Influences of Electrolytes on the Soap-free Emulsion Copolymerization of St-MMA-AA

Monodisperse functional polymer microspheres with different particle size and with clean surface were prepared by batch soap-free emulsion polymerization of styrene, methyl methacrylate and acrylic acid in the presence of salts, and the influences of type and amount of electrolytes on polymerization process and particle morphology were investigated. Results showed that there was a critical concentration for different electrolyte to make polymerization process and the resultant emulsion stable, and the particle size increased with the increase of electrolyte concentration. The effect of metal ions was Ca^2＋〉〉K^＋〉Na^＋〉Li^＋, and the effect of haloids was Br〉Cl〉F. Keywords： Electrolyte, soap-free emulsion polymerization, polystyrene, latex particle morphology.

Synthesis and Characterization of Poly (Methyl Methacrylate)/Polyethylenimine Grafting Core-Shell Nanoparticles for CO2 Adsorption Using Soap-Free Emulsion Copolymerization

Unlike previous emulsion polymerization, we used grafting reactions in soap-free emulsion systems. In this study, we synthesized grafted PMMA/PEI core-shell nanoparticles by varying the MMA/PEI content and molecular weight of PEI (Mn = 600, 8000, and 10,000). The size and morphology of the core-shell nanoparticles were characterized by a particle size analyzer and scanning electron microscopy. The nanoparticles were 178 - 408 nm in diameter and swelled in water or methanol by 30 - 75 nm. The size of the nanoparticles increased with MMA contents, whereas the size distribution progressively became homogeneous with increasing molecular weight of PEI. Lastly, we measured CO2 adsorption capacity of the grafted PMMA/PEI core-shell nanoparticles, and we found the capacity to be limited at a level of 0.69 mg, which occurred for nanoparticles prepared from emulsions at a pH value of 11.

CATALYTIC COPOLYMERIZATION OF STYRENE AND ETHYLENE BY NEUTRAL NICKEL(Ⅱ) COMPLEXES IN EMULSION

Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of the s...

PREPARATION AND CHARACTERIZATION OF AFFINITY POLYMER BASIC MICROSPHERES BY SOAP-FREE EMULSION POLYMERIZATION

Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presence of 2.2′- azobis(2-methylpropionamidine) dihydrochloride as an initiator.The kinetics of soap-free emulsion polymerization and the effects of polymerization factors were examined.In addition,the optimum polymerization conditions of poly(styrene-co- glycidyl methacrylate) latex microspheres for...

Preparation of Self-crosslinked Fluorocarbon Polymer Emulsion with Core-shell Structure by the Method of Soap-free Emulsion Polymerization

Using methyl methacrylate （MMA）, butyl acrylate（BA） and hexafluorobutyl acrylate（HFBA） as main raw materials, we prepared self-crosslinked fluorocarbon polymer emulsion with core-shell structure via soap-free emulsion polymerization when the conception of particle design and polymer morphology was adopted. Moreover, the influence of mole ratio of BA to MAA, pH value on the oligomer was studied. And the effects of the added amount of oligomer, self-crosslinked monomer and HFBA, mass ratio of BA to MMA, reaction temperature and the initiator on the polymerization technology and the performance of the product, were investigated and optimized. The structure and performance of the fluorocarbon polymer emulsion were characterized and tested with FTIR, TEM, MFT and contact angle and water absorption of the latex film. The experimental results show that the optimal conditions for preparing fluorocarbon polymer emulsion are as follows： for preparing the oligomer, tool ratio of BA to MAA is equal to 1.0 ： 1.60, and pH value is controlled within the range of 8.0 and 9.0; for preparing fluorocarbon polymer emulsion, the added amount of oligmer[P（BA/MANa）] is 6%; mass ratio of BA to MMA is 40 ＂ 60; the added amount of self-crosslinked monomer is 2%, the added amount of HFBA is 15 %; reaction temperature is 80 ℃; the mixture of potassium persulfate and sodium bisulfite is used as the initiator. The film-forming stability of the fluorocarbon polymer emul- sion and the performance of the latex film, which is prepared with the soap-free emulsion polymerization, are better than that prepared with the conventional emulsion polymerization.

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAP-FREE P(MMA-EA-MAA)PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.

SOAPLESS EMULSION COPOLYMERIZATION IN THE PRESENCE OF BARIUM SULFATE POWDER

To investigate soapless emulsion copolymerization in the presence of a solid phase, copolymerization experiments were carried out for the styrene-butyl acrylate-K_2S_2O_8-water system by using barium sulfate powder,which is assumed to be chemically inert.Reaction conditions were varied with respect to barium sulfate powder quantity,initiator concen- tration and temperature.These factors were investigated with respect to the effect on reaction rate and conversion,polymer particle number and diameter,and latex stability.

