and related programs is not working. North Korea continues to survive and expands its nuclear and missile capabilities. It is time for the US to construct a more successful North Korea strategy by applying a smart power strategy before the North Koreans can operationalize their nuclear ICBMs within the next several years. If and when that occurs, the US will inevitably consider the use of force to resolve the North Korean nuclear issue, but that will be too costly for the US and its allies. Washington must do all it can to avoid another war on the Asian mainland. The only practical uses of force are as defensive and enhanced deterrence measures to protect the US and its allies against North Korean nuclear and conventional provocations. Instead, the US should call for an immediate freeze of North Korea＇s nuclear and missile programs and demonstrate its willingness to co-exist with Pyongyang, Only by accepting co-existence with Pyongyang, Washington has an opportunity to persuade Beijing and Moscow to join its efforts with Seoul and Tokyo to denuclearize North Korea. It is time to engage North Korea by accepting it as it is and exercising strategic patience of a different kind to achieve US aims.

Research and Practice of Smart Power Consumption

As a vital part of a smart grid, smart power consumption enables real-time interaction between consumers and the grid. With improved management of the demand side and energy efficiency, smart power consumption plays an important role in emission reduction as well as the economic operation of the power grid. Meanwhile, it enhances the power grid to a larger scale infrastructure by the two-way transmission of energy and information. This paper introduces the research, practice and vision of smart power consumption in China.

‘Smart Power’ for ‘Sharing’ As an attitude of life

The Interst off Asia Essential Spring will be held from March 17th to 19th,2010,in Hong Kong Convention & Exhibition Centre. During this exhibition,the Interst off Asia Directions trend committee will present its apparel fabric trend forecast for next season's wardrobes,unfolding a story of ‘Smart Power’ of ‘Sharing’.

The Visualization Analysis of Research Hotspot and Frontier Technology of the Smart Power Distribution and Utilization Based on the Cite Space

In order to make an intensive study of the development of smart power distribution and utilization technology in China, their research hotspots and frontier technology are selected out through combining the informatics method, and using the CiteSpace which can take keyword cooccurrence analysis and draw the visualization graph. According to this result, we can infer the development trend of smart power distribution and utilization in the future, and providing reference for the researcher whose engage in this domain. The electric related literature was collected from the CNKI database in China. Under the smart power distribution and utilization domain, we also analyze the development of the power quality and the energy internet in detail.

Interaction Research on the Smart Power Consumption

Due to the rapid growth of the air conditioning load of the residents had bigger impact on power grid safety and power smooth operation, in order to improve energy conservation and reduce emissions of the residents, many countries had studied the home energy management system (HEMS) in the world. In this paper, based on the summary of the work of other countries, the HEMS research and practice situation of China were discussed, combined with the national development and reform commission (NDRC) project, the power consumption visualization?empirical research had been carried on in different cities in 2012, the interaction results show that the load can be reduced by an average of 6.67%, which proved that the electricity interactive was very interesting for long-term strategy of energy conservation and emissions reduction.

Matlab Code to Assess the Reliability of the Smart Power Distribution System Using Monte Carlo Simulation

Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. In this work, we develop a MATLAB code to examine the effect of the smart grid applications in improving the reliability of the power distribution networks via Monte Carlo Simulation approach. The system used in this paper is the IEEE 34 test feeder. The objective is to measure the installations of the Automatic Reclosers (ARs) as well as the Distributed Generators (DGs) on the reliability indices, SAIDI, SAIFI, CAIDI and EUE, and make comparisons with results from a previous study done by the authors using another approach. The MATLAB code should provide close results to the output of the previous research to verify its effectiveness.

Smart Power Substation Development in China

Over the past decade,China has undertaken substation intellectualization of more than 2000 substation operations in three stages.Much experience has been achieved during this developmental period.In this paper,the status of smart substation development in China is systematically presented,as well as future directions of the smart substation,such as adoption of the hierarchical protection and control system.

