The segregation of Sn and discontinuous precipitation at grain boundaries are detrimental to the strength,ductility,and machinability of the Cu−Ni−Sn alloy.A strategy to solve the above problems is multi-component com...The segregation of Sn and discontinuous precipitation at grain boundaries are detrimental to the strength,ductility,and machinability of the Cu−Ni−Sn alloy.A strategy to solve the above problems is multi-component composition design by introducing strong enthalpic interaction element.In this work,a series of Cu_(80)Ni_(15)Sn_(5−x)Ti_(x)(at.%)alloys were designed by cluster-plus-glue-atom model,and the effects of Ti content on the microstructure and properties of the alloys were systematically investigated using TEM and other analysis methods.The results demonstrate that Ti can effectively inhibit the segregation and discontinuous precipitation while promoting continuous precipitation to improve the high-temperature stability of the alloys.As the Ti content increases,the distribution of Ti changes from uniform distribution to predominant precipitation.The hardness and conductivity of the alloy exceed those of the C72900(Cu−15Ni−8Sn(wt.%))commercial alloy and the Cu_(80)Ni_(15)Sn_(5)(at.%)reference alloy when Ti is in the solution state.展开更多
Different from other alloys,the observation in this work on the dendritic mushy zone shows that the freckles are formed in two different regions before and after peritectic reaction in directional solidification of Sn...Different from other alloys,the observation in this work on the dendritic mushy zone shows that the freckles are formed in two different regions before and after peritectic reaction in directional solidification of Sn−Ni peritectic alloys.In addition,the experimental results demonstrate that the dendritic morphology is influenced by the temperature gradient zone melting and Gibbs−Thomson effects.A new Rayleigh number(Ra_(P))is proposed in consideration of both effects and peritectic reaction.The prediction of Ra_(P) confirms the freckle formation in two regions during peritectic solidification.Besides,heavier thermosolutal convection in samples with larger diameter is also demonstrated.展开更多
The liquid state undercoolability and crystal growth kinetics of ternary Ni-5%Cu-5%Sn and Ni-10%Cu-10%Sn alloys are investigated by the glass fluxing method. In these two alloys, experimental maximum undercoolings of ...The liquid state undercoolability and crystal growth kinetics of ternary Ni-5%Cu-5%Sn and Ni-10%Cu-10%Sn alloys are investigated by the glass fluxing method. In these two alloys, experimental maximum undercoolings of 304 K （0.18TL ） and 286K （0.17TL ） are achieved and the dendritic growth velocities attain 39.8 and 25.1 m/s, respectively. The transition of morphology from coarse dendrite into equiaxed structure occurs and the grain size of the a （Ni） phase decreases remarkably when the undercooling increases. Both the lattice constant and microhardness increase obviously with the enhancement of undercooling. The enrichment of Cu and Sn solute contents reduces the dendritic growth velocity, while enhances the lattice constant and microhardness of a （Ni） phase.展开更多
This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, ...This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, it is found that the Ni3Sn has larger relative expansion ratio and lower electrochemical potential, with its specific plateaus voltage around 0.3 eV when lithium atoms are filled in all octahedral interstitial sites, and the relative expansion ratio increasing dramatically when the lithiated phase transits from octahedral interstitial sites to tetrahedral interstitial sites. So this phase is a devastating phase for whole alloy electrode materials.展开更多
Large undercoolings up to 395K (0.28TE) are obtained for 15g samples of Ni-32.5%Sn eutectic alloy by superheating the alloy melt to 108-700K above its eutectic temperature and consequently destroying most of the inher...Large undercoolings up to 395K (0.28TE) are obtained for 15g samples of Ni-32.5%Sn eutectic alloy by superheating the alloy melt to 108-700K above its eutectic temperature and consequently destroying most of the inherent heterogeneous nuclei. The recalcscence phenomenon and its dependence on undercooling and on crystal nuclcation and growth, as well as its relationship to solidification microstructures are studied. The crystalli/ation fraction during recalcsccnce is also calculated. Experiments reveal that recalcscence degree increases with undercooling when the latter is below a certain critical value∧Te, but it decreases as undercooling increases above A 7'( (under present conditions∧Te= 245K, i. c. 0.17TE). The greater the recalescencc degree, the larger the proportion of anomalous eutectic in solidified structures. It is inferred that anomalous eutectic is the product of rapid solidification while lamellar eutectic forms at much slower nuclcation rate and growth velocity.展开更多
An investigation on the magnetostructural transformation and magnetocaloric properties of Ni48-xCo2Mn38＋xSn12（x = 0, 1.0, 1.5, 2.0, and 2.5） ferromagnetic shape memory alloys is carried out. With the partial replac...An investigation on the magnetostructural transformation and magnetocaloric properties of Ni48-xCo2Mn38＋xSn12（x = 0, 1.0, 1.5, 2.0, and 2.5） ferromagnetic shape memory alloys is carried out. With the partial replacement of Ni by Mn in the Ni_（48）Co2Mn38Sn12 alloy, the electron concentration decreases. As a result, the martensitic transformation temperature is decreased into the temperature window between the Curie-temperatures of austenite and martensite. Thus, the samples with x = 1.5 and 2.0 exhibit the magnetostructural transformation between the weak-magnetization martensite and ferromagnetic austenite at room temperature. The structural transformation can be induced not only by the temperature,but also by the magnetic field. Accompanied by the magnetic-field-induced magnetostructural transformation, a considerable magnetocaloric effect is observed. With the increase of x, the maximum entropy change decreases, but the effective magnetic cooling capacity increases.展开更多
