Objective To determine the mitigating effects of sodium 4-phenylbutyrate(4-PBA) on high-fat diet(HFD)-induced spermatogenesis dysfunction. Methods Male rats(n = 30) were randomly divided into three groups: control, HF...Objective To determine the mitigating effects of sodium 4-phenylbutyrate(4-PBA) on high-fat diet(HFD)-induced spermatogenesis dysfunction. Methods Male rats(n = 30) were randomly divided into three groups: control, HFD, and 4-PBA(HFD +4-PBA). After 13 weeks, rats were euthanized. Testes and epididymis were harvested for further analysis. Sex hormones were detected, and hematoxylin and eosin staining was performed to examine the histological changes in the testes. Semen samples were collected to evaluate sperm quality. Spermatogenic cell apoptosis was detected by TUNEL assay. Results Compared with the control group, the final body weight and body weight gain were significantly higher in HFD-fed rats, while the testicle/body weight ratios were lower(P < 0.05). In HFD-fed rats, obvious pathological changes in the testicular tissue were observed. Treatment with 4-PBA attenuated HFD-induced histological damage, ameliorated the HFD-induced decrease in serum testosterone(T), and reduced the rate of testicular cell apoptosis(P < 0.05) in obese male rats. Finally, 4-PBA significantly improved semen parameters in HFD rats(P < 0.05). Conclusion HFD exposure induced detrimental effects on spermatogenesis, semen quality, serum T level, and testicular cell apoptosis in rats. Treatment with 4-PBA ameliorated HFD-induced impaired spermatogenesis via inhibition of apoptosis in rats. 4-PBA may have therapeutic value in the treatment of obesity-related impairment of spermatogenesis.展开更多
In-situ XRD,^(31)P NMR and ^(23)Na NMR were used to analyze the interaction behavior of Na_(3)V_(2)(PO_(4))_(3) at low voltage,and then a new intercalation model was proposed.During the transition from Na_(3)V_(2)(PO_...In-situ XRD,^(31)P NMR and ^(23)Na NMR were used to analyze the interaction behavior of Na_(3)V_(2)(PO_(4))_(3) at low voltage,and then a new intercalation model was proposed.During the transition from Na_(3)V_(2)(PO_(4))_(3) to Na_(4)V_(2)(PO_(4))_(3),Na ions insert into M1,M2 and M3 sites simultaneously.Afterwards,during the transition of Na_(4)V_(2)(PO_(4))_(3)to Na_(5)V_(2)(PO_(4))_(3),Na ions mainly insert into M3 site.展开更多
Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation...Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation during sodium ion de-intercalation and the main frame mechanism remains unchanged,and thus is seen as an energy storage material for a wide range of applications,but has a limited electronic conductivity due to its structure.In this paper,NVP cathode materials with finer primary particles are successfully prepared using a simple hydrothermal treatment-assisted sol-gel method.The increased pore size of the NVP materials prepared under the hydrothermal process allows for more active sites and more effective resistance to the volume deformation of sodium ions during insertion/extraction processes,effectively facilitating the diffusion of ions and electrons.The Na_(3)V_(2)(PO_(4))_(3) material obtained by the optimized process exhibited good crystallinity in XRD characterization,as well as superior electrochemical properties in a series of electrochemical tests.A specific capacitance of 106.3 mAh g^(-1) at 0.2 C is demonstrated,compared to 96.5 mAh g^(-1) for Na_(3)V_(2)(PO_(4))_(3) without hydrothermal treatment,and cycling performance is also improved with 93%capacity retention.The calculated sodium ion diffusion coefficient(DNa=5.68×10^(-14))obtained after EIS curve fitting of the improved sample illustrates that the pore structure is beneficial to the performance of the Na_(3)V_(2)(PO_(4))_(3)cathode material.展开更多
A new one-dimensional double chain coordination polymer, [Na(cbsH)(H2O)3]n (cbsH = 4-carboxy-benzenesulfonic anion), has been synthesized by aqueous reaction, structurally described, and thermally characterized....A new one-dimensional double chain coordination polymer, [Na(cbsH)(H2O)3]n (cbsH = 4-carboxy-benzenesulfonic anion), has been synthesized by aqueous reaction, structurally described, and thermally characterized. It crystallizes in the triclinic system, space group P with a = 5.645(4), b = 7.905(5), c = 13.043(8) , α = 89.391(7), β = 80.637(7), γ = 82.845(7)°, V = 569.8(6) 3, Z = 2, C7H11NaO8S, Mr = 278.21, Dc = 1.622 Kg/m3, F(000) = 288, R = 0.0260 and wR = 0.0697. The title compound consists of one-dimensional double chains. 4-Carboxy-benzenesulfonic acid acts as a bridging bidentate ligand to link two sodium(I) ions to form a binuclear structure. Remarkably, the sodium(I) ion behaves as a metal bridge so that the binuclear structure units are connected to construct a one-dimensional double chain polymer. Furthermore, a 3-D framework is assembled through intermolecular hydrogen bonds. Thermogravimetric analysis shows that this compound begins losing the free solvent molecules at 106 ℃ and decompounding completely at 580 ℃.展开更多