Community Smart Grid Utilizing Dynamic Demand Response and Tidal Power for Grid Stabilization

Conventional electricity generation is one of the largest contributors to climate change. Renewable energy sources are a promising part of the solution but uncertainty combined with a lack of controllability prevents renewable sources of power from being direct substitutes of conventional energy sources. This shift towards a higher penetration of renewable energy into the electric grid can be realized with the implementation of a more sophisticated smart grid, which uses dynamic demand response to alter demand on following generation. Research on renewable energy penetration of the grid predominately focuses on wind and solar power resources but demand cannot always match availability from these sources and therefore greatly increases the need for energy storage. Tidal power differs from solar and wind. It’s a predictably renewable resource which makes it extremely valuable even on a relatively small scale. Introduction of tidal power in a high penetration micro-grid can serve to stabilize the grid and reduce the amount of storage required. Widely different time scale for wind, solar and tidal power availability results in low cross correlations and therefore increases stability. This research describes an incremental approach to migrating a grid-tie island towards the formation of a smart-micro grid. The system will include a high penetration of three distributed generation systems, wind, solar and tidal and utilize commercially available energy storage and a smart-home management controller. Dynamic demand response through load balancing is implemented to minimize interactions with the electric grid. A second component of this work is to determine the optimum tidal generation capacity for the micro grid such that needed storage capacity from batteries or the utility grid is minimized.

Power-Aware Data Management Based on Hybrid RAM-NVM Memory for Smart Bracelet

Wearable devices become popular because they can help people observe health condition.The battery life is the critical problem for wearable devices. The non-volatile memory(NVM) attracts attention in recent years because of its fast reading and writing speed, high density, persistence, and especially low idle power. With its low idle power consumption,NVM can be applied in wearable devices to prolong the battery lifetime such as smart bracelet. However, NVM has higher write power consumption than dynamic random access memory(DRAM). In this paper, we assume to use hybrid random access memory(RAM)and NVM architecture for the smart bracelet system.This paper presents a data management algorithm named bracelet power-aware data management(BPADM) based on the architecture. The BPADM can estimate the power consumption according to the memory access, such as sampling rate of data, and then determine the data should be stored in NVM or DRAM in order to satisfy low power. The experimental results show BPADM can reduce power consumption effectively for bracelet in normal and sleeping modes.

Power Quality Data Compression Based on Iterative PCA Algorithm in Smart Distribution Systems

To reduce the stress of data transmission and storage for power quality (PQ) in smart distribution systems and help PQ analysis, a multichannel data compression based on iterative PCA (principal component analysis) algorithm is introduced. The proposed method uses PCA to reduce the redundancy of data to achieve the purpose of compressing data. In order to improve the calculating speed, an iterative method is proposed to compute the principal components of the covariance matrix. The correctness and feasibility of the proposed method are verified by field PQ data tests. Compared with discrete wavelet transform (DWT) method, the proposed method has good performance on compression ratio and reconstruction accuracy.

Performance of joint dual links dynamic power control and smart antenna for TDMA/TDD cellular mobile communications

Interference cancellation is made available by using smart antenna at cellular base stations. Well distributed cumulative probability of signal to interference plus noise power ratio appears to be vital for cellular mobile multimedia communications. A scenario of dual links dynamic power control combined to a solution of smart antenna is proposed to adjust the instant transmission power in terms of the disparity from the favorite range. Simulation results show that this method is quite effective to improve the cumulative distribution probability performance. Meanwhile, accompanying low power consumption is also obtained at both base stations and mobile stations.

基于SMART准则的核电企业安全文化业绩指标设计

核电企件运营中安全问题是首要问题,建立安全文化控制体系是进行风险管理的一个有效手段。文中根据核电企业特点,使用国际通用的SMART评价准则对计算安全文化指数所需的指标作了分类研究。同时为满足持续改进的安全文化控制体系实施的需要,对有代表性的业绩指标作了量化处理。