The mechanism of lithium intercalation/deintercalation for phase Al0.8Ni3Sn0.2 as anode material used in lithium ion battery was studied carefully based on the first-principle plane wave pseudo-potential method. The c...The mechanism of lithium intercalation/deintercalation for phase Al0.8Ni3Sn0.2 as anode material used in lithium ion battery was studied carefully based on the first-principle plane wave pseudo-potential method. The calculated results indicated that SnNi Al alloy had high theoretical capacity when used as anode material, however, there was high initial irreversible capacity loss because of the large volume expansion. Therefore the technological parameters during preparing the Sn-Ni-Al anode should be controlled strictly to make the content of Al0.8Ni3Sn0.2 phase as low as possible and to make the anode consist of promising Sn-Ni and AI-Ni phases. For comparison, an experiment based on magnetron sputtering was done. The result showed that the calculation is in good agreement with the experiment. We found that the first-principle investigation method is of far-reaching significance in synthesising new commercial anode materials with high capacity and good cycle performance.展开更多
Ag-Sn-Cu-Bi-Ni alloy was internally oxidized in air. The phase constitution,surface morphology and microstructure evolution of the alloy after internal oxidation were analyzed by X-ray diffractometry,optical microscop...Ag-Sn-Cu-Bi-Ni alloy was internally oxidized in air. The phase constitution,surface morphology and microstructure evolution of the alloy after internal oxidation were analyzed by X-ray diffractometry,optical microscopy and scanning electron microscopy,respectively. The results show that the surface color of samples after internal oxidation is different from the different oxidation time and temperatures. The oxidation reaction firstly takes place on the grain boundaries. The microstructure developed on the initial stage of internal oxidation is fir-tree crystal texture. However,this texture structure disappears accompanied by grain growth and oxides forming during the prolonged oxidation. Finally,the oxide particles are uniformly dispersed in the silver matrix.展开更多
基金support from the National Natural Science Foundation of China(No.52071052).
文摘The segregation of Sn and discontinuous precipitation at grain boundaries are detrimental to the strength,ductility,and machinability of the Cu−Ni−Sn alloy.A strategy to solve the above problems is multi-component composition design by introducing strong enthalpic interaction element.In this work,a series of Cu_(80)Ni_(15)Sn_(5−x)Ti_(x)(at.%)alloys were designed by cluster-plus-glue-atom model,and the effects of Ti content on the microstructure and properties of the alloys were systematically investigated using TEM and other analysis methods.The results demonstrate that Ti can effectively inhibit the segregation and discontinuous precipitation while promoting continuous precipitation to improve the high-temperature stability of the alloys.As the Ti content increases,the distribution of Ti changes from uniform distribution to predominant precipitation.The hardness and conductivity of the alloy exceed those of the C72900(Cu−15Ni−8Sn(wt.%))commercial alloy and the Cu_(80)Ni_(15)Sn_(5)(at.%)reference alloy when Ti is in the solution state.
基金the National Natural Science Foundation of China(No.51871118)the Basic Scientific Research Business Expenses of the Central University and Open Project of Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education,Lanzhou University,China(No.LZUMMM2021005)+1 种基金the Science and Technology Project of Lanzhou City,China(No.2019-1-30)the State Key Laboratory of Special Rare Metal Materials,China(No.SKL2020K003).
文摘Different from other alloys,the observation in this work on the dendritic mushy zone shows that the freckles are formed in two different regions before and after peritectic reaction in directional solidification of Sn−Ni peritectic alloys.In addition,the experimental results demonstrate that the dendritic morphology is influenced by the temperature gradient zone melting and Gibbs−Thomson effects.A new Rayleigh number(Ra_(P))is proposed in consideration of both effects and peritectic reaction.The prediction of Ra_(P) confirms the freckle formation in two regions during peritectic solidification.Besides,heavier thermosolutal convection in samples with larger diameter is also demonstrated.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51327901 and 51301138the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No 20126102120064+1 种基金the Aviation Science Foundation of China under Grant No 2014ZF53069the Fundamental Research Funds for the Central Universities under Grant No3102014KYJD044
文摘The liquid state undercoolability and crystal growth kinetics of ternary Ni-5%Cu-5%Sn and Ni-10%Cu-10%Sn alloys are investigated by the glass fluxing method. In these two alloys, experimental maximum undercoolings of 304 K （0.18TL ） and 286K （0.17TL ） are achieved and the dendritic growth velocities attain 39.8 and 25.1 m/s, respectively. The transition of morphology from coarse dendrite into equiaxed structure occurs and the grain size of the a （Ni） phase decreases remarkably when the undercooling increases. Both the lattice constant and microhardness increase obviously with the enhancement of undercooling. The enrichment of Cu and Sn solute contents reduces the dendritic growth velocity, while enhances the lattice constant and microhardness of a （Ni） phase.