The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability i...The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability is severely limited by the sluggish sodiation/desodiation reaction kinetics. Herein, NiCo_2O_4 double-shelled hollow spheres were synthesized via a microwave-assisted, fast solvothermal synthetic procedure in a mixture of isopropanol and glycerol, followed by annealing. Isopropanol played a vital role in the precipitation of nickel and cobalt,and the shrinkage of the glycerol quasi-emulsion under heat treatment was responsible for the formation of the double-shelled nanostructure. The as-synthesized productwas tested as an anode material in a sodium ion battery,was found to exhibit a high reversible specific capacity of 511 m Ahg^(-1) at 100 m Ag^(-1), and deliver high capacity retention after 100 cycles.展开更多
With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges o...With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges on its poor intrinsic electronic conductivity and the controversial de/sodiation mechanism.Herein,a series of Zr-doped NVPF coated by N-doped carbon layer(~5 nm in thickness,homogenously)materials are fabricated by a sol-gel method,and the optimized heteroatom-doping amounts of Zr and N doping improve intrinsic properties on enlarging lattice distance and enhancing electronic conductivity,respectively.Specifically,among all samples of Na_(3) V_(2-x)Zr_(x)(PO_(4))_(2) F_(3)/NC(NVPF-Zr-x/NC,x=0,0.01,0.02,0.05,and 0.1),the optimized electrode of NVPF-Zr-0.02/NC delivers high reversible capacities(119.2 mAh g^(-1) at0.5 C),superior rate capability(98.1 mA h g^(-1) at 20 C)and excellent cycling performance.The structural evolution of NVPF-Zr-0.02/NC electrode,in-situ monitored by X-ray diffractometer,follows a step-wise Na-extraction/intercalation mechanism with reversible multi-phase changes,not just a solid-solutionreaction one.Full cells of NVPF-Zr-0.02/NC//hard carbon demonstrate high capacity(99.8 mA h g^(-1) at 0.5 C),high out-put voltage(3.5 V)and good cycling stability.This work is favorable to accelerate the development of high-performance cathode materials and explore possible redox reaction mechanisms of SIBs.展开更多
Na4EDTA and EDTA were adopted as new additives to intensify the seeded precipitation process of sodium aluminate solution. The effects of the two additives at certain concentrations on the seeded precipitation rate of...Na4EDTA and EDTA were adopted as new additives to intensify the seeded precipitation process of sodium aluminate solution. The effects of the two additives at certain concentrations on the seeded precipitation rate of sodium aluminate solution, particle size distribution (PSD) and morphology of precipitated gibbsite were investigated using titration method, particle size analyzer and scanning electron microscope (SEM), respectively. The results show that the two additives can accelerate the seeded precipitation rate of sodium aluminate solution. At relatively high concentration, the facilitative effect of EDTA on sodium aluminate solution is more obvious than that of Na4EDTA. EDTA makes gibbsite particles thinner than Na4EDTA. The Na+ and H+ result in the different effects on the seeded precipitation rate of sodium aluminate solution in spite of the same EDTA anion in the two additives.展开更多
Sodium alkyl thiosulfates(Bunte salts) can be readily reduced to the corresponding disulfides with TiCl4/Sm system in good to excellent yields under mild conditions
基金supported by the National Natural Science Foundation of China [Grant No.81703230]the Key Scientific Research Project of Universities in Henan Province [Grant No.16B330001 and No.17A330005]
文摘Objective To determine the mitigating effects of sodium 4-phenylbutyrate(4-PBA) on high-fat diet(HFD)-induced spermatogenesis dysfunction. Methods Male rats(n = 30) were randomly divided into three groups: control, HFD, and 4-PBA(HFD +4-PBA). After 13 weeks, rats were euthanized. Testes and epididymis were harvested for further analysis. Sex hormones were detected, and hematoxylin and eosin staining was performed to examine the histological changes in the testes. Semen samples were collected to evaluate sperm quality. Spermatogenic cell apoptosis was detected by TUNEL assay. Results Compared with the control group, the final body weight and body weight gain were significantly higher in HFD-fed rats, while the testicle/body weight ratios were lower(P < 0.05). In HFD-fed rats, obvious pathological changes in the testicular tissue were observed. Treatment with 4-PBA attenuated HFD-induced histological damage, ameliorated the HFD-induced decrease in serum testosterone(T), and reduced the rate of testicular cell apoptosis(P < 0.05) in obese male rats. Finally, 4-PBA significantly improved semen parameters in HFD rats(P < 0.05). Conclusion HFD exposure induced detrimental effects on spermatogenesis, semen quality, serum T level, and testicular cell apoptosis in rats. Treatment with 4-PBA ameliorated HFD-induced impaired spermatogenesis via inhibition of apoptosis in rats. 4-PBA may have therapeutic value in the treatment of obesity-related impairment of spermatogenesis.