最新电压毛刺(Power Glitch)攻击与防御方法研究

电压毛刺(Power Glitch)攻击是通过快速改变输入到芯片的电压,使得芯片里的某些晶体管受到影响,引起一个或多个触发器进入错误状态,从而导致处理器会跳过或实施错误的操作,使芯片内隐藏的信息随着产生的错误而泄露出来。对电压毛刺攻击与防御技术的最新进展情况进行了综述。在攻击方面,针对攻击目的的不同,详细介绍了RSA-CRT签名运算、RSA非CRT签名运算、对非易失存储器的攻击技术。防御技术分别介绍了电压毛刺检测电路和掩码,并分析了各种防御方案的优缺点。

埋入式光纤模式功率调制传感原理及实验研究——航天smart结构

对 Smart材料 /结构中的光纤传感原理进行了探讨 ,并进行了实验研究。这种新研制的传感器工作原理是基于模式功率调制。远场光强将反映结构内的变形场 ,亦即光纤受到外界加载或扰动后所产生的变形。最后提出了应用多模光纤在编织复合材料 Smart结构中进行远场光强测量的方案 ,建立了实验装置 ,给出了实验结果并进行了讨论。

Smart Boilers: Grid Support Services from Non-Critical Loads

The aim of this paper is to present the concept of a simple and cheap upgrade for electric water boilers, allowing them to provide power quality services to the distribution grid. The upgrade requires only minimum additional hardware and it is easily installable. “Smart Boilers”, as the upgraded boilers are named, perform precise active and reactive power control, but most significantly mitigate line current harmonics. Αctive and reactive power control is implemented by appropriate regulation of the modulation sinewave amplitude and phase, respectively. This type of control is easily customizable in order to accommodate a variety of power quality targets, depending on the required level of services and available grid monitoring equipment. The method used for line current harmonic compensation is based on the injection of mirror harmonics created at the modulation stage of the converter. It is indifferent of harmonic source: it is equally successful at mitigating harmonics caused by the power electronic converter of the Smart Boiler, other sources of current harmonics or loads. The achieved grid services are clearly beyond the “on/off” operation of electric boilers, currently implemented by Demand Side Management (DSM) in order to shift load away from peak hours. It has been demonstrated through simulations, that Smart Boilers can assist voltage regulation at terminal buses, compensate reactive power and suppress harmonic currents at lines.

Progress and prospects of innovative coal-fired power plants within the energy internet

The development of electrical engineering and electronic, communications, smart power grid, and ultra-high voltage transmission technologies have driven the energy system revolution to the next generation: the energy internet. Progressive penetration of intermittent renewable energy sources into the energy system has led to unprecedented challenges to the currently wide use of coal-fired power generation technologies. Here, the applications and prospects of advanced coal-fired power generation technologies are analyzed. These technologies can be summarized into three categories:(1) large-scale and higher parameters coal-fired power generation technologies, including 620/650/700 oC ultra-supercritical thermal power and double reheat ultra-supercritical coal-fired power generation technologies;(2) system innovation and specific, highefficiency thermal cycles, which consist of renewable energy-aided coal-fired power generation technologies, a supercritical CO_2 Brayton cycle for coal-fired power plants, large-scale air-cooling coal-fired power plant technologies, and innovative layouts for waste heat utilization and enhanced energy cascade utilization;(3) coal-fired power generation combined with poly-generation technologies, which are represented by integrated gasification combined cycle(IGCC) and integrated gasification fuel cell(IGFC) technologies. Concerning the existing coal-fired power units, which are responsible for peak shaving, possible strategies for enhancing flexibility and operational stability are discussed. Furthermore, future trends for coal-fired power plants coupled with cyber-physical system(CPS) technologies are introduced. The development of advanced, coal-fired power generation technologies demonstrates the progress of science and is suitable for the sustainable development of human society.

基于SMART准则的火电机组设备采购评标指标体系研究

评标指标体系是对被评价对象进行全面考察的工作蓝本,它应当在明确的评价目的的指导下,尽可能全面、深入地刻画被评价对象的各个方面。文章基于SMART准则和指标体系设计的基本原则,结合火电机组设备采购评标的特点,阐述了SMART准则在火电机组设备采购评标指标体系设计中的具体应用。