Semibatch Emulsifier-free Emulsion Copolymerization of Methyl Methacrylate and n-Butyl Acrylate in the Presence of 2-Hydroxyethyl Methacrylate

The semibatch emulsifier-free emulsion copolymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) in the presence of 2-hydroxyethyl methacrylate (HEMA) initiated by K2S2O8 (PSP) was studied. The average particle diameter increases with an increase of total solids content, HEMA content, PSP content, ionic strength of the system and monomer feed rate, and decreases with the monomer feed ratio from 3/1 (MMA/BA mole.) to 1/3. The stability of this reaction system is improved by adding HEMA as nonionic comonomer. The high solids content (50%) latex with monodisperse particle can be obtained using this process.

EFFECT OF 2-HYDROXYETHYL METHACRYLATEON SEMIBATCH EMULSIFIER-FREE EMULSION COPOLYMERIZATION OF METHYLMETHACRYLATE AND BUTYL ACRYLATE

The semibatch emulsifier-free emulsion copolymerization of methyl methacrylate(MMA and butyl acrylate (BA) in the presence of 2-hydroxyethyl methacrylate (HEMA)initiated by K2S2O8 (PSP) was studied. The latex particles can maintain an appreciablestability during the emulsifier-free emulsion copolymerization of MMA and BA in thepresence of HEMA The average particle diameter increase with an increase of totalsolids content, HEMA content, PSP content, ioniC strength of the system and monomerfeed rate, and decrease with the monomer feed ratio From 3/1(MMA/BA;molar ratio.)to1/3. The stability of this reaction system is improved by adding HEMA as nonioniccomonomer High solids content (50%) latex with monodisperse particle can beobtained using this process.

EFFECTS OF ω-ACRYLOYL POLY (ETHYLENE OXIDE) MACROMONOMER ON EMULSIFIER-FREE EMULSI0N COPOLYMERIZATION OF METHYL METHACRYLATE AND n-BUTYL ACRYLATE

Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.

Self-assembly of Gradient Copolymer Synthesized by Spontaneous Batch RAFT Emulsion Polymerization and Its Application on Encapsulating Ag Nanoparticles

The gradient copolymers of acrylic acid and trifluoroethyl methacrylate（coded as P（TFEMAgrad-AA）） were synthesized via reversible addition-fragmentation transfer（RAFT） emulsifier-free emulsion polymerization. The spontaneous batch feeding approach was used to control the gradient chain sequence. Transmission electron microscopy（TEM） analysis revealed that the P（TFEMA-grad-AA） can self-assemble to form spherical micelles, rodlike micelles or vesicles in selective solvents. Morphological transition of the P（TFEMA-grad-AA） micelles was sensitive to the water content of the dioxane/water mixed solvent. More interestingly, Ag nanoparticles（NPs） were encapsulated by the P（TFEMA-grad-AA） micelles during the selfassembly process. The gradient chain sequence made the Ag NPs easily enter the core of the micelles, even when P（TFEMA-grad-AA） had less hydrophobic fluoro-units and more hydrophilic units. TEM images with energy dispersive spectrometer indicated that the nanocomposite micelles consisted of a Ag NPs core and a gradient copolymer shell.

Study on N-Phenylmaleimide/Styrene /Acrylonitrile Copolymer Prepared by Emulsion Polymerization

The emulsion polymerization of N-phenylmaleimide, Styrene and acrylonitrile was studied. The thermal property of this copolymer was measures by dynamic thermomechanical analysis(DMA). The mechanical properties, such as tensile strength, hardness and fie-cural Strength were StUdied experimentally. The results indicated that not only the monomer component but also the polymerization technologies have effect on the properties of the copolymer. The optimum monomer content and suitable polymerization method were obtained.

Ether-/Ester-/Fluorine-Rich Binding Emulsion Formula for Lithium-Ion Batteries

Practical application of a Si anode in a high-energy-density battery cannot be achieved due to the huge volume expansion of these anodes.Researchers have focused on binders of the anode to restrict volume expansion in order to address this issue,as the hydrogen bonds and mechanical properties of binders can be used to enhance adhesion and accommodate the volume changes of a Si anode.Herein,we comprehensively consider binders’hydrogen bonds,mechanical properties,stability,and compatibility with the electrolyte solution,and design an ether-/ester-/fluorine-rich composite polymer,named P(TFEMAco-IBVE).The proposed binder formula possesses outstanding stability,adhesion,and mechanical strength;moreover,it can accommodate the dramatic volume changes of a Si electrode and exhibits excellent electrochemical performance,achieving a high areal capacity of about 5.4 mA·h·cm^(-2).This novel polymer design may be applied to other electrode materials in the next generation of lithium-ion batteries.

A New Kind of Void Soap-free P(MMA-EA-MAA) Latex Particles

Soap-free P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and the particle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.