基金supported by the National Natural Science Foundation of China (Grant No 50771046)the Key Program of Natural Science Foundation of Guangdong Province of China (Grant No 05200534)+1 种基金the Program for Tackling Key Problems of Guangdong Province of China (Grant No 2006A10704003)the Program for Tackling Key Problems of Guangzhou City of China (GrantNo 2006Z3-D2031)
文摘This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, it is found that the Ni3Sn has larger relative expansion ratio and lower electrochemical potential, with its specific plateaus voltage around 0.3 eV when lithium atoms are filled in all octahedral interstitial sites, and the relative expansion ratio increasing dramatically when the lithiated phase transits from octahedral interstitial sites to tetrahedral interstitial sites. So this phase is a devastating phase for whole alloy electrode materials.
文摘Large undercoolings up to 395K (0.28TE) are obtained for 15g samples of Ni-32.5%Sn eutectic alloy by superheating the alloy melt to 108-700K above its eutectic temperature and consequently destroying most of the inherent heterogeneous nuclei. The recalcscence phenomenon and its dependence on undercooling and on crystal nuclcation and growth, as well as its relationship to solidification microstructures are studied. The crystalli/ation fraction during recalcsccnce is also calculated. Experiments reveal that recalcscence degree increases with undercooling when the latter is below a certain critical value∧Te, but it decreases as undercooling increases above A 7'( (under present conditions∧Te= 245K, i. c. 0.17TE). The greater the recalescencc degree, the larger the proportion of anomalous eutectic in solidified structures. It is inferred that anomalous eutectic is the product of rapid solidification while lamellar eutectic forms at much slower nuclcation rate and growth velocity.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51601092,51571121,and 11604148)the Fundamental Research Funds for the Central Universities,China(Grant Nos.30916011344 and 30916011345)+5 种基金Jiangsu Natural Science Foundation for Distinguished Young Scholars,China(Grant No.BK20140035)China Postdoctoral Science Foundation(Grant No.2016M591851)the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20160833 and BK20160829)Qing Lan Project of Jiangsu Province,ChinaPriority Academic Program Development of Jiangsu Higher Education Institutions,ChinaNMG–NJUST Joint Scholarship Program for Ishfaq Ahmad Shah(Student ID:914116020118)
文摘An investigation on the magnetostructural transformation and magnetocaloric properties of Ni48-xCo2Mn38＋xSn12（x = 0, 1.0, 1.5, 2.0, and 2.5） ferromagnetic shape memory alloys is carried out. With the partial replacement of Ni by Mn in the Ni_（48）Co2Mn38Sn12 alloy, the electron concentration decreases. As a result, the martensitic transformation temperature is decreased into the temperature window between the Curie-temperatures of austenite and martensite. Thus, the samples with x = 1.5 and 2.0 exhibit the magnetostructural transformation between the weak-magnetization martensite and ferromagnetic austenite at room temperature. The structural transformation can be induced not only by the temperature,but also by the magnetic field. Accompanied by the magnetic-field-induced magnetostructural transformation, a considerable magnetocaloric effect is observed. With the increase of x, the maximum entropy change decreases, but the effective magnetic cooling capacity increases.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50771046)China Postdoctoral Science Foundation (Grant No. 20080440764)Guangdong Province Natural Science Foundation (Grant No. 9451063101002082)
文摘The mechanism of lithium intercalation/deintercalation for phase Al0.8Ni3Sn0.2 as anode material used in lithium ion battery was studied carefully based on the first-principle plane wave pseudo-potential method. The calculated results indicated that SnNi Al alloy had high theoretical capacity when used as anode material, however, there was high initial irreversible capacity loss because of the large volume expansion. Therefore the technological parameters during preparing the Sn-Ni-Al anode should be controlled strictly to make the content of Al0.8Ni3Sn0.2 phase as low as possible and to make the anode consist of promising Sn-Ni and AI-Ni phases. For comparison, an experiment based on magnetron sputtering was done. The result showed that the calculation is in good agreement with the experiment. We found that the first-principle investigation method is of far-reaching significance in synthesising new commercial anode materials with high capacity and good cycle performance.
基金Project (2006BAE03B03) supported by the Key Project of 11th Five-Year Plan of China
文摘Ag-Sn-Cu-Bi-Ni alloy was internally oxidized in air. The phase constitution,surface morphology and microstructure evolution of the alloy after internal oxidation were analyzed by X-ray diffractometry,optical microscopy and scanning electron microscopy,respectively. The results show that the surface color of samples after internal oxidation is different from the different oxidation time and temperatures. The oxidation reaction firstly takes place on the grain boundaries. The microstructure developed on the initial stage of internal oxidation is fir-tree crystal texture. However,this texture structure disappears accompanied by grain growth and oxides forming during the prolonged oxidation. Finally,the oxide particles are uniformly dispersed in the silver matrix.
