Simultaneous determination of some trace metal impurities in high-purity sodium tungstate using coprecipitation and inductively coupled plasma atomic emission spectrometry

A method based on the combination of coprecipitation with inductively coupledplasma atomic emission spectrometry (ICP-AES) was developed for the determination of impurities inhigh-purity sodium tungstate. Six elements (Co, Cu, Fe, Mn, Ni, and Pb) were coprecipitated bylanthanum hydroxide so as to be concentrated and separated from the tungsten matrix. Effects of somefactors on the recoveries of the analytes and on the residual amount of sodium tungstate wereinvestigated, and the optimum conditions for the coprecipitation were proposed. Matrix-matchingcalibration curve method was used for the analysis. It is shown that the elements mentioned abovecan be quantitatively recovered. The detection limits for Co, Cu, Fe, Mn, Ni, and Pb are 0.07, 0.4,0.2, 0.1, 0.6, and 1.3 μg·g^(-1), respectively. The recoveries vary from 92.5% to 108%, and therelative standard deviations (RSDs) are in the range of 3.1%-5.5%.

Effect of sodium tungstate on visual evoked potentials in diabetic rats

AIM： To evaluate the effect of sodium tungstate on visual evoked potentials（VEPs） in diabetic rats.· METHODS： Wistar rats were randomly divided into three groups as normal control, diabetic control and diabetic rats treated with sodium tungstate. Diabetes was induced by single intraperitoneal injection of streptozotocin（50 mg/kg）. Sodium tungstate [40 mg/（kg·d）]was administered for 12 wk and then VEPs were recorded.Additionally, thiobarbituric acid reactive substance（TBARS） levels were measured in brain tissues.·RESULTS： The latencies of P1, N1, P2, N2 and P3 waves were significantly prolonged in diabetic rats compared with control group. Diabetes mellitus caused an increase in the lipid peroxidation process that was accompanied by changes in VEPs. However, prolonged latencies of VEPs for all components returned to control levels in sodium tungstate-treated group. The treatment of sodium tungstate significantly decreased brain TBARS levels and depleted the prolonged latencies of VEP components compared with diabetic control group.· CONCLUSION： Sodium tungstate shows protective effects on visual pathway in diabetic rats, and it can be worthy of further study for potential use.

Expanded Industrial Experiments of Free-alkali Recovery from Sodium Tungstate Solution by the Membrane Electrolysis Process

The expanded industrial experiments were conducted with practical industrial liquor to separate free alkali from sodium tungstate solution by electrolysis with cation-exchange membrane. Experimental results show that on the condition that the temperature is 50-55 degreesC and the current density is 1000 A/m(2), the single electrolysis cell is operated stably and 80% free-alkali in mass fraction is separated from the anode feed liquor of sodium tungstate, with electric efficiency up to more than 88% and the unit energy consumption E lower than 1900 kWh/t; while three electrolysis cells in series are operated, under the condition that the temperature is 60-65 degreesC and the current density is 1000 A/m(2), the electric efficiency can reach higher than 88% and the unit energy consumption E can be lower than 2250 kWh/t.

Effects of sodium tungstate on properties of micro-arc coatings on magnesium alloys

Anodic coatings were prepared by micro-arc oxidation on AZ91HP magnesium alloys in a base solution containing 10 g/L NaOH and 12 g/L phytic acid with addition of 0-8 g/L sodium tungstate.The effects of sodium tungstate on the coating thickness, mass gain,surface morphology and corrosion resistance were studied by eddy current instrument,electronic scales,scanning electron microscope and immersion tester.With the addition of sodium tungstate,the electrolytic conductivity increases and the final voltage decreases.The sodium tungstate has a minor effect on the coating thickness,but lightens the coating color.With increasing sodium tungstate concentration,the size of micropores on the coatings is enlarged and the corrosion resistance of the anodized samples decreases.

Synthesis of Dimethyl-2,6-Naphthalene Dicarboxylate by Esterification Catalyzed by Sodium Tungstate

The process of synthesis of dimethyl-2,6-naphthalene dicaboxylate from esterification of 2,6-naphthalene dicarboxylic acid (2,6-NDCA) by methanol using sodium tungstate as catalyst was investigated. The orthogonal tests method was used for optimizing the process factors. The effects of reaction temperature, mass percentage of catalyst, reaction time and mass ratio of methanol to 2,6-NDCA on the 2,6-NDCA conversion were investigated. It was found that all the four factors had significant effect on the conversion. The optimum reaction conditions were reaction temperature 215 ℃,mass percentage of catalyst 3%, reaction time 3 h, mass ratio of methanol to 2,6-NDCA 6∶1. The 2,6-NDCA conversion at above condition was 92.80%.

Preparation of High－purity Sodium Tungstate from Low－grade Tung－sten－concentrate with a High Content of Calcium and Other Impurities

A new technological process for production of talium tungstate from low-grade tungsten-concentrate witha high content of calcium and other impurities has been studied. The experiments showed that average tungstenleaching efficiency of more than 96. 92 % can be obtained with a low NaOH consumption by using the mechani-cal activating caustic decomposition , and the content of main impurities (P, As, Si) in Na_2WO_4 solution ob-tained is competitive with that from standard wolframite concentrate by traditional caustic decomposition. Afterrecovering caustic liquor by first crystallization, molylxlenum is removed from Na_2WO_4 solution by ion ex-change method. High-purity sodium tungstate is obtained by second crystallization of Na_2WO_4 solution. Thistechnology has the advantages of good adaptability for raw materials, high removing efficiency of impurities,high tungsten recovery and high economic benefit.

Syntheses of DL-threo-Thiamphenicol via Green Oxidation

Four methyl aryl thioethers related to thiamphenicol syntheses and methyl phenyl sulfide were cleanly oxidized into methyl sulfones in high to excellent yields via catalytic green oxidation with aqueous hydrogen peroxide in combination with sodium tungstate. When the same reactions were similarly performed in the absence of the catalyst, the corresponding sulfoxides could be obtained. This viable synthetic approach for the synthesis of DL-threo-thiamphenicol is a simple procedure, which has an economic advantage in view of its application for the large-scale synthesis because it can be carried out under mild conditions.