基金supported by grants from the National Natural Science Foundation of China(No.22272055)multifunctional platform for innovation of ECNU(EPR).
文摘In-situ XRD,^(31)P NMR and ^(23)Na NMR were used to analyze the interaction behavior of Na_(3)V_(2)(PO_(4))_(3) at low voltage,and then a new intercalation model was proposed.During the transition from Na_(3)V_(2)(PO_(4))_(3) to Na_(4)V_(2)(PO_(4))_(3),Na ions insert into M1,M2 and M3 sites simultaneously.Afterwards,during the transition of Na_(4)V_(2)(PO_(4))_(3)to Na_(5)V_(2)(PO_(4))_(3),Na ions mainly insert into M3 site.
文摘Na_(3)V_(2)(PO_(4))_(3)(NVP)cathode material of the sodium ion battery(1 C=117 mAh g-1)has a NASICON-type structure,which not only facilitates the rapid migration of sodium ions,but also has a small volume deformation during sodium ion de-intercalation and the main frame mechanism remains unchanged,and thus is seen as an energy storage material for a wide range of applications,but has a limited electronic conductivity due to its structure.In this paper,NVP cathode materials with finer primary particles are successfully prepared using a simple hydrothermal treatment-assisted sol-gel method.The increased pore size of the NVP materials prepared under the hydrothermal process allows for more active sites and more effective resistance to the volume deformation of sodium ions during insertion/extraction processes,effectively facilitating the diffusion of ions and electrons.The Na_(3)V_(2)(PO_(4))_(3) material obtained by the optimized process exhibited good crystallinity in XRD characterization,as well as superior electrochemical properties in a series of electrochemical tests.A specific capacitance of 106.3 mAh g^(-1) at 0.2 C is demonstrated,compared to 96.5 mAh g^(-1) for Na_(3)V_(2)(PO_(4))_(3) without hydrothermal treatment,and cycling performance is also improved with 93%capacity retention.The calculated sodium ion diffusion coefficient(DNa=5.68×10^(-14))obtained after EIS curve fitting of the improved sample illustrates that the pore structure is beneficial to the performance of the Na_(3)V_(2)(PO_(4))_(3)cathode material.
基金supported by Henan tackle key problem of science and technology (No. 072102270034)
文摘A new one-dimensional double chain coordination polymer, [Na(cbsH)(H2O)3]n (cbsH = 4-carboxy-benzenesulfonic anion), has been synthesized by aqueous reaction, structurally described, and thermally characterized. It crystallizes in the triclinic system, space group P with a = 5.645(4), b = 7.905(5), c = 13.043(8) , α = 89.391(7), β = 80.637(7), γ = 82.845(7)°, V = 569.8(6) 3, Z = 2, C7H11NaO8S, Mr = 278.21, Dc = 1.622 Kg/m3, F(000) = 288, R = 0.0260 and wR = 0.0697. The title compound consists of one-dimensional double chains. 4-Carboxy-benzenesulfonic acid acts as a bridging bidentate ligand to link two sodium(I) ions to form a binuclear structure. Remarkably, the sodium(I) ion behaves as a metal bridge so that the binuclear structure units are connected to construct a one-dimensional double chain polymer. Furthermore, a 3-D framework is assembled through intermolecular hydrogen bonds. Thermogravimetric analysis shows that this compound begins losing the free solvent molecules at 106 ℃ and decompounding completely at 580 ℃.
基金financially supported by the Science Foundation of Sichuan Province(Grant No.2016FZ0070)the Natural Science Foundation of China(NSFC,201476145)the technical support for Materials Characterization from The Analytical and Testing Center of Sichuan University
文摘The ternary transitional metal oxide NiCo_2O_4 is a promising anode material for sodium ion batteries due to its high theoretical capacity and superior electrical conductivity. However, its sodium storage capability is severely limited by the sluggish sodiation/desodiation reaction kinetics. Herein, NiCo_2O_4 double-shelled hollow spheres were synthesized via a microwave-assisted, fast solvothermal synthetic procedure in a mixture of isopropanol and glycerol, followed by annealing. Isopropanol played a vital role in the precipitation of nickel and cobalt,and the shrinkage of the glycerol quasi-emulsion under heat treatment was responsible for the formation of the double-shelled nanostructure. The as-synthesized productwas tested as an anode material in a sodium ion battery,was found to exhibit a high reversible specific capacity of 511 m Ahg^(-1) at 100 m Ag^(-1), and deliver high capacity retention after 100 cycles.
基金the National Natural Science Foundation of China(21975154)the Shanghai Municipal Education Commission(Innovation Program(2019-01-07-00-09E00021)+2 种基金Innovative Research Team of High-level Local Universities in Shanghaisupported by The Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher LearningShanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power。
文摘With great superiorities in energy density,rate capability and structural stability,Na_(3)V_(2)(PO_(4))_(2) F_(3)(NVPF)has attracted much attentions as cathode of sodium ion battery(SIB),but it also faces challenges on its poor intrinsic electronic conductivity and the controversial de/sodiation mechanism.Herein,a series of Zr-doped NVPF coated by N-doped carbon layer(~5 nm in thickness,homogenously)materials are fabricated by a sol-gel method,and the optimized heteroatom-doping amounts of Zr and N doping improve intrinsic properties on enlarging lattice distance and enhancing electronic conductivity,respectively.Specifically,among all samples of Na_(3) V_(2-x)Zr_(x)(PO_(4))_(2) F_(3)/NC(NVPF-Zr-x/NC,x=0,0.01,0.02,0.05,and 0.1),the optimized electrode of NVPF-Zr-0.02/NC delivers high reversible capacities(119.2 mAh g^(-1) at0.5 C),superior rate capability(98.1 mA h g^(-1) at 20 C)and excellent cycling performance.The structural evolution of NVPF-Zr-0.02/NC electrode,in-situ monitored by X-ray diffractometer,follows a step-wise Na-extraction/intercalation mechanism with reversible multi-phase changes,not just a solid-solutionreaction one.Full cells of NVPF-Zr-0.02/NC//hard carbon demonstrate high capacity(99.8 mA h g^(-1) at 0.5 C),high out-put voltage(3.5 V)and good cycling stability.This work is favorable to accelerate the development of high-performance cathode materials and explore possible redox reaction mechanisms of SIBs.
基金Project(20476107) supported by the National Natural Science Foundation of ChinaProject(2005CB623702) supported by the National Basic Research Program of China
文摘Na4EDTA and EDTA were adopted as new additives to intensify the seeded precipitation process of sodium aluminate solution. The effects of the two additives at certain concentrations on the seeded precipitation rate of sodium aluminate solution, particle size distribution (PSD) and morphology of precipitated gibbsite were investigated using titration method, particle size analyzer and scanning electron microscope (SEM), respectively. The results show that the two additives can accelerate the seeded precipitation rate of sodium aluminate solution. At relatively high concentration, the facilitative effect of EDTA on sodium aluminate solution is more obvious than that of Na4EDTA. EDTA makes gibbsite particles thinner than Na4EDTA. The Na+ and H+ result in the different effects on the seeded precipitation rate of sodium aluminate solution in spite of the same EDTA anion in the two additives.
文摘Sodium alkyl thiosulfates(Bunte salts) can be readily reduced to the corresponding disulfides with TiCl4/Sm system in good to excellent yields under mild conditions