Simulation of Greenhouse Heating System Using Fuzzy Smith Cascade Compound Control

Aiming at characteristic of time delay, time-varying parameters and much disturb in glass greenhouse heating system, fuzzy smith cascade compound control policy based on typical PID cascade compound control policy is proposed. Simulation results show that it is effective to overcome the influence of time delay on stability of control system and the system possesses strong robust and good dynamic performance..

Temperature Control Based on Fuzzy Logic Two-degree-of-freedom Smith Internal Model

According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed.Firstly,the mathematical model of the temperature control system is established by using the step response method,and then the two-degree-of-freedom Smith internal model controller is designed,and the good tracking performance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability.Secondly,the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm.The simulation results show that,compared with the traditional internal model control,fuzzy internal model PID control and two-degree-of-freedom Smith internal model control,the algorithm proposed in this paper improves the influence of lag time on the control system,realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters,and improves the control performance of the system.

Research on fuzzy self-adaptive PI-Smith control in long time-delay system

The long time-delay often exists in industrial process. In order to overcome the big overshoot and long regulating time of the long time-delay system control, a new fuzzy self-adaptive PI-Smith control method is proposed. This method combines the Smith predictive control with fuzzy self-adaptive proportional-integral （PI） control. The traditional proportional-integral-derivative （PID） controller in Smith predictive control is replaced by fuzzy PI controller which utilizes the principle of fuzzy control to tune parameters of PI controller on-line. The results of simulation for electric furnace show that the method has the advantages of shortening regulating time, no overshoot, no steady-state error, excellent control accuracy, and good adaptive ability to the change of system model.

Gear downshift control of inverse-automatic mechanical transmission of electric vehicle

In order to improve the driving dynamics and riding comfort of pure electric vehicles,taking a two-speed I-AMT(Inverse-Automatic Mechanical Transmission)with rear friction clutch as the research object,a gear shift strategy,which consists of the open-loop control of the clutch position control and the closed-loop control of the drive motor speed control,is proposed.Considering the inherent time-delay and external disturbances within the motor speed adjustment system,a two DOF(degree-of-freedom)Smith predictor with feedforward input is designed to track the target speed of the drive motor.The feedforward input is used to eliminate the influence of clutch sliding friction on the motor speed control,while the feedback speed tracking controller is applied to realize the speed tracking performance with the existence of time-delay and the external disturbance.In order to verify the effectiveness of the gear shift control strategy and the accuracy of the two DOF Smith controller with feedforward control,simulation results comparison is firstly carried out to illustrate the effectiveness of the control scheme.Then,a light pure electric vehicle equipped with I-AMT was used for downshift experiments under large throttle,which is the most difficult working scenario to control the transmission.The experimental results show that the two DOF Smith controller can eliminate the influence of time-delay on the closed-loop control,and the proposed whole gear shift control strategy can limit the clutch slippage time within 1.5 s,resulting in a smaller shift jerk,thus guarantee the driving dynamics and riding comfort simultaneously.