Preparation of Chitosan-g-PAM PS in H_2O/scCO_2 Inverse Emulsion

Chitosan （CS） was successfully modified in supercritical carbon dioxide （ scCOz ） by grafting method to enhance its water solubility. In this work, a three.arm star-like fluorinated polymer was synthesized by atom transfer radical polymerization （ ATRP ） method and applied as a surfactant in supereriticul carbon dioxide （scCO2 ）. Then 2-acrylamido-2-methyl propane sulfonie acid （AMPS） was grafted onto CS （CS-g-PAMPS） in H2O/scCO2 inverse emulsion. The effects of mass ratio of water and surfactants （Rw/s ） and pressure of scCO2 on the grafting reaction were investigated. The grafting rate, partide size, and dispersity in water of CS-g-PAMPS varied greatly as Rw/s and pressure of scCO2 changed. It could be found that the value of Rw/s at 12 and the pressure of scCO2 at 30 MPa were the optimum conditions for the grafting reaction. CS-g-PAMPS prepared in this reaction system has higher grafting rate, smaller particle sizes, and better dispersity in water than those prepared via conventional methods.

N⁃苯基马来酰亚胺共聚物的合成及对PVC树脂耐热改性效果研究

通过种子乳液聚合结合半连续加料方式,成功聚合出分子结构一致且与聚氯乙烯(PVC)树脂具有良好相容性的聚(N‐苯基马来酰亚胺‐苯乙烯‐丙烯腈)(PNSA)共聚物胶乳,将其与PVC树脂直接复合制备PNSA/PVC复合材料,并对PNAS耐热改性的效果进行评价。结果表明,PNSA纳米胶乳颗粒粒径在155.3~251.5 nm之间,粒径分布均一;PNSA共聚物分子组成呈无规结构,分子结构一致,差示扫描量热曲线呈现单一的玻璃化转变温度(T_(g)),且与PVC树脂具有极佳的相容性;PNSA含量由0升高至50%(质量比,下同)时,复合材料的T_(g)由84.8℃提高到107.2℃,提高了22.4℃,维卡软化温度由71.2℃提高到91.9℃,提高了20.7℃;除耐热性改善以外,复合材料的力学性能也有一定程度的提高,本文的研究有利于PVC应用领域的进一步拓展。

Oxidation-responsive framboidal triblock copolymer vesicles prepared by photoinitiated RAFT seeded emulsion polymerization

Stimulus-responsive vesicles have broad applications in a variety of areas. Herein, oxidation-responsive framboidal triblock copolymer vesicles are prepared by photoinitiated RAFT seeded emulsion polymerization of a thioether-functionalized monomer using diblock copolymer vesicles as seeds. The obtained framboidal vesicles can transform into worms or spheres in the presence of reactive oxygen species,which can be further used for controlled release of cargos(e.g., silica nanoparticles).

Engineering the Morphologies of Block Copolymer Particles from the Confined Self-assembly within Emulsion Droplets

Block copolymers(BCPs)can automatically assemble into various regulated nanoparticles when they are confined within the emulsion droplet be-cause of the structural frustration of polymer chains and the soft template effect of the oil/water interface.In the past few years,great efforts have been made to regulate the morphologies of the resulting BCP particles.In this review article,various strategies for tuning oil/water interfacial prop-erties to engineer the as-formed BCP particles were summarized.Then,the comprehensive scenarios of the applications of the resulting BCP parti-cles were discussed.Finally,the future tendency and challenge of the self-assembly of BCPs confined in emulsion droplet were suggested.

高取代度阳离子淀粉基苯丙乳液的合成和应用研究

以苯乙烯(St)、丙烯酸正丁酯(BA)、丙烯酸叔丁酯(tBA)为单体,H2O2-FeSO4为引发体系,高取代度阳离子淀粉(HCS)为乳化剂,开展了苯丙表面施胶剂的无皂乳液聚合。探讨了HCS的用量、分子量(以特性黏度表示)、取代度对乳液聚合的影响,使用多种方法评价了乳液的理化性能与应用性能。所制备得的高取代度阳离子淀粉基苯丙乳液胶粒平均粒径小(126.2 nm)、正电性强(Zeta电位为25.8 mV)、贮存稳定性优良;将其应用在瓦楞原纸上,施胶纸张的Cobb值为21.6 g/m^(2),水滴接触角达121.6°,与低取代度阳离子淀粉基苯丙乳液相比,其应用效果具有明显优势。研究对其能赋予纸张更佳施胶效果的原因也提出了机理性的解释。

Emulsion confined block copolymer self-assembly:Recent progress and prospect

In the past few decades,significant progress in block copolymer self-assembly has been achieved in many fields,and with the development of nanoscience and nanotechnology,more and more complex situations need block copolymer self-assembly based nanoplatforms having more complex structures for specific multimodal or multiplexed applications.Through the combination of emulsification and self-assembly of the block copolymer,different materials with exotic architectures and functions could be combined within an entity,such as controlled vesicles,Janus particles,and composite particles which are more like ideal nanoplatforms.Various designs can show their different desired properties depending upon the application situation,including molecular delivery,surfactants,and multicolor encoding.This review will provide a complete summary of the optimization and the synthesis method for the recently designed emulsion confined block copolymer assemblies,and also the challenges and limitations this method faces,and the potential solutions in